Categories

Best Boring Bar For Angled Holes

7PCS Carbide Turning Inserts Lathe Threading Tool Set, 12mm Mini Indexable Shank Lathe Drill Bar Turning Tool with Carbide Inserts for Finishing Operations

  • High-Quality Materials: Made of durable high-quality alloy steel materials with hardened and sharp carbide blades for effective processing..
  • Durability and Sharpness: Tungsten carbide blades are tinned to provide long life and sharpness, and have a higher temperature than ordinary steel tools. The turning tool holder is made of high-quality steel and plated with nickel, which has durability, moisture resistance, rust resistance and corrosion resistance..
  • Excellent Cutting Performance: Each tool holder has a cemented carbide insert with a positive cutting angle and a built-in chip breaker, which is very suitable for general cutting operations..
  • Usage Scenarios: It is used for turning inner holes, reaming, boring, etc. Used for semi-finishing machining on the basis of existing holes on boring machines or lathes..
  • Product Packaging: Including Shank Lathe Drill Bar Turning Tool model S12M-SCLCR06 / SER1212H16 / SCL1212H06 / MGEHR1212-2 / SNR0012M11 / SDNCN1212H07 / SDJCR1212H07.
Check Stock

Forstner Bit Set, 5-Piece Forstner Bits Wood Drilling Smooth Flat-Bottomed Pocket Holes in Hard Soft Wood, 3/8" Shank Fit Drills and Drill Presses, Size 1”, 1-7/64”, 1-1/4”, 1-3/8”, 1-1/2"

  • Specifications: 5 pcs of Forstner bits are significantly precise and can produce an extreme clean-cut hole with a flat bottom, diameter size 1”, 1-7/64”, 1-1/4”, 1-3/8”, 1-1/2" (25mm, 28mm, 32mm, 35mm, 38mm).
  • Accomplish Variety of Boring and Cutting Tasks: Forstner Bits Set can be used in creative ways such as drilling holes for Dowels and cup hinges, making Overlapping holes.
  • Precise & Clean: You can use these Forstner bits to create precise clean flat-bottomed and pocket holes without chip in hard and soft wood, polywood, plastic, and other materials.
  • built with 3/8" shank compatible with both drill presses and handheld drills.
  • Using Forstner bit with a drill press: get a clean and plumb hole with minimal effort.
  • 1, Position and Mark the Workpiece and test if it’s even.
  • 2, drill at recommended RPMs 1200~1500 and retract the bit often to cool it.
  • 3, Lower the drill press speed when finish the hole.
  • Cut with handheld drills requires patience and power: 1: Clamp Material, Mark Centre Point &....
Check Stock

ASZLBYM 5/8'' inch CNC Lathe Indexable Turning Tool Holder with Nickel Plated,CNC Heavy-Duty Metal Lathe Bit Set with Tin Coated Carbide Turning Inserts WNMG431 CNMG431 TNMG331 16ER AG60

  • ◆ UNIQUE: Boring Bar suitable for finishing and semi-finishing, good toughness..
  • ◆QUALITY: Boring Bar Lathe high strength and hardness, durable in use, improved the surface gloss of the cutting pieces.
  • ◆FUNCTION: Boring Bar Set suitable for machining steel, reduce the tool grinding cost and improve the cutting efficiency.
  • ◆APPLICATION: Lathe Tools Set tightly impacted bolt, simple structure, often used for small hole machining..
  • ◆GET: 2 Boring Bar( S12M-SDUCR07 + SDJCR1212H07 ) + 2 Wrench + 10 Carbide Inserts ( DCMT070204 ).
Check Stock

Rok Hardware 35mm Hinge Boring Forstner Drill Bit, Blue ROKBB35BLUE

  • PERFECT SIZE - 35mm hinge boring bit for boring concealed cabinet hinge holes.
  • CLEAN HOLES EVERY TIME - Fine blades built into this 35mm forstner bit for euro hinges.
  • Drilling Diameter: 35mm (1.37") Shank Diameter: 9mm (0.35") / Shank Length: 64mm (2.5").
  • Hinge Boring Bit Total Length: 79mm (3.1").
  • Fits most of the leading electric drill sizes in the market..
Check Stock

