Categories

Best Bracelet Mandrel

Ring Making Kit with 32 Colors Gemstones and Crystals Chips Beads,1523pcs Yao Huang Crystal Jewelry Making Kit with Jewelry Wire Earring Hooks and Other Jewelry Making Supplies

  • 【Crystal Jewelry Making Kit】Our crystal beads jewelry making kit for jewelry making kit has a total of 1523pcs,including 1280 pcs of crystal chip beads in 32 colors,3 rolls of jewelry copper wires and 2 rolls of elastic bracelet strings , 50pcs head pins,50pcs eye pins, 50pcs open jump rings, 30pcs earring hooks,20pcs White K Buckles,10pcs charm pendants, 10pcs Pandora Large hole beads,3pairs Magnet buckle charms,3pcs alloy spacer beads1pcs file,5pcs lobster clasps,,ring and ring sizer mandrel ..
  • 【32 Colors Ring Making Kit】Our crystal beads ring making kit includes about 1280 pcs crystal chips and gemstones with 32 colors and well packed with a clear 32grids box. These gemstones chip beads for jewelry making are made of natural stones, strong and does not fade, smooth and does not hurt the skin..
  • 【Sufficient Amount Of Jewelry Wires】These crystals for jewelry making come with 5 rolls of jewelry wire with 2 different type-Copper wire and transparent elastic wire . This ring making kit provides two different thickness of elastic wires appro. 0.031inches and 0.02inches for making wire wrapped rings or other DIY crafts. Very easy for wrapping crystals beads.
  • 【Ring Sizer Gauge】Our finger size gauge are made of durable and high quality plastic.....
Check Stock

Boob Enema

  • 【QUICK-CHANGE HEAD】New Quick-change head design allows for easy changing of mandrels and nose pieces. Unique spring loaded mandrel automatically locks the mandrel lock pin for the fastest mandrel changes on the market..
  • 【ERGONOMIC AND SAVE EFFORT】14 inch longer steel arms and ergonomic handles with double compound hinges maximizing leverage, it can save more effort than those normal 13 inches rivet nut tool do, while being compact in design and easy to use compared with 16 inches..
  • 【EXTRA MANDREL LOCK PINS】Parts included 2 mandrel lock pins, 6-piece mandrel & 90-piece rivet nuts ( Metric M6 M8 M10.
  • SAE 1/4-20, 5/16-18, 3/8-16, 15 rivet nuts for each mandrel ). Please note that the M6 mandrel was installed in the gun..
  • 【Hard-Wearing Quality】AOBEN rivet nut tool is made from thick steel and surface is heat-treated to prevent corrosion and increase the durability and strength of the tool. All pieces are packed in a rugged and compact carrying case. Each tool fits snugly into its respective place to prevent moving around and scraping..
  • 【EXTRA LONG WARRANTY】We provide all hand rivet nut tool with 30 days Money-back and 1-Year Guarantee for your satisfaction. If you have any questions about the product, please feel free to contact us, we wi....
Check Stock

Underline the Black

  • 【QUICK-CHANGE HEAD】New Quick-change head design allows for easy changing of mandrels and nose pieces. Unique spring loaded mandrel automatically locks the mandrel lock pin for the fastest mandrel changes on the market..
  • 【ERGONOMIC AND SAVE EFFORT】14 inch longer steel arms and ergonomic handles with double compound hinges maximizing leverage, it can save more effort than those normal 13 inches rivet nut tool do, while being compact in design and easy to use compared with 16 inches..
  • 【EXTRA MANDREL LOCK PINS】Parts included 2 mandrel lock pins, 6-piece mandrel & 90-piece rivet nuts ( Metric M6 M8 M10.
  • SAE 1/4-20, 5/16-18, 3/8-16, 15 rivet nuts for each mandrel ). Please note that the M6 mandrel was installed in the gun..
  • 【Hard-Wearing Quality】AOBEN rivet nut tool is made from thick steel and surface is heat-treated to prevent corrosion and increase the durability and strength of the tool. All pieces are packed in a rugged and compact carrying case. Each tool fits snugly into its respective place to prevent moving around and scraping..
  • 【EXTRA LONG WARRANTY】We provide all hand rivet nut tool with 30 days Money-back and 1-Year Guarantee for your satisfaction. If you have any questions about the product, please feel free to contact us, we wi....
Check Stock

Stainless Steel Expanding Ring Mandrel Set

  • Best-quality ring mandrel made of stainless steel, which withstands sanding much longer than regular steel..
  • Expanding mandrel offers a high level of precision when making rings. Designed to be used in a lathe. Also fits in 1/2" drill chuck..
  • Varied steps offer plenty of space to work on many styles and sizes of rings. Length is short enough to stay true while spinning..
  • Small size mandrel fits ring sizes 4.5 to 7. Medium mandrel fits ring sizes 7.5 to 10.5. Large mandrel fits ring sizes 11 to 13.5..
  • Includes a hex wrench to expand and contract the mandrel. You will soon wonder how you got along without this tool!.
Check Stock

Utoolmart Metal Ring Sizer Mandrel Bracelet Stick Gauge Measuring Jewelry Tool Hammer Set Jewelry Tool

