Categories

Best Botton Head Bolt

Backyard Discovery 10 Foot Wave Slide, Easy One Piece Installation, Yellow

  • 10' (118" actual length) Wave slide is compatible with deck heights of 53 to 60 inches high.
  • Age Range: 3 to 10 - Supports up to 250lbs.
  • Super deep wave slide (actual depth is 10") ensures children remain safe while sliding.
  • Mounting lumber not included - Recommended 5/8 x 1 3/8 x 20 3/8 inches.
  • Mounting hardware not included - Recommended rounded head 5/16” bolt with flat washers and a locking nut (Truss head, Carriage bolt, Pan head bolt would all work.).
  • Strong one piece construction with 3 bolt installation.
  • Limited Lifetime Warranty against cracking and fading.
  • Engineered to meet or exceed ASTM standards (code F1148-19) for intended use in private residential settings. Warranty is applicable for intended use only..
  • Assembled dimensions-118" x 23.5" x 18" - Shipping dimensions -118” x 17” x 26”.
Check Stock

Backyard Discovery 10 Foot Wave Slide, Easy One Piece Installation, Green

  • Compatible with deck heights of 53 to 60 inches.
  • Mounting lumber not included - Required 5/8 x 3/8 x 20 3/8 inches.
  • Mounting hardware not included - Rounded Head 5/16” Bolt x 1 ¼” long with flat washers and a locking nut (Truss head, Carriage bolt, Pan head bolt would all work. ).
  • One-piece construction for easy assembly.
  • Shipping dimensions -118” x 17” x 26”.
  • Limited Lifetime against cracking and fading.
  • Engineered to meet or exceed ASTM standards (code F1148-19) for intended use in private residential settings. is applicable for intended use only..
Check Stock

Rexka 15 pcs Fender Liner Bumper Cover Splash Shield Wheelhouse Liner Bolt Screw Compatible with GM 11570498 Chevrolet Camaro Colorado Corvette Cruze Equinox Silverado Malibu Traverse Cadillac Buick

  • Other Names:Wheelhouse Liner Bolt, Bumper Cover Bolt, Guide Bracket Bolt, Bumper Filler Bolt, Lower Cover Bolt, Flare Retainer, Flare Bolt, Splash Shield Bolt, Upper Cap Bolt, Lower Deflector Bolt, Lower Baffle Bolt, Bumper Cover Upper Bolt, Daytime Run Lamp Bolt, Upper Center Pillar Trim Bolt, Guide Bolt, Lower Grille Upper Bolt, Headlamp Assembly Bolt, Outer Bracket Screw, Reinforcement Bolt, Fog Lamp Assembly Bolt, Inner Grille Bolt, Side Retainer Bolt, Wheelhouse Liner Screw.
  • Other Names: Mount Bracket Bolt, Grille Assembly Upper Bolt, Corner Trim Bolt, Windshield Pillar Trim Bolt, Impact Bar Bolt, Bumper Cover Retainer, Side Impact Bag Bolt, Bumper Cover Lower Bolt, Side Cover Bolt, Center Duct Bolt, Lower Bracket Bolt, Tailpipe Extension Bolt, Absorber Bolt, Inlet Duct Bolt, Console Assembly Bolt, Upper Grille Bolt, Step Pad Bolt, Bracket Bolt, Grille Assembly Bolt, Vent Grille Bolt, Lower Absorber Bolt, Lower Support Bolt,Outer Brace Screw, Bumper Cover Screw,.
  • Replaces GM 11570498 ,Black Finish 4.2 - 1.41 x 20mm, 7mm Indented Hex Head, Loose Washer.
Check Stock

Carriage Bolt 18-8 Stainless Steel 1/2'-13 x 18' Qty-25

  • A carriage bolt has a domed or countersunk head and the shank is topped by a short square section under the head of the bolt..
  • The square section grips into the part being fixed, preventing the bolt from turning when the nut is tightened..
  • Carriage bolts are often used to fasten wood panels or board to masonry or to one another..
  • The square shank of the bolt allows it to lock into place when inserted into a round hole in wood or a square hole in a metal strap, the unthreaded square shank pulls into the wood creating a tight connection..
  • 18-8 Stainless steel is corrosion and rust resistant. 18-8 Stainless steel is considered the fastener industry standard..
Check Stock

Ives FB458 US26D Manual Flushbolt for Metal Door, Satin Chrome Finish

  • When the active door is opened, the lever can be moved to the ‘up’ position, retracting the bolt and allowing the inactive leaf to be opened.
  • When the inactive leaf is closed, the lever can be moved to the ‘down’ position, projecting the bolt into the strike and securely locking the inactive leaf.
  • Round bolt head requires only a punched hole.
  • Special design of guide and flat sided bolt tip to prevent bolt rotation.
  • Bolt throw is 3/4″ with a 7/8″ vertical adjustment.
  • Rod Length is 12″, which is measured from the center of the flush bolt body to the bolt tip.
Check Stock

T Track Hold Down Clamps Woodworking T Slot Clamp 20mm Dog Hole Clamp Quick Acting Aluminum Alloy

