Categories

Best Boring Bar For Ferrous Metals

2 inch X 50 YD Sanding Shop Roll 320 Grit

  • Premium aluminum oxide semi-closed coat product for general purpose use.
  • This general purpose material is flexible enough for edges and continuous and durable enough for hard woods and metals.
  • 50 yards of material are on a spool and encased in cardboard dispenser for easy access in shop environments.
  • Great for: hardwood, non ferrous metals (aluminum, titanium, etc), ferrous metals (stainless, etc), composites, paint and finish.
  • Recommended for dry sanding only | Can Be used on damp materials.
Check Stock

SitePro Smart-TRAK 102 Magnetic Locator with Smart-Search Technology

  • Patent Pending smart-search technology indicates polarity and eliminates interference.
  • 1.5x more sensitivity than leading brands with four modes of operation.
  • Large LCD screen for visual search results with signal strength bar graph, sensitivity, volume, and battery level indicator.
  • Waterproof tube (IP67) and tip for locating even in the toughest environments and weather conditions.
  • Locates ferrous metals underground such as manholes, steel covers, septic systems, corner survey markers, cast iron pipes, iron valves, and re-bar.
Check Stock

Red Label Abrasives 1 1/2 inch X 50 YD Sanding Shop Roll, 100 Grit

  • Premium aluminum oxide semi-closed coat product for general purpose use.
  • This general purpose material is flexible enough for edges and continuous and durable enough for hard woods and metals.
  • 50 yards of material are on a spool and encased in cardboard dispenser for easy access in shop environments.
  • Great for: hardwood, non ferrous metals (aluminum, titanium, etc), ferrous metals (stainless, etc), composites, paint and finish.
  • Recommended for dry sanding only | Can Be used on damp materials.
Check Stock

Red Label Abrasives 1 1/2 inch X 50 YD Sanding Shop Roll, 150 Grit

  • Premium aluminum oxide semi-closed coat product for general purpose use.
  • This general purpose material is flexible enough for edges and continuous and durable enough for hard woods and metals.
  • 50 yards of material are on a spool and encased in cardboard dispenser for easy access in shop environments.
  • Great for: hardwood, non ferrous metals (aluminum, titanium, etc), ferrous metals (stainless, etc), composites, paint and finish.
  • Recommended for dry sanding only | Can Be used on damp materials.
Check Stock

Tempo Communications 508S-G Cable and Wire Locator - Locate Wires Behind Walls (Latest Model)

  • 1.5x more sensitivity than leading brands.
  • Large LCD screen for visual search results with signal strength bar graph, sensitivity, volume, and battery level indicator.
  • Waterproof tube (IP67) and tip for locating even in the toughest environments and weather conditions.
  • High-grade waterproof Speaker is water resistant and dust proof to ensure years of dependable operation.
  • Locates ferrous metals underground such as manholes, steel covers, septic systems, corner survey markers, cast iron pipes, iron valves, and re-bar.
Check Stock

Armor Protective Packaging MR5GAL Metal Rescue, 5 gal

  • Water Based Rust Remover, Ferrous Metals for Removal of Oxidation and Brightening of Some Non-Ferrous Metals, Bath, Soak Applications.
  • No Acids, No Caustics, No Health Risks, Non Toxic, Safe on Skin.
Check Stock

Silver Bearing Wire Soldering Paste Welding Jewelry 7.1 Gram

  • This is a new tube of silver bearing solder paste.
  • At warm temperatures the silver bearing solder paste will speed up soldering tasks because it works with the heat of a match or lighter.
  • This works on ferrous and non ferrous metals.
  • Will join 22 different combinations of metals.
Check Stock

3PCS S08K/S10K/S12M- SDUCR07 95 Degree Internal Turning Boring Bar with 10pcs DCMT21.51 DCMT070204 Carbide Turning Inserts for Machining Steel Parts and Stainless Steel Three Holder Set With Inserts

