Best Bore Gage Sets - TopShopReview.com

Fowler 54-646-401-0 Electronic Dial Bore Gage Set with 1.4–6\/35-150mm Range

Accurate Measurements: The bore gage features an electronic indicator with resolution of 0.00005"/.001mm and measuring depth of 9 inches.
Durable Construction: This electronic indicator provides both inch and metric readings.
two-point contact system is used to detect geometry problems such as ovality and taper.
carbide-tipped contact points provide extended wear and improved abrasion resistance.
The easily adjustable bore gage is self-centering and includes a 2-inch contact extension holder.
Minimum Hold Feature: This electric gage locks and holds the bore size as the gage is rocked within the part to be measured.
Set Includes: A storage case, 2 batteries, 15 measuring anvils, 4 spacers and an instruction manual.

ACCURATE MEASUREMENTS: This bore gage features a dial indicator with a graduations of 0.0005" and a measuring depth of 9.5".
EXTENDED RANGE: This 1.4-6" range bore gage, with a two-point contact system, is used for measuring hole diameters and also to detect geometry abnormalities such as ovality and taper.
carbide-tipped anvil contact points provide extended wear and improved abrasion resistance.
SELF CENTERING: The easily adjustable bore gauge is self-centering for fast, accurate measurements.
EASY AND EFFICIENT: This bore gage comes with an insulated grip and a chrome plated handle for easy use..
SET INCLUDES: Set comes with two self-centering measuring heads, an extension holder, spacers, and a fitted case.

Accurate Measurements: This bore gage features a dial indicator with graduations of 0.01mm and a measuring depth of 9.5".
Extended Range: This bore gage with a two-point contact system is used for measuring hole diameters and to detect geometry abnormalities such as ovality and taper.
carbide-tipped anvil contact points provide extended wear and improved abrasion resistance.
Set Includes: A bore gage with an insulated grip, two measuring feet ranging 35-50mm and 50-160mm respectively, 16 interchangeable anvils, spacers for fine adjustment of the range, a 55mm extension holder, and a fitted case.
Self Centering: The easily adjustable bore gauge is self-centering for fast, accurate measurements.
Requires standards for setting nominal sizes (not supplied).

Valuable Application -- Professional Cylinder Dial Bore Gage great for hobby machinists as well as mechanics, it is commonly used to measure many kind of automotive’s parts or cylinders and easily check for ovality or out of roundness. It can measure the interior diameter of a hole at any depth (within its reach), while internal micrometers can only measure to the depth of their contacts..
Technical Features -- Designed 2”-6” Measuring Range, 0.0005” Graduation, 9.5” Measuring Depth. Come with 2″ Contact Extension, 10 x Anvils (, 2.2", 2.4", 2.6", 2.8", 3", 3.2", 3.4", 3.6", 3.8", 4" ), 3 x different size Washers (0.1”, 0.05, 0.02”)Complete set -- The whole set include 1 x Dial Indicator, 1 x Chrome Plated Handle, 1 x Contact Extension, 3 x Washers, 10 x different size Anvils, all parts are collected in a fitted case.

81 pc Grade B Steel Gage Block Set with MFG'S certificate.
Manufactured under carefully controlled conditions allowing for the highest degrees of accuracy when used at a temperature of 68 degrees F. (20 C)..
All gage block sets are assigned serial numbers and accompanied with a certificate of inspection listing the deviation for each block.
Each gage block set meets or exceeds federal specification ASME B89.1.9-2002..
Hardened to HRC 64 / All gage block sets are made to special standard to resist corrosion and defacement.

Multispecification measurement range, 6 piece Telescoping Gage Set, can detect hole (or slot) ID 5/16 "-6"（8mm-150mm）.
Telescoping Gage Set INCLUBE:A - 8 To 12.7 mm 5/16 "To 1/2".
The Telescoping Gage Set is a stainless steel material that prevents rust and extends the life of the Telescoping Gage Set, a satin chrome plated surface that includes the case, contact points of hardened tool steel, Telescoping spring, with a knurled locking knob and a knurled holding area..
Easy-to-adjust to allow the most pinhole gauge on the retractable gauge to enter, groove and groove up to 6 inches deep..

[Size]: Range 2.000"-6.000" diameter, .0005" graduations, 6" depth.
[Industrial Professional High Precision Gage]: Deep cylinder bore gageing to a depth of 10" affords the user the ability to measure out-of-round conditions and tapers of cylinders without the necessity of removing pistons - critical wear area of the cylinder can be reached with this gauge..
[Packing]: Includes all the necessary spacers, interchangeable extensions and ABS storage case.
[Features]: Dial gage contains jeweled bearings.

Bore Gauge: Measures bore to 10" deep, Range 0.7" to 6" diameter. Accuracy: 0.0005" with Crisp Precision Graduations. Includes gage and interchangeable contact points..
Bore Gauge: Carbide tip on measuring plunger. Dial indicator contains jeweled bearings, ABS storage case included.
Micrometer Set: Includes 6 Premium Quality Micrometers with measuring ranges: 0-1.

3pc washers and 11 pc Anvils (1 anvil installed in the bore gage probe and 10 pc in case slot)，No product for two slots is correct ！.
Size includes: 4.0'', 3.8'', 3.6'', 3.4'', 3.2'', 3.0'', 2.8'', 2.6'', 2.4'', 2.2'', 2.0''.
Gad. 0.0005“ Self-centering measuring heads, chrome plated handle and includes extension holder and good quality fitted case.

12 PCS anvils: 1PC 2",1PC 2.2",1PC 2.4",1PC 2.6",1PC 2.8",1PC 3",1PC 3.2",1PC 3.4",1PC 3.6",1PC 3.8",2PCS 4".
[Industrial Professional High Precision Gage]: Bore diameter measurement as deep as 10" enables users to measure the out-of-roundness and taper of cylinders without removing pistons -- critical wear area of the cylinder can be reached with this gauge..
[Packing]: Includes all the necessary spacers, interchangeable extensions and ABS storage case.
[Features]: Dial gage contains jeweled bearings.