Categories

Best Bowden Tubing Clips

Genuine Capricorn Premium Bowden Tubing XS Series Bowden Tubing for 1.75mm Filament with Upgraded PC4-M6 and PC4-M10 Pneumatic Fittings for Creality Ender 3/Pro Ender 5 CR-10/10S 3D Printer 1 Meter

  • Creality Capricorn Tube----100% Original Capricorn XS Series tubing.Genuine Capricorn Premium XS bowden Tubing is enhanced with a proprietary blend of high performance additives..
  • Lower Friction----High lubricity additives make XS Series tubing the lowest friction bowden tubing on the market. It developed specifically for 1.75mm filament with an extremely precise internal diameter.The inside diameter of bowden liner is one of the critical feature for the successful print..
  • High Temperature Resistant----High Temperature Resistance due to using only the highest quality PTFE. Our XS tubing will operate at even higher temperatures than our TL.The maximum operating temperature up to 280!.
  • Upgrade Your 3D Printer----Capricorn Premium XS bowden Tubing is officially authorized and guaranteed quality.Using Original Capricorn XS Series tubing make less friction and more responsiveness,means you can save more time.It's really a great way to upgrade your 3D printer with a reasonable prices!.
  • Brass Pneumatic Connector----The PC4-M6 and PC4-M10 pneumatic connector is made of brasss, with small metal teeth,which can tightly coupled.Therefore, it's never leakaged filament during printing..
Check Stock

AMX3d PTFE Teflon Bowden Tube for 1.75 Filament 2.0mm ID/4.0mm OD 1.5 Meters – White Connector Tubing for 3D Printer

  • IMPROVE PRINTS: Regular Bowden tube cleaning can cause wear, and extruder grinding reduces print quality. Replace your filament tubing to enhance....
  • LOW FRICTION:Made from high quality, durable PTFE, the Teflon Bowden tube allows filament to slide better for smoother results..
  • HIGH SPEC: Withstanding temperatures up to 260C, this Bowden connector tubing has a density of 2.15-2.20g/cm3, with a 2mm ID and 4mm OD..
  • FLEXIBLE TUBING: PTFE Bowden tubes offer impressive flexibility – ideal for smoothly tracking the moving 3D printer head. Packaged without ties to....
  • AMX3D ACCESSORIES: The best 3D Prints start with the best tools! AMX3d provides 3D printing partsof the highest quality. If there are any problems....
Check Stock

Creality Official Capricorn Bowden PTFE Tubing Teflon Tube XS Series 1 Meter for 1.75mm Filament with Mold Spring,Pipe Cutter,M6 M8 Pneumatic Joint for Ender 3/3 Pro/5 CR-10/10S/20/20 Pro

  • IMPROVE PRINTS: Regular Bowden tube cleaning can cause wear, and extruder grinding reduces print quality. Replace your filament tubing to enhance....
  • LOW FRICTION:Made from high quality, durable PTFE, the Teflon Bowden tube allows filament to slide better for smoother results..
  • HIGH SPEC: Withstanding temperatures up to 260C, this Bowden connector tubing has a density of 2.15-2.20g/cm3, with a 2mm ID and 4mm OD..
  • FLEXIBLE TUBING: PTFE Bowden tubes offer impressive flexibility – ideal for smoothly tracking the moving 3D printer head. Packaged without ties to....
  • AMX3D ACCESSORIES: The best 3D Prints start with the best tools! AMX3d provides 3D printing partsof the highest quality. If there are any problems....
Check Stock

2 Meters Capricorn Bowden PTFE Tubing XS Series Low Friction for 1.75mm Filament PTFE Teflon Tube Cutter Pneumatic Fittings Silicone Socks and Nozzles for Ender 3/3 Pro/5/5 Pro/ 5 Plus 3D Printer

