Categories

Best Boring Drill Bits

Ryobi A98901G 90 Piece Drilling and Driving Kit for Wood, Metal, Plastic, and Masonry

  • BLACK OXIDE DRILL BITS: 21 of these to help with your hole-boring needs.
  • MASONRY BITS: Used for drilling into brick, block, and mortar.
  • HOLE SAWS: 4 of these included to help boring large holes for locks or other applications.
  • FASTENER BITS: 27 bits are included for driving in fasteners. There is also a magnetic bit holder to hold these.
  • STORAGE BOX: The plastic carrying case comes with a locking system and labeled compartments to keep your bits organized upon purchase.
Check Stock

VEVOR Mag Drill, 0-300 RPM Stepless Speed Electromagnetic Drill Press, 2\ Depth 2\ Dia Magnetic Core Drill, 2922lbf Boring Tool Drill Press, 1680 Watts Drill Press, Yellow and Black Drill Machine

  • 1680W Strong Power: Built to stand by you on toughest job sites. Powerful motor: 1680W, 110V, 60HZ, 10A. Max Boring Depth: 2inch/50mm. Max Boring Diameter: 2inch/50mm. Max Travel Distance: 8.5inch/216mm. Main function: drilling and coring. Besides, our magnetic drill can only be used with hollow boring bits, not with annular bits..
  • Stepless Speed & Cooling System: Our magnetic base drill bores at 0 - 300RPM. Its stepless speed control knob provides a more precise speed. Coolant tank with 300 mL capacity, dustproof air inlet, and exhaust air holes are designed for cooling the magnetic drill press during overheating..
  • Powerful Magnet: The electromagnetic base is made of almost pure iron and has a strong magnetic force up to 2922lbf/13000N, ensuring that the machine does not move during drilling..
  • Considerable Details: Ergonomically designed lifting handle, three extended crank handles coated with nonslip rubber and external carbon brush allow you to operate the mag drills with minimum effort..
  • Versatile Application: This versatile mag drill press is ideal for ship & bridge building, industrial and steel fabrication, windmill & power-plant construction, railway manufacture, equipment installation, and many other fields..
Check Stock

Woodowl 04181 1/4″ x 18″ Bellhanger Installation Drill Bit HRC 59 Induction Hardened Steel (1/4″ x 18″)

  • Bellhanger bits are the bit of choice for installing all types of small wire systems including stereo, cable, computer, phone and security.
  • These bellhanger bits are precision milled and ground producing bits that are perfectly concentric with very little wobble. They will drill accurate diameter holes, require less energy to power through wood and produce less heat. They will also drill straight and true through all types of wood with minimal wandering..
  • The tip has a small hole that enables wire to be attached and pulled through long holes in walls, floors and ceilings.
  • Cutting heads are fully induction hardened to 58 HRC making them perfect for boring holes in wood, plaster, lathe and light masonry.
  • These bits feature quick release hex shanks for fast bit change-outs with secure gripping surfaces in drill chucks.
Check Stock

12 inch Extra Long Brad Point Drill Bit Set with 7 Total Drill Bits • Ideal for Wood • PVC • Resin • Composite • MDF and Drywall (Sheet Rock) Materials

  • Sometimes bigger is better and when it comes to drilling or boring into thick material, bigger is definitely better. Introducing the Fulton high speed steel extra long brad point drill bit set. Each bit measures around 12 inches in total length to provide you with enough drilling length to tackle most any project you can throw at them..
  • Many times when working around the house or out on the job site, we come across a situation where we need to drill through thicker material like a 6 x 6 or 4 x 4 when building things like an privacy fence or even rough building applications. These Fulton extra long brad point drill bits are perfect for these situations!.
  • Made from high speed steel, these bits are ideal for many different project types and materials. Drill into MDF, 4 x 4’s, 6 x 6’s, PVC, Resin’s, Composites, Plywood and more. Since each bit has a sharp (brad point) tip, it is recommended that you do NOT use these bits to drill into metal objects..
  • Brad Point drill bits are specifically designed for better hole location accuracy. The sharp point on the tip allows you to precisely locate your mark with the bit and with a little pressure, the bit won’t slip or walk as you initiate the drilling process. This makes brad point drill bits excellent....
Check Stock

Hinge Boring Bit Hole Cutter Drill Bit, High-Grade Carbide Tipped Boring Bits for Wood, Plywood, Melamine - Cutting Diameter: 16.5 mm, Overall Length: 70 mm, Right Handed Rotation

  • High-grade tungsten carbide hinge boring bits offer Sharp-cutting, high tolerances, longevity and durability.
  • Hole cutter bits perfectly drill accurate fine circular holes in plywood, hardwood, soft wood, and other composite solid material.
  • Cylinder boring bit best suited for industrial wood processing, model making, installation of hinge, spherical door handle, drawer handle.
  • These hinge hole cutters come with a shank diameter of 10 mm, 57 mm to 70 mm in length, and 14.3 mm to 58.0 mm cutting diameters.
  • Easy to install, and easy to use! All bits can be used on manual as well as automatic multi-spindle boring machines. Order now!.
Check Stock