  • ...gs, fixtures and some fences that rely on a track system. Having a cam clamp on your router table fence makes is so much easier to make quick adjustments and quickly lock the fence in place..
  • The clamp body is made out of aluminum, measures approximately 1-1/2” long and each clamp has a standard 3” long hex head bolt that works with most standard sizes of t-track (depending on which size Cam Action Clamp you purchase). Be sure to get the correct size for your needs. Typically that means you should check to see what size slot or track you would like to use the clamps in..
  • The Cam Action Clamps are available in ¼” 5/16” and 3/8” hex head bolt sizes. Another nice feature of the Cam Action Clamps is that you can swap the bolts out for different situations..
  • For instance, if you have a slot requiring a T-bolt, you can switch out the ¼” hex head bolt with a ¼” T-bolt. Each cam can exert up to 400 pounds of clamp pressure depending on how you set it..
Check Stock

Thinkpro 26Pcs Bolt Extractor Set and Drill Bit Kit, Multi-Spline Screw Extractors, Easy Out Broken Lug Nut Extraction Socket Set for Damaged, Frozen,Studs,Rusted, Rounded-Off Bolts, Nuts & Screws

  • Solid Construction: The Screw remover kit parts are precisely machined, and made of high-hardness chrome-molybdenum steel. Reverse spiral groove design bending down to provide maximum grip force to easily remove damaged bolts, nuts, and broken screws. The drill bits is made of HHS and the head is designed with a 135° angle. which is not easily worn and has strong penetration. Surface titanium nitride coating, effective anti-corrosion and rust prevention, extending service life..
  • Reverse Spiral Screw Extractors：Reverse spiral cutting cone extractors are designed to be driven into the head of a damaged bolt if its head is no longer usable and a wrench doesn’t “bite” it. The inside edges of the extractors are designed to “cut” into the damaged bolt’s head to allow it to rotate and ultimately extract it..
  • Widely Used: All premium industrial grade bolt extractors are strictly designed. The grip is firm, not easy to fall off, and provides more torque. Have been working around striped, rusted, stuck, and beheaded parts. Suitable for power drills, flat or allen wrenches, tap adapters. Its a must have for any mechanic or even a home owner when you have to assemble something or disassemble something that has a stripped o....
Check Stock

Fel-Pro ES 72856 Cylinder Head Bolt Set

  • Meets or exceeds all original equipment specifications.
  • Application specific design to ensure a perfect fit.
  • Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts.
  • Properly torque bolts per manufactures specifications.
  • Follow recommended tightening sequence for head bolts.
  • Check bolt length for correct application needed.
  • Follow all vehicle manufacturers recommendation procedures for head bolt replacement.
Check Stock

Customized Face Cover Unisex Mouth Protection Bandanas Adjustable for Outdoor Activity

  • Custom Face Cover: Click the botton “customize now” to design your own face covering, upload image/ input text to customize your face bandanas..
  • Soft and Comfortable: 100% POLYESTER MICROFIBER & Protect From Sun Dust Wind Sand. High quality soft and comfortable bandanas, featured with nose....
  • Elastic Ear Straps: Design with elastic ear straps, the magic face scarf covers nose and face comfy and formfitting. Made of double-layer stretchy....
  • One Size Fits: Face Cover Bandanas Feature A Super Stretchy Fabric That Accommodates Most Head Sizes (adults)..
  • Occasion: Music Festivals, themed events, raves, running, hiking, fishing, cycling, motorcycle, climbing, camping, skiing, snowboarding..
Check Stock

Microfiber Feather Duster with Extension Pole, Flexible Bendable Removable Washable Head for Ceiling Blinds Furniture Cars Keyboard, Strong Electrostatic Adsorption Dusters for Home Cleaning, White

  • ➤【ELECTROSTATIC ADSORPTION】- Made of microfiber material, this home dusters has a strong electrostatic adsorption ability Microfiber duster head works like a magnet, absorbing small dust and hair firmly instead of flying away..
  • ➤【EXTENSION POLE】- Holding the handle, rotate clockwise and pull to adjust the length. The stainless steel pole can extend from 29” to 40 ”. It makes this telescopic duster able to easily clean ceilings, ceiling fans, lamps, cobwebs, car, ornaments and etc..
  • ➤【ADJUSTABLE DUSTER HEAD】- Press the PUSH botton, the full circle duster can be adjusted to five angle, help you easily clean hard-to-reach areas. 45° Position Adjustment, clean blinds, corners and other complex psitions. 90° Position Adjustment, clean tall cabinets, lintels and etc..
  • ➤【EASY TO CLEAN】- The cotton head of the duster is detachable, you can hand wash it with warm or low heat water, storage after drying. It can be repeatedly used and still as white as new.
Check Stock

1\ Low Profile Short Walnut Round Cylinder Furniture Legs [5/16\ Bolt] - Set of 4

  • 5/16" Thread Bolt [1" Installable Length].
  • One Piece Bolt with 3/4" Head [Head Doubles as a Foot Protector].
Check Stock

Edelbrock 8552 Head Bolt Kit , Black

  • Hardened and parallel-ground washers are included with 170, 000 PSI.
  • Reduced head eliminates the need for valve train removal.
  • Used on the following Edelbrock heads: EDL-6022, EDL-6025, EDL-6032, EDL-6035, EDL-6037, EDL-6039, EDL-7716, EDL-7721, EDL-7728 and EDL-7729.
  • Can also be used with 351W heads on 289-302 block as long as EDL-9680 bushings are also used.
Check Stock

Cryosurgery Inc. Verruca-Freeze 175mL Kit

  • Please hold on the two buttons navigation botton and on/off/launch botton at the same time when you are starting using the deivce.
  • Note: Only for Professional use and if you want to use it at home, please learn carefully about all about the device . And the user manual is in English..
  • Safety: No any damages or hurts to skin tissues, safe to use..
Check Stock