  • Original Authentic: 100% Original Capricorn XS Series Bowden tubing. High Lubricity Additives make our XS Series tubing the lowest friction Bowden....
  • Precise Print: Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less....
  • Excellent Performance: Capricorn Bowden tubing is designed specifically for 1.75mm filament, the filament is loaded smoothly to the hotend with as....
  • With accessories: PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions....
  • What You Get: 1*2 Meters PTFE Tube, 3*0.4MM Nozzle, 3*Sillicone Cover, 1*Big Fitting, 1* Small Fitting, 1* Tube Cutter. If you have any unsolvable....
Check Stock

Upgrade 3D Printer Extruder Assembled MK8 Hot End Kit with Capricorn PTFE Bowden Tubing for Ender 3/Ender 3 Pro 1.75mm 0.4mm Nozzle

  • Upgrade Extruder Assembled MK8 Hot End Kit with Capricorn PTFE Bowden Tubing.
  • Capricorn PTFE tubing: High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more....
  • Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W.
  • Suitable For Creality ender 3/ender 3 Pro.
Check Stock

Creality Capricorn Bowden Tubing XS Series 1.2M for 1.75MM Filament, with Upgraded PC4-M6 & PC4-M10 Pneumatic Fittings & Hot Bed Die Springs, PTFE Teflon Bowden Tube for Ender 3V2/3/3 Pro 3D Printer

  • 100% Genuine Capricorn XS Bowden TubingCapricorn Premium XS bowden Tubing is enhanced with a proprietary blend of high performance additives. It was developed specifically for 1.75mm filament with an extremely precise 1.9mm 0.05mm internal diameter. Reduces the "wiggle room" or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems..
  • Less FrictionHigh Lubricity Additives makes Capricorn XS Series tubing has the lowest friction than other ordinary bowden tube. More responsiveness, less retraction, more accurate prints, less slippage, wear,and tear on the extruder, and less clogging when printing chunky filaments..
  • Higher Temperature ResistanceHigh Temperature Resistance due to using only the highest quality PTFE. Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. it stands the highest standards for PTFE tubing in all of 3D printing..
  • PC4-M6 And PC4-M10 FittingsPC4-M6 fittings thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of premium copper and plastic, sturdy and durable. PC4-M10 fittings: thread M10/6mm, inner diameter(bla....
Check Stock

Creality Capricorn Bowden PTFE Tubing Tube XS Series 1 Meter 1.75MM Filament with PTFE Teflon Tube Cutter for Ender 3 Ender 3 Pro, Ender 5, Ender 5 Plus CR-10,CR-10V2 3D Printer

  • 100% Original Capricorn XS Serious tubing Original..
  • High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills..
  • Lower retraction means time saved every time the extruder retracts. Over the course of a print, a few milliseconds here and a few there add up to a lot of time saved..
  • 1.9mm 0.05mm Inner Diameter Reduces the "wiggle room," or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems..
  • High Temperature Resistance due to using only the highest quality PTFE. Our XS tubing will operate at even higher temperatures than our TL..
Check Stock

Official Creality Bowden Tube 1M, 3D Printer PTFE Tube Teflon Bowden Tubing Upgrades for 1.75mm Filament Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 Max/Ender 5 Series/CR 10 Series (1M)

  • 【Best Performance】 Creality Bowden tubing is designed specifically for 1.75mm filament with extremely precise inner & outer diameter, the filament is loaded smoothly to the hotend with as little room for error as possible between the extruder and the hotend..
  • 【Compatible with More Filaments】 PTFE Tubing can resist higher temperature than any other tubing, which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. This Capricorn XS tubing can keep working at high temperatures up to 260℃..
  • 【Product Parameter】Teflon tube length: 1 Meter, Inner Diameter: 1.95mm ± 0.05mm , Outer Diameter: 2mm. The optimal inner diameter size is designed to reduce "wiggle room" or flex in the tube, allowing you to print flexible filaments even on the longest Bowden systems..
  • 【Highly Compatible】 Compatible with Creality 3D printer:Ender-3/Ender 3 V2/Ender 3 Pro/Ender 3 Max/Ender-5/Ender 5 Pro/Ender 5 Plus/ Ender-6/CR-10/CR-10S/CR-10 V2/CR-10 V3/CR-10 S4/CR-10 S5..
  • 【Technical Support】Creality pays great attention to the buyer’s user experience. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours..
Check Stock

