Best Boring Bar Tool Holder

14 Pieces Lathe Boring Bar Set 4 Pieces 95 Degree S07K/ S08K/ S10K/ S12M-SCLCR06 Lathe Boring Internal Turning Bar Holder with 10 Pieces CCMT0602 Carbide Inserts and 4 Pieces Wrench

  • Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manu....
Check Stock

uxcell Indexable CNC Lathe Turning Tool Holder 93°DVJNR2020K16 3/4 Shank Carbon Steel Carbide Turning Tool Holder for Turning Grooving Threading

  • [Specification] - Cutting Angle: 93°, Cutting Direction: Right, Material: High Steel, Model: DVJNR2020K16, Holder Width: 20mm / 0.79inch, Holder Thickness: 20mm / 0.79inch, Total Length: 125mm / 4.92inch, Available Inserts: VNMG16 Inserts.
  • [Durable to Use] - The material of the turning tool holder is Carbon Steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance..
  • [Finish] - Black oxide smooth finish on each turning tool holder marked with tool holder style and shank size for easy identification of the tool holder..
  • [Wide Range of Applications] - The boring bar is suitable for cutting step surface processing and other processing..
  • [Package Content] - You will receive 1pc indexable lathe turning tool holder(carbide insert not included) and 1pc wrench..
Check Stock

RIDGID 72327 418 Oiler Gun, All-Weather Pipe Threading Oiler Gun with Simple 2-Finger Trigger Design, heavy-duty 1-Gallon Capacity Reservoir and Handy 54-Foot Hose,Silver,Small

  • 1. Material: Steel(Turning Holder)+Carbide(Carbide inserts).
  • Color: Black(Boring Bar)+Golden (Threading Insert).
  • 2. Direction: Right Shank Dia: 13mm=0.51"=1/2".
  • 3. Package: 1pc SNR0013M16+1pc SER1616H16 +5pcs 16ER AG60+5pcs 16IR AG60+2pcs wrenchs.
  • 4. Black oxided smooth finish on each turning tool holder style and shank size. Blades exquisite workmanship, high strength, high toughness, stable and durable..
  • 5. If you need more 16ER AG60 ,please search 【ASIN:B07RB5BKG7】,16IR AG60【ASIN:B07S1WSNJ6】.
Check Stock

1/2\ 5/8\ Boring Bar SNR0013M16+SER1616H16 Lathe Internal Threading Inserts Turning Tool Holder with 5pcs 16ER AG60+5pcs 16IR AG60 Carbide Turning Inserts

  • 1. Material: Steel(Turning Holder)+Carbide(Carbide inserts).
  • Color: Black(Boring Bar)+Golden (Threading Insert).
  • 2. Direction: Right Shank Dia: 13mm=0.51"=1/2".
  • 3. Package: 1pc SNR0013M16+1pc SER1616H16 +5pcs 16ER AG60+5pcs 16IR AG60+2pcs wrenchs.
  • 4. Black oxided smooth finish on each turning tool holder style and shank size. Blades exquisite workmanship, high strength, high toughness, stable and durable..
  • 5. If you need more 16ER AG60 ,please search 【ASIN:B07RB5BKG7】,16IR AG60【ASIN:B07S1WSNJ6】.
Check Stock

7PCS Carbide Turning Inserts Lathe Threading Tool Set, 12mm Mini Indexable Shank Lathe Drill Bar Turning Tool with Carbide Inserts for Finishing Operations

  • High-Quality Materials: Made of durable high-quality alloy steel materials with hardened and sharp carbide blades for effective processing..
  • Durability and Sharpness: Tungsten carbide blades are tinned to provide long life and sharpness, and have a higher temperature than ordinary steel tools. The turning tool holder is made of high-quality steel and plated with nickel, which has durability, moisture resistance, rust resistance and corrosion resistance..
  • Excellent Cutting Performance: Each tool holder has a cemented carbide insert with a positive cutting angle and a built-in chip breaker, which is very suitable for general cutting operations..
  • Usage Scenarios: It is used for turning inner holes, reaming, boring, etc. Used for semi-finishing machining on the basis of existing holes on boring machines or lathes..
  • Product Packaging: Including Shank Lathe Drill Bar Turning Tool model S12M-SCLCR06 / SER1212H16 / SCL1212H06 / MGEHR1212-2 / SNR0012M11 / SDNCN1212H07 / SDJCR1212H07.
Check Stock