Mophorn 1100W Magnetic Drill Press with 1-1/2 Inch (40mm) Boring Diameter MD40 Magnetic Drill Press Machine 2810 LBS Magnetic Force Magnetic Drilling System 670 RPM with 6 Pcs HSS Annular Cutter Kit

  • ...r Performance: Our portable drill press generates exceptionally strong power thanks to its 1100W copper motor. It is capable of drilling into the toughest materials at 550 RPM. Maximum Coring Diameter: 1.57'' (40 mm).
  • Maximum Travelling Distance: 4.92"/125mm. Besides, our magnetic drill can only be used with hollow boring bits, not with annular bits..
  • Premium Coring Bits : There are 6 chisel bits: 0.47"/12mm, 0.63"/16mm, 0.71"/18mm, 0.79"/20mm, 0.94"/24mm, 1.02"/26mm, meeting a variety of demands for coring..
  • 12,000N Magnetic Force: The powerful two-stage magnet can generate 12,000 N of holding force, ensuring the drill press machine will not move in the work. Thanks to its Electromagnet base, our magnetic drill press anchor itself securely during use through its solid iron bottom..
  • Thoughtful Designs & Cooling System: This ergonomic design handle provides comfortable grip in operation and transport. These 3 extended crank handles are coated with nonslip rubber for laborsaving operation. Coolant tank, dustproof air inlet, and exhaust air holes are designed for cooling the magnetic drill press during overheating..
  • Various Applications: This versatile magnetic drill press is immensely suitable for industrial and steel fabrication, ship or bridge building, ....
Check Stock

Forstner Bit Set, 5-Piece Forstner Bits Wood Drilling Smooth Flat-Bottomed Pocket Holes in Hard Soft Wood, 3/8" Shank Fit Drills and Drill Presses, Size 1”, 1-7/64”, 1-1/4”, 1-3/8”, 1-1/2"

  • Specifications: 5 pcs of Forstner bits are significantly precise and can produce an extreme clean-cut hole with a flat bottom, diameter size 1”, 1-7/64”, 1-1/4”, 1-3/8”, 1-1/2" (25mm, 28mm, 32mm, 35mm, 38mm).
  • Accomplish Variety of Boring and Cutting Tasks: Forstner Bits Set can be used in creative ways such as drilling holes for Dowels and cup hinges, making Overlapping holes.
  • Precise & Clean: You can use these Forstner bits to create precise clean flat-bottomed and pocket holes without chip in hard and soft wood, polywood, plastic, and other materials.
  • built with 3/8" shank compatible with both drill presses and handheld drills.
  • Using Forstner bit with a drill press: get a clean and plumb hole with minimal effort.
  • 1, Position and Mark the Workpiece and test if it’s even.
  • 2, drill at recommended RPMs 1200~1500 and retract the bit often to cool it.
  • 3, Lower the drill press speed when finish the hole.
  • Cut with handheld drills requires patience and power: 1: Clamp Material, Mark Centre Point &....
Check Stock

Mophorn 980W Magnetic Drill Press with 1-1/3 Inch (35mm) Boring Diameter Magnetic Drill Press Machine 2700 LBS Magnetic Force Magnetic Drilling System 680 RPM Portable Electric Magnetic Drill Press

  • ...uperior Performance: Our portable drill press generates exceptionally strong power thanks to its 980W copper motor. It is capable of drilling into the toughest materials at 680RPM. Maximum Coring Diameter: 1.38"/35mm.
  • Maximum Travelling Distance: 4.92"/125mm. Besides, our magnetic drill can only be used with hollow boring bits, and annular bits less than 0.3"/8 mm in diameter..
  • Useful Accessory Kit: We provide you a rust-proof stainless steel cooling pot with the capacity of 21.36 Cubic Inch/350ml and a pilot pin. The pilot pin can remove screws and assist in the installation & removal of bits..
  • 10,000N Magnetic Force: The powerful two-stage magnet can generate 10,000 N of holding force, ensuring the drill press machine will not move in the work. Thanks to its Electromagnet base, our magnetic drill press anchor itself securely during use through its solid iron bottom..
  • Thoughtful Designs & Cooling System: This ergonomic design handle provides comfortable grip in operation and transport. These 3 extended crank handles are coated with nonslip rubber for laborsaving operation. Coolant tank, dustproof air inlet, and exhaust air holes are designed for cooling the magnetic drill press during overheating..
  • Various Applications: This versatile magnetic drill pre....
Check Stock

