Best Bore Sleeve

New Injection Pump 6738-71-1520 4063844 Fit for Cummins 6BT5.9 Engine Zexel

• Includes tools to remove fuel injector sleeves, clean the injector bore and fuel galley, and install injector sleeve cups.
• With the head removed, the slide hammer adapter can be installed to pull the injector.
• Brush set properly cleans the injector bore which is required for the fuel injector sleeve cup installer to properly seat the cup.
• Applications include: 2006-2009 4. 5L Diesel, 2004-2010 6. 0L Diesel.

Cloudray Mechanical Parts Set Inner Sliding Rails 1300x900 Single Head For CO2 Laser engraver Engraving Cutting Machine

• Application size: Stepper motor 8mm to 11mm bore adapter.
• Turbine reducer shaft sleeve 8mm to 11mm bore adapter for worm gear reducer shaft sleeve.

Fleck 60102-20 5600 Piston Assembly Low Water

• Cast iron cylinder sleeve, must bore and hone to finished size..
• See "Product Description" for complete Application List.

Grizzly Industrial G0709-14 x 40 Gunsmithing Gearhead Lathe

• 2 MT#3 dead centers (1 carbide tipped) 1 MT#3 live center 1 MT#5 - MT#3 sleeve 1/2" drill chuck w/ MT#3 arbor.
• Dimensions 51-3/4"H, 71-3/4"L, 30"W Approximate shipping weight 1550lbs 11" face plate.
• Motor 2 HP, 110/220V, single-phase, 20/10 Amps, 60Hz, 1725RPM Number of speeds 8 Range of speeds 70-2000RPM.
• Spindle bore 1-9/16" Spindle nose taper MT#5 Spindle nose D1-5 Camlock D1-5 spindle nose (6 pin) 1-9/16" spindle bore.
• Swing over bed 14" Swing over gap 19-3/4" Swing over cross slide 8-3/4".

uxcell Sleeve Bearings 5mmx8mmx10mm Chrome Steel Oilless Bushing 6pcs

• Size - Bore Diameter: 5mm, Outer Diameter: 8mm, Length: 10mm.
• Material - Chrome steel, smooth surface, high hardness, high load capacity, wear-resistant.
• Function - The bushings can be used for different purposes, such as positioning, wear and vibration reduction, or to isolate the shaft from special media to increase the life of the shaft..
• Application - Steel bushings are suitable for high load and high-speed applications. Sleeve bearings are used in a wide variety of industrial equipment..
• More - They also can be used for reducing bore diameter or replacing worn-out original bushings on wheels..

uxcell Sleeve Bearings 10mm Bore 14mm OD 15mm Length Sintered Iron Self-Lubricating Bushings 12pcs

• Size - Bore Diameter: 10mm, Outside Diameter: 14mm, Length: 15mm.
• Material - Sintered Iron. They are self-lubricating, making them maintenance-free. High wear-resistant and corrosion-resistant..
• Function - The bushings can be used for different purposes, such as positioning, wear and vibration reduction, or to isolate the shaft from special media to increase the life of the shaft..
• Application - Iron bushings are most for applications with high load and lower speeds. Sleeve bearings are used in a vast variety of industrial equipment..
• More - They also can be used for reducing bore diameter or replacing worn-out original bushings on wheels..

uxcell Bearing Sleeve 8mm Bore x 12mm OD x 15mm Length Self-Lubricating Sintered Bronze Bushings 3pcs

• Bore: 8mm, Outside Diameter: 12mm, Length: 15mm.
• Material - Sintered Bronze (copper-tin alloy). They are self-lubricating, making them maintenance-free. High wear-resistant and corrosion-resistant..
• Function - The bushings can be used for different purposes, such as positioning, wear and vibration reduction, or to isolate the shaft from special media to increase the life of the shaft..
• Application - Bronze bushings are most for general-purpose where moderate speeds and loads are present. Sleeve bearings are used in a vast variety of industrial equipment..
• More - They also can be used for reducing bore diameter or replacing worn-out original bushings on wheels..