9pcs 2 Boring Head R8 Shank 1/2 Carbide Boring Bar Set Milling

  • 2" Boring Head With R8 Shank.Head size: 2".Boring bar Hole: 1/2".
  • Cross Hole Dia: 1/2".Maximum Offset: 5/8".Thread: 1.5"-18.Graduations: 0.001/0-50.
  • A micrometer lead screw provides 0.0001" direct reading accuracy and ease of adjusting.
  • Packing including:1pcs 2" Boring Head, 1pcs R8 Shank, 9pcs 1/2" Carbide Boring Bar,3pcs Allen Wrench.
Check Stock

YOYO TOOLS Lathe Turning Tools S08K-SCLCR06 Boring Bar and 5pcs CCMT060204 CCMT2 1.5 Carbide Inserts CNC Lathe Turning Tool S08K-SCLCR06 + 5pcs CCMT060204

  • CCMT060204 CCMT2(1.5) Carbide Inserts : carbide material with CVD coating ,used for machining stainless steel and steel parts.
  • Internal boring bar holder : High quality Steel Durable for Long , strong and durable ,95 degree right hand internal boring bar turning holder, the....
  • Shank Diameter : S08K-SCLCR06: 8mm/0.315'' , Overall Length: 125mm/4.92'' , T8 wrench , M2.5*6 screw , 95 degree right hand internal boring bar....
  • Widely Use: used for Cutting Steel parts and Stainless Steel, simple structure, often used for small hole machining..
  • Package Include : 1Pc S08K-SCLCR06 lathe boring bar with 5pcs CCMT060204 CCMT2(1.5)Carbide Inserts, T8 wrench, M2.5*6 screw.
Check Stock

ASZLBYM 3/4 Lathe Internal Boring Bar Turning Tool Holder S20R-MWLNR08 with Indexable Carbide Turning Insert WNMG432

  • ♥package : 1pc S20R-MWLNR08 boring bar+ 10pcs WNMG432 carbide insert + 1pc wrench..
  • ♥ S20R-MWLNR08 turning boring bar : the cutting direction：right hand , the turning tool bar is made of high-quality alloy steel with Nickel Cotated,which can effectively improve the wear resistance, corrosion resistance and stability of the turning tool bar, for long time use..
  • ♥WNMG432 carbide insert : inserts are made of carbide and the coating material is TiN ,it can be used for finishing or semi finishing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
  • ♥The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..
Check Stock

CHAMDRILLHEAD DRILLING HOLDER .748 TO .783 RANGE, .748 SHANK

  • 13PCS 2" boring head set w/ R8 shank kit includes 9pcs 1/2" boring bars, 1pc R8 handle and 3pcs hex wrenches, all packaged in a solid box for easy storage and carry..
  • 2 Inch boring head with R8 shank, these tools are made of high quality steel with great match of hardness and toughness. Hard and durable for long lasting and trouble free use..
  • Center Distance bt 2 bottom hole: 0.60"..
  • A micrometer lead screw provides 0.0001" direct reading accuracy and ease of adjusting. Perfect for milling machines..
  • Used for processing inner hole surfaces, boring, boring outer circle, boring end face, boring ladder hole, boring hole end face, cutting hole and outer ring groove, etc..
Check Stock

Amana Tool 203351 Carbide Tipped Hinge Boring Drill Bit 35mm Dia x 57mm Long x 10mm Right Hand