Blum M31.1000 Eco Drill Hinge Jig with Bit & Driver, Heavy Duty

  • Driven by electric or cordless hand drill (14 volt min).
  • Each drill bit driven separately and retracts automatically.
  • Clamps to various door thicknesses (up to 44 mm thick).
  • Supplied with 1 - 35 mm bit, 2 - 8 mm bits and 2 drivers.
Check Stock

Mophorn 1550W MD50 Magnetic Drill 500 RPM Spindle Speed Electric Magnetic Drilling System with 2 Inch Boring Diameter and 2900 LBS Magnet Force

  • Superior Performance: Our portable drill press generates exceptionally strong power thanks to its 1550W copper motor. It is capable of drilling into the toughest materials at 500 RPM. Maximum Coring Diameter: 2"/50mm.
  • Maximum Travelling Distance: 8.3"/210mm. Besides, our magnetic drill can only be used with hollow boring bits, not with annular bits..
  • Useful Accessory Kit: We provide you a rust-proof stainless steel cooling pot with the capacity of 30.51Cubic Inch /500ml. The cooling system avoids the risk of damage due to dust entering the machine..
  • 13,000N Magnetic Force: The powerful two-stage magnet can generate 13,000 N of holding force, ensuring the drill press machine will not move in the work. Thanks to its Electromagnet base, our magnetic drill press anchor itself securely during use through its solid iron bottom..
  • Thoughtful Designs & Cooling System: This ergonomic design handle provides comfortable grip in operation and transport. These 3 extended crank handles are coated with nonslip rubber for laborsaving operation. Coolant tank, dustproof air inlet, and exhaust air holes are designed for cooling the magnetic drill press during overheating..
  • Various Applications: This versatile magnetic drill press is immensely suitable for industrial and ste....
Check Stock

VEVOR Magnetic Drill, 200-550RPM Stepless Speed Electromagnetic Drill Press, 2.16\ Depth 1.57\ Dia Magnetic Core Drill, 2700LBS Boring Tool Drill Press, 1100W Drill Press, Yellow & Black Drill Machine

  • ...: Our portable drill press generates exceptionally strong power thanks to its 1100W copper motor. It is capable of drilling into the toughest materials at 200-550RPM. Maximum Coring Diameter: 1.57inches / 40mm.
  • Maximum Travelling Distance: 4.92inches / 125mm. Besides, our magnetic drill can only be used with hollow boring bits, not with annular bits..
  • Stepless Speed & Cooling System: Our magnetic base drill bores at 200-550RPM. Taking advantage of the panel is beneficial to achieve stemless speed regulation of the drill press. Our coolant tank effectively helps your rig get rid of the overheating..
  • 12000N Magnetic Force: The powerful two-stage magnet can generate 12,000 N of holding force, ensuring the drill press machine will not move in the work. Thanks to its Electromagnet base, our magnetic drill press anchor itself securely during use through its solid iron bottom..
  • User-friendly Design: This ergonomic design handle provides comfortable grip in operation and transport. These 3 extended crank handles are coated with nonslip rubber for laborsaving operation. Coolant tank, dustproof air inlet, and exhaust air holes are designed for cooling the magnetic drill press during overheating..
  • Various Applications: The electromagnetic drill press plays a vitall....
Check Stock

This is Not A Drill Funny Carpenter Woodworking Mens T-Shirt

  • FTG 4TO12P has Bits Secured with Pin. Drill bits designed as reliable woodworking tools. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Countersink drill bit set for wood with tapered drill bit, 4 Flute cutter, 5 size drill bits sets with countersink #4(7/64") #6(9/64") #8(11/64") #10(3/16") #12(7/32") 2 Stop Collar, 1 Allen Wrench. Counter-bore, and wood plugs size 3/8" and 1/2".
  • Bits Secured with Pin Never Come Loose from shank. Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • DRILL PERFECT tapered hole drill bit every time. Wood drill bit set with counter bore chamfer angle 82-degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood....
Check Stock

FTG USA Wood Countersink Drill Bit Set 5 Pc Countersink Drill Bit #4#6#8#10#12 Countersink Bit for Woodworking, Tapered Drill Bits Secured with Pin to Hex Shank, 2 Stop Collar, 1 Allen Wrench

  • FTG 2337P has Bits Secured with Pin. Drill bits designed as reliable woodworking tools. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Countersink drill bit set for wood with tapered drill bit, 4 Flute cutter, 5 size drill bits sets with countersink #4(7/64") #6(9/64") #8(11/64") #10(3/16") #12(7/32") 2 Stop Collar, 1 Allen Wrench. Counter-bore, and wood plugs size 3/8" and 1/2".
  • FTG BITS SECURED with Pin Never Come Loose from shank. Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • DRILL PERFECT tapered hole drill bit every time. Wood drill bit set with counter bore chamfer angle 82-degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable w....
Check Stock