uxcell Bearing Sleeve 10mm Bore x 16mm OD x 15mm Length Self-Lubricating Sintered Bronze Bushings 6pcs

• Bore: 10mm, Outside Diameter: 16mm, Length: 15mm.
• Material - Sintered Bronze (copper-tin alloy). They are self-lubricating, making them maintenance-free. High wear-resistant and corrosion-resistant..
• Function - The bushings can be used for different purposes, such as positioning, wear and vibration reduction, or to isolate the shaft from special media to increase the life of the shaft..
• Application - Bronze bushings are most for general-purpose where moderate speeds and loads are present. Sleeve bearings are used in a vast variety of industrial equipment..
• More - They also can be used for reducing bore diameter or replacing worn-out original bushings on wheels..

uxcell Bearing Sleeve 6mm Bore x 10mm OD x 6mm Long Self-Lubricating Sintered Bronze Bushings 10pcs

• Bore: 6mm, Outside Diameter: 10mm, Length: 6mm.
• Material - Sintered Bronze (copper-tin alloy). They are self-lubricating, making them maintenance-free. High wear-resistant and corrosion-resistant..
• Function - The bushings can be used for different purposes, such as positioning, wear and vibration reduction, or to isolate the shaft from special media to increase the life of the shaft..
• Application - Bronze bushings are most for general-purpose where moderate speeds and loads are present. Sleeve bearings are used in a vast variety of industrial equipment..
• More - They also can be used for reducing bore diameter or replacing worn-out original bushings on wheels..

Milton S-444 Valve Core Tool

• One end for standard bore, one end for large bore valves.
• Overall length 5" One end for standard bore and other end for large bore Handle length 3" Skincard.
• One end for standard bore, one end for large bore valves..
• Overall length 5" One end for standard bore and other end for large bore Handle length 3" Skin card.

Shars 3/8\ x 6\ SCLCL Left Hand Indexable Boring Bar with CCMT Insert 404-2478 P]

EZshoot Green Laser Sight Green Dot 532nm Rifle Scope with Rail Mount for Outdoor Hunting Shooting - Include Barrel Mount Cable Switch

• 【Green Laser Beam】The bore sight with a clear and bright green laser, the laser bore sight can work well in any weather conditions..
• 【Premium Performance】EZshoot bore sight kit is equipped with Class IIIA, less than 5mW, 632-650nm. This bore sight fits for different light conditions, green laser sight farther than red laser..
• 【Upgraded Battery System】EZshoot bore sight kit inlcudes 2 upgraded laser boresighter CR2 batteries which can be used continuously for up to 4 hours..
• 【Multiple Caliber Adapters】Comes with 9 well-made and compact adapters, the bore sight kit for almost all guns. Perfectly fit various calibers from 0.17 to 0.54, pistols, rifles, shotguns, etc. just select the proper adaptor, place the bore sight in the muzzle. One bore sight kit handles multiple situations, a great value!.
• 【Improved Button Switch Design】EZshoot skilled boresighter craftsmen have been insisting on creating a simple and rugged laser bore sight system, this bore sight kit comes with handy push-button switch design, just lightly press to turn ON/OFF..

uxcell Flange Sleeve Bearings 8mm Bore 12mm OD 12mm Length 16mm Flange Dia 2mm Flange Thickness Sintered Bronze Self-Lubricating Bushing 4pcs

• Size - Bore Diameter: 8mm, Outside Diameter: 12mm, Total Length: 12mm, Flange Diameter: 16mm, Flange Thickness: 2mm.
• Material - Sintered Bronze (copper-tin alloy). They are self-lubricating, making them maintenance-free. High wear-resistant and corrosion-resistant..
• Function - The bushings can be used for different purposes, such as positioning, wear and vibration reduction, or to isolate the shaft from special media to increase the life of the shaft..
• Application - Bronze bushings are most for general-purpose where moderate speeds and loads are present. Sleeve bearings are used in a vast variety of industrial equipment..
• More - They also can be used for reducing bore diameter or replacing worn-out original bushings on wheels..