Simple Combination Mini Quick Change Tool Post Kit Set For CNC Table/Hobby Lathe Aluminium Material

  • Fits 7x10, 7x12 and 7x14 mini lathes, ACCEPT - Turning Holder: 1/4-3/8" Shank.
  • Using the dial, each tool holder can be rotated multiple angle of 9 ° or 9 °, operations with extension units,can be processed various angles work piece..
  • Mounting hardware include 2x mounting bolts (M8 & M10) 2x Allen Key.
  • Holder include: Two turning tool holders, a boring tool holder, a cut-off blade holder..
Check Stock

YG-1 P15202 Spade Drill Straight Shank Holder, Straight Flute, 0.318\ Shank Diameter, 31/32\-1-3/8\ Drill Insert Range

  • ☞This product is the main accessory of coordinate boring machine, horizontal boring machine, ordinary boring and milling machine, boring and milling CNC machine tools. It can be used for boring, boring outer circle, boring end face, boring stepped hole, boring inner hole end face, cutting inner hole and ring groove on outer circle, etc..
  • ☞Precise control and free adjustment: The scale of the dial is clear, and the circle is divided into 100 equal parts. The movement of each scale is 0.005mm, the diameter is 0.01mm, and the operation is simple..
  • ☞Select material with high hardness. Using 40CrMo material, it has strong rigidity, special surface treatment, high hardness, good seismic performance, suitable for high speed, and guarantees the density of hole processing..
  • ☞The boring range of the complete set of boring tools: 10-150mm, and the diameter of the boring tool bar is 50mm. Precision fine-tuning: 0.01mm (one revolution of 0.02mm), adjustable stroke 20mm. The boring bar easily and directly enters the boring head hole..
  • ☞The refined boring bar is made of alloy steel, which has strength and toughness, good hardenability, and no obvious temper brittleness. After quenching and tempering, it has obvious impact resistance. The taper design of the b....
Check Stock

Toolly 0XA Wedge Type Quick Change Tool Post Set For Mini Lathe up to 6-9 Inch Swing OXA TOOL POST

  • Quickly and easily install on an engine, bench, or turret lathe for a wide range of operations. Fully interchangeable with Aloris, Dorian, Phase II,....
  • This set includes: No. 0 Wedge Type Tool Post(1.75" L x 1.75" W x 2.5" H), No. 1 Turning & Facing Holder(up to 1/2" tool capacity),.
  • No. 2 Boring Turning & Facing Holder (up to 1/2" tool capacity), No. 4 Heavy Duty Boring Holder (3/8" & 1/2" tool capacity),.
  • No. 7 Universal Parting Blade Holder (1/2" tool capacity), No. 10 Knurling, Turning & Facing Holder (up to 1/2" tool capacity)..
  • Stud size is M10 and is perfect for most mini lathes, although modification may be needed for some machines (a bushing or new center stud for a....
Check Stock

OSCARBIDE 5/8”Shank 9 Pieces/Set Indexable Carbide Lathe Turning Tool Holder and Boring Bar,CNC Heavy-Duty Nickel Plated indexable Insert Holders for Turning Grooving Threading Cut Off

  • 5/8” Metal lathe cutting tools includes 1pcs External Parting&Grooving Tool Holder QA10R-30 , 6pcs External Turning tool holder SCBCR,SSSCR,SCLCL,SCLCR,SWGCR,SDNCN ,1pcs SER External Threading Tool Holder,1 pcs S10R-SCLCR Boring Bar.
  • Turning Holders are made of high quality steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general lathe tool holder.
  • Cutters bits are made of carbide with Tin-coated,with positive rake cutting angle and built-in chip breaker for general purpose cutting action.
  • Metal Lathe tools suitable for varied grooving,external/internal turning and threading,for semi-finishing/roughing steel metal.
  • All metal lathe cutting tools and inserts packed in a premuim aluminium carrying case,easy to carry.
Check Stock