Creality Capricorn Bowden Tubing 1M Bowden PTFE Tube for 1.75mm Filament with Teflon Tube Cutter 2X PC4-M6 Extruder Fitting & 2X PC4-M10 Hotend Fitting for Ender 3 V2/3/3 Pro/5/CR-10/10S 3D Printer

  • GENUINE UPGRADES: Creality Capricorn XS Serious Bowden PTFE tubing is the lowest friction premium tubing on the market with faster response, less....
  • COMPATIBLE WITH MORE FILAMENTS: This bowden tube is reinforced with a proprietary blend of high-performance additives that can withstand higher....
  • SMOOTHER FILAMENT OUTPUT: Designed for 1.75mm filament, Creality capricorn tubing has extremely accurate inner & outer diameter, and filament loads....
  • BEST ENDER SERIES ACCESSORIES: Teflon tube length: 1 Meter, Inner Diameter: 1.95mm ± 0.05mm , Outer Diameter: 2mm. The optimal inner diameter size is....
  • GREAT PACKAGE: Package comes with two PC4-M6 fittings for the extruder and two PC4-M10 coupler for the hot end, Its 4mm inner diameter is used for the....
Check Stock

[Gulfcoast Robotics] Bowden Collet and Clip Set for 1.75mm Creality All Metal Hotend 5 Pack

  • Bowden collet and clip set are designed for and compatible with the [Gulfcoast Robotics] All Metal Hotend for Creality 3D Printers..
  • Also compatible with the Micro Swiss All Metal Hotend and similar products on the market..
  • Package includes (5) sets of black bowden collets and matching collet clips..
Check Stock

Creality Ender 3 /Pro/V2 3D Printer Assembled Extruder MK8 HotEnd Kit 24V with 0.4mm Nozzle Upgrade with Low Friction Creality-Capricorn Tubing

  • It's 100% Creality Original and Creality-Capricorn PTFE Tubing..
  • Upgrade with Low Friction Creality-Capricorn Original Teflon Tube 40CM..
  • Hotend replacement parts suitable for ender 3, ender-3x, ender-3 pro, Ender 3 V2 3d printer..
  • High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less....
  • Creality-Capricorn tube is far superior to the white PTFE tubing supplied with most 3D printers. Its much smoother to feed filament through. And when....
Check Stock

Sovol Capricorn Bowden PTFE Tubing 1 Meter Tube Cutter XS Series 1.75MM Filament for Creality Ender 3 Ender 3 Pro Ender 5 CR-10,CR-10S 3D Printer

  • 100% Original Capricorn XS Serious tubing Original..
  • High Lubricity Additives make XS Series tubing the lowest friction bowden tubing on the market. More responsiveness, accurate prints， less....
  • Lower retraction will save you more time while the extruder retracts in printing..
  • 1.9mm ± 0.05mm Inner Diameter Reduces the "wiggle room," or buckling, inside the tube, allowing you to print flexible filaments even on the longest....
  • Advanced material of Capricorn XS Series can make it resist higher temperature, Capricorn XS tubing will operate at even higher temperatures than our....
Check Stock

Creality Capricorn 2 Meters XS Series Low Friction PTFE Bowden Tubing for 1.75mm Filament with PTFE Tube Cutter for Creality Ender 3 Ender 3 Pro Cr-10 3D Printer

  • 100% Original Capricorn XS Serious tubing Original.
  • High Lubricity Additives make XS Series tubing the lowest friction bowden tubing on the market. More responsiveness, accurate prints， less....
  • Lower retraction will save you more time while the extruder retracts in printing..
  • 1.9mm ± 0.05mm Inner Diameter Reduces the "wiggle room," or buckling, inside the tube, allowing you to print flexible filaments even on the longest....
  • Advanced material of Capricorn XS Series can make it resist higher temperature, Capricorn XS tubing will operate at even higher temperatures than our....
Check Stock