  • ☞Material : DCMT2(1.5)1 carbide Inserts with CVD coating ,55 degree diamond turning inserts ，used for machining stainless steel and steel parts.
  • ☞About the Internal Boring bars: 40Cr common steel with forging process , strong and durable ,95 degree right hand internal turning holder. Screw compression,easy to install and remove.
  • ☞Advantage: Offer long life and faster cutting speed, low friction coefficient, good wear resistance Designed for Steel, cast iron and non-ferrous materials.
  • ☞Application: The Minimum processing aperture is 3-5mm of the boring bar head diameter. Used for turning and finishing on a wide range of materials..
  • ☞Package includes: 3pcs Turning Boring Bars (S08K-SDUCR07 + S10K-SDUCR07 +S12M-SDUCR07 ) + 10pcs DCMT070204 Gold Carbide inserts + 3PCS T8 Wrenches.
Check Stock

Tacklife Smart

  • Accurate and Quick Stud Finder - The ENGiNDOT stud finder can detect 4 materials include wood, ferrous metals, non-ferrous metals, and AC wires. This....
  • Wire Warning & Metal Detection up to 100MM - Electrical wire detection is up to 2 in.(50mm) depth. No matter what detection mode it is in, AC live....
  • Automatic Calibration & 3 Signal Lights- Saving your effort the stud scanner calibrates automatically without pressing the button manually all the....
  • Works on Wallpaper & Fabric too - The stud finder is not just suitable for drywall. It also scans through the surfaces covered in wallpaper, popcorn....
  • Durable Material and Ergonomic Design - Featured soft rubber buttons to provide a comfortable using experience. This stud finder wall scanner comes....
Check Stock

TOMAX 12-Inch 100 Tooth TCG Aluminum and Non-Ferrous Metal Saw Blade with 1-Inch Arbor

  • Ideal for cutting Plastic, Aluminum and Non-Ferrous Metals.
  • Construction grade carbide teeth provide maximum resistance for longer life.
  • Electrophoretic Coating reduces the rusting and corrosion.
  • TCG Grind for a durable and smooth cut on non-ferrous metals, aluminum, and plastic items.
  • Quality Guarantee, Limited Lifetime Warranty by TOMAX.
Check Stock

TOMAX 10-Inch 80 Tooth TCG Aluminum and Non-Ferrous Metal Saw Blade with 5/8-Inch Arbor

  • Ideal for cutting Plastic, Aluminum and Non-Ferrous Metals.
  • Construction grade carbide teeth provide maximum resistance for longer life.
  • Electrophoretic Coating reduces the rusting and corrosion.
  • TCG Grind for a durable and smooth cut on non-ferrous metals, aluminum, and plastic items.
  • Quality Guarantee, Limited Lifetime Warranty by TOMAX.
Check Stock

Rockwell RW8966 Sonicrafter Oscillating Multitool Extended Life Bimetal Wood & Nail End Cut Blade, 1-3/16'

  • Use to make plunge cuts up to 1-5/8-inch deep.
  • Make detail cuts to wood, plastic, fiberglass, nails, non-ferrous metals, thin sheet metal, and Hardened fillers.
  • Hardened teeth will cut non-ferrous metals.
  • Universal fit system adapts to other brands.
Check Stock

10\ Vacuum Brazed Diamond Saw Blades for Metal, 5/8\ Arbor

  • VERSATILE DESIGN - designed to cut the most ferrous metals such as sheet, pipe, bar or studs as well as versatile enough to cut concrete, masonry, plastics, wood.
  • PREMIUM DURABILITY - each diamond blade is constructed with solid steel and can last many times longer than an abrasive wheel while maintaining a constant cutting depth.
  • VACUUM BRAZED - diamond vacuum brazed segmented teeth allows for precise and efficient cutting.
  • COMPATIBILITY - 10 inch diameter with 5/8" arbor.
  • SEGMENT HEIGHT/WIDTH - 5mm segment height, 0.06" segment width.
Check Stock