OSCARBIDE 3/4”Shank 9 Pieces/Set Indexable Carbide Lathe Turning Tool Holder and Boring Bar,CNC Heavy-Duty Nickel Plated indexable Insert Holders for Turning Grooving Threading Cut Off

  • 3/4” Metal lathe cutting tools includes 1pcs External Parting&Grooving Tool Holder QA12R-30, 6pcs External Turning tool holder SCBCR,SSSCR,SCLCL,SCLCR,SWGCR,SDNCN ,1pcs SER External Threading Tool Holder,1 pcs S12S-SCLCR Boring Bar.
  • Turning Holders are made of high quality steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general lathe tool holder.
  • Cutters bits are made of carbide with Tin-coated,with positive rake cutting angle and built-in chip breaker for general purpose cutting action.
  • Metal Lathe tools suitable for varied grooving,external/internal turning and threading,for semi-finishing/roughing steel metal.
  • All metal lathe cutting tools and inserts packed in a premuim aluminium carrying case,easy to carry.
Check Stock

YOYO TOOLS Lathe Turning Tools S08K-SCLCR06 Boring Bar and 5pcs CCMT060204 CCMT2 1.5 Carbide Inserts CNC Lathe Turning Tool S08K-SCLCR06 + 5pcs CCMT060204

  • CCMT060204 CCMT2(1.5) Carbide Inserts : carbide material with CVD coating ,used for machining stainless steel and steel parts.
  • Internal boring bar holder : High quality Steel Durable for Long , strong and durable ,95 degree right hand internal boring bar turning holder, the....
  • Shank Diameter : S08K-SCLCR06: 8mm/0.315'' , Overall Length: 125mm/4.92'' , T8 wrench , M2.5*6 screw , 95 degree right hand internal boring bar....
  • Widely Use: used for Cutting Steel parts and Stainless Steel, simple structure, often used for small hole machining..
  • Package Include : 1Pc S08K-SCLCR06 lathe boring bar with 5pcs CCMT060204 CCMT2(1.5)Carbide Inserts, T8 wrench, M2.5*6 screw.
Check Stock

ASZLBYM 3/4 Lathe Internal Boring Bar Turning Tool Holder S20R-MWLNR08 with Indexable Carbide Turning Insert WNMG432

  • ♥package : 1pc S20R-MWLNR08 boring bar+ 10pcs WNMG432 carbide insert + 1pc wrench..
  • ♥ S20R-MWLNR08 turning boring bar : the cutting direction:right hand , the turning tool bar is made of high-quality alloy steel with Nickel Cotated,which can effectively improve the wear resistance, corrosion resistance and stability of the turning tool bar, for long time use..
  • ♥WNMG432 carbide insert : inserts are made of carbide and the coating material is TiN ,it can be used for finishing or semi finishing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
  • ♥The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..
Check Stock

Turning Insert Holder SVJCL 1212H 11, with 1PCS Insert VBMT 221 (VBMT110304), Square Shank, Steel, External, Screw Clamp, Left Hand, 12mm Width x 12mm Height Shank, 100mm Length.

  • 3/8"Metal lathe tools include 1pcs External Parting&Grooving Tool Holder QA08R-20,6pcs External Turning tool holder SCBCR,SSSCR,SCLCL,SCLCR,SWGCR,SDNCN ,1pcs SER External Threading Tool Holder,1 pcs S06M-SCLCR Boring Bar.
  • Turning Holders are made of high quality steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general lathe tool holder.
  • Cutters bits are made of carbide with Tin-coated,with positive rake cutting angle and built-in chip breaker for general purpose cutting action.
  • Metal Lathe tools suitable for varied grooving,external/internal turning and threading,for semi-finishing/roughing steel metal.
  • Replacement inserts of this kit , please search the Asin of this item: B0875TPL4Y on Amazon to buy it. All holders and inserts packed in a premuim aluminium carrying case,easy to carry.
Check Stock