  • HINGE BORING BIT – The Amana Tool Carbide Tipped Hinge Boring Bit allows you to bore a recess into your workpiece for cup hinges to be installed..
  • DESIGNED FOR – Boring machine bit (10mm shank) and boring drill bit presses (3/8" shank)..
  • DRILL CLEAN HOLES – Use the boring drill bits for wood and boring drill bits for metalworking, they provide clean and accurate hole cutting every time..
  • PERFECT SIZE – The hinge drill bit features sharp, fine blades for perfect drilling each time. (D) diameter: Boring bit 35 mm. Overall length (L): 57mm. Rotation: right hand..
  • INDUSTRIAL-QUALITY TOOLS – Amana Tool is a worldwide leading tool provider with USA-based corporate headquarters and warehouse, specializing in industrial-quality cutting tools..
Check Stock

Amana Tool 203202 Carbide Tipped Hinge Boring Drill Bit 20mm Dia x 70mm Long x 10mm Shank Right Hand

  • HINGE BORING BIT – The Amana Tool Carbide Tipped Hinge Boring Bit allows you to bore a recess into your workpiece for cup hinges to be installed.
  • DESIGNED FOR – Boring machine bit (10mm shank) and boring drill bit presses (3/8" shank)..
  • DRILL CLEAN HOLES – Use the boring drill bits for wood and boring drill bits for metalworking, they provide clean and accurate hole cutting every time..
  • PERFECT SIZE – The hinge drill bit features sharp, fine blades for perfect drilling each time. (D) diameter: Boring bit 20 mm. Overall length (L): 70mm. Rotation: right hand..
  • INDUSTRIAL-QUALITY TOOLS – Amana Tool is a worldwide leading tool provider with USA-based corporate headquarters and warehouse, specializing in industrial-quality cutting tools..
Check Stock

HGC BT30 Tightening Fixture CNC Tool Holder Tapers For BT30 Machine Tool Handle

  • For use with BXA tool posts 250-200 or 250-222. 10-15" swing..
  • Heavy Duty Boring Bar Holder to holds 3/4" tool with bushing, 1" diameter without bushing.
  • Equipped with a split bushing to accommodate a boring bar of smaller diameter.
  • Precision ground and hardened. Completely sealed for maintenance free operation.
Check Stock

Synergee Multi Grip Barbell – Swiss Bar American Bar – 4 Positions for Angled Neutral Grip – Pressing Lifting & Curls

  • ★ SUPERIOR CONSTRUCTION ★ – The Swiss Bar, the American Bar, the Football Bar, the Multi-Grip… whatever you call it, this bar has got power!....
  • ★ 4 ANGLED GRIPS ★ - Our Multi Grip Barbell comes with 4 alternative grips to allow for angled neutral positions for presses, curls and....
  • ★ EASY ON THE SHOULDERS ★ - Each bar is angled to reduce stress on your shoulders during pressing-heavy workouts or exercises that require a full....
  • ★ WHAT’S IN THE PACKAGE ★ – This barbell is 82” long, weighs 27 LBS and has standard 2” sleeves. Max weight capacity is 450 lbs. This....
  • ★ NO SWEAT GUARANTEE ★ – Leave the sweating and swearing for your training! Buying from Synergee means quick, hassle-free, and caring customer....
Check Stock

ASZLBYM SNR0013M16 CNC Lathe Internal Threading Boring Bar Turning Tool Holder With 10pcs 16IR AG60 Carbide turning insert

  • ♥Package includes ：1PC SNR0013M16 boring bar + 11PCS 16IR AG60 carbide thrading turning insert + 1PC T15 wrench.
  • ♥SNR0013M16 : overall length : 150mm=5.9inch , shank diameter : 13mm=0.51inch, cutting direction : internal thread right cutting.
  • ♥ Thredaing boring bar : The material of the boring bar is 40Cr steel, Widely Use, Tightly impacted bolt, simple structure, often used for small hole machining..
  • ♥16IR AG60 carbide inserts : 16IR AG60 inserts are made of carbide and the coating material is TiN , processing pitch range : 0.5~3.0mm.
  • ♥16IR AG60 carbide inserts Can be used for processing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
Check Stock