  • 【Jewelry Rubber Mallet】- Jewelry mallet will provide perfect strike without scratching or damaging the surface of materials. Rubber head would not leave traces on the jewelry or damage your jewelry. The head diameter: 25mm. Fine workmanship and high quality..
  • 【Wood Ring Mandrel】- Wood ring mandrel is perfect for ring making and shaping, fix bent rings.great for holding rings for polishing and sanding..
  • 【Metal Ring Mandrel】- Utoolmart metal ring mandrel is made of steel, US size 0-15, come in half sizes.The ring sizes are clearly marked, easy to use and accurate to the size. Great for professional and beginners..
  • 【Perfect Performance】- This is a nice basic ring adjuster repair kit. Great for someone get into jewelry-making as hobby and on-line shopper for ring size determining. Good for fix bent rings, making the bent ring round again..
  • 【Ring Making and Shaping Tool Kit】- Package Include: Wood Ring Mandrel + Jeweler Rubber Hammer + Metal Ring Mandrel +Metal Ring Mandrel..
Check Stock

POP Rivet 18-8 Stainless Steel - 8-8 1/4 x 1/2 Gap 0.376-0.500 Qty-25

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

POP Rivet 18-8 Stainless Steel - 8-12 1/4 x 3/4 Gap 0.626-0.750 Qty-25

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

POP Rivet 18-8 Stainless Steel - 3-2 3/32 x 1/8 Gap 0.032-0.125 Qty-250

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

POP Rivet 18-8 Stainless Steel - 8-6 1/4 x 3/8 Gap 0.251-0.375 Qty-25

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

26PCS Cut-off Wheel Screw Mandrel Set, 2mm/3mm/6mm Screw Mandrel for Rotary Tools (1/8 Shank, 1/4 Shank)

  • 10 PCS 2mm (Approx 5/64)Screw Mandrel 3mm( Approx 1/8) Shank.
  • 10 PCS 3mm (Approx 1/8) Screw Mandrel 3mm ( Approx 1/8) Shank..
  • 3 PCS 6mm (Approx 1/4) Screw Mandrel 3mm (Approx 1/8) Shank.
  • 3 PCS 6mm (Approx 1/4) Screw Mandrel 6mm (Approx 1/4) Shank..
  • The base mandrel is suitable for discs such as diamond cutting wheels, resin cutting wheels and small saw blades..
Check Stock

Gyros Stainless Steel Mandrel, 1/8" Shank, Fits 1/4" Arbor Hole Size Strong and Vibration-Free. Used to Mount Accessories like Miniature Circular Saw Blades, Cut-Off Wheels, etc. onto Rotary Hand Tools.80-18105

  • High-Quality Stainless Steel --- this Gyros Professional Mandrel is made of high-quality stainless steel which is resistant to corrosion and staining, which increases mechanical strength Making it practically strong and durable..
  • Essential and Sturdy Accessory --- Compatible with most rotary tools, this mandrel provides a supportive and sturdy mounting base for sanding, buffing, or cut-off wheels and discs, saw blades, cutting blades, and mini rubber grinding wheels..
  • 1 Mandrel and 2 Washers Included --- Package Includes 4 Pieces - 1 mandrel shank 1 screw head and 2 washers. Fits a ¼” center hole, with a ⅛” straight shank that is compatible with most power rotary tools like the Gyros PowerPro Rotary Tools..
  • Wide range of Uses --- This is the ideal wheel mandrel for use with rotary tool attachments and accessories, Gyros is the preferred brand by many polishers, metal workers, jewelers, hobbyists, craftsmen, and professionals..
  • Proudly made in the USA, for your safety, Make sure that Mandrel is seated correctly with the rotary tool and tightened before use, and always use Gyros Mandrel with proper protective clothing, safety glasses, or face shield..
Check Stock

Pen Mandrel Woodworking Pen Turning Mandrel Parts Woodworking Steel Pen Mandrel Saver Mechanical Accessory Tool Taper Shank #2 Morse Taper

  • Appropriate for many lathes: each wood turning pen mandrel is 7.95 inches in total length, 6 mm/ 0.24 inch in diameter, which is acceptable for most....
  • An adjustable tool: the package includes 1 useful woodworking pen mandrel saver with fine polished, the length of the shaft can be adjusted at will....
  • Firmly use: the mandrel for lathe is made of quality steel material, tough and sturdy, wear resistant and high temperature resistant, which can help....
  • Flexible to use: pen turning accessory is equipped with a bushing that can protect the mandrel from scratches, which can be moved easily and flexibly,....
  • Versatile uses: the lathe mandrel is designed for producing pens, with fine workmanship, which can reduce the off center turning, improving your work....
Check Stock

West Coast Paracord Easy Assistant Mandrel – Complicated Knots Made Simple – Ingenious Design – No Instruction Book Needed (1 Inch)

  • This mandrel is formulated with an ingenious design that will allow you to make complicated knots and turks in numerous styles and sizes. Customize any project without the complicated and lengthy tying..
  • Mandrel comes with pins and a rubber band to help keep cord in place. Mandrels are available in 4 different sizes (3/4 Inch, 1 inch, 1 ½ Inch, and 2 Inches)..
  • There is no instruction guide needed. Instructions are engraved in the mandrel to make for easy use..
  • Mandrel can be used to tie a Turks Head Knot and is great for hammer handles, axe handles, fishing rods, walking sticks, flashlights, golf clubs, umbrella handles, shovel handles and more!.
  • Take knot tying to the next level without the hassle. Forget the chaos of pins falling out, trying to follow patterns, and reading confusing construction, and upgrade to this West Coast Paracord Easy Assistant Mandrel!.
Check Stock