Categories

Best Brake Flexible Hose Assembly

Air Powered Brake Piston Wind Back Tool Pneumatic Brake Caliper Compression Tool Brake Caliper Piston Compressor Rewind Tool Brake Pump Adjusting Tool for Auto Repair

  • ...tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads..
  • Ratcheting Action: Brake piston compression tool provides 360 degree swing.
  • center located ratchet screw creates an even force when compressing the piston to ensure proper alignment and prevent damage to your brake assembly.
  • reverse movement by flipping the switch on the handle tool to retract the compression plate..
  • Easy Reset: Drain the fluids from calipers then remove the caliper and worn brake pads from your rotor assembly.
  • Retract brake caliper press plates to fit inside the caliper cavity.
  • Begin ratcheting slowly and steadily until the pistons have retracted completely.
  • Retract compression plates to remove the disc brake piston tool from the caliper cavity..
Check Stock

Seaboard Air Line Passenger Service: The Streamlined Era

  • Standard Saej844 Air Suspension Horn Train Lowrider Air Brake Tubing 1/4 Air Tube Air Suspension Line 1/4 Pneumatic Tubing.
  • Working Pressure 1mpa.150 Psi Burst Pressure 3 Mpa 435 Psi Working Temperature -40 ℃ ~ +60 ℃ Air Brake Tubing 1/4" Air Hose Nylon Brake Air Line Kit Nylon Brake Line 1/4 Dot Airline Tubing 1/4 Air Brake Line Pnumatic Hose.
  • Pa 12 Nylon Hose. Usage:air Brake System,air Or Fluid Transfer Use With Air Brake Hose 1/4 Dot Tubing.
  • Size:1/4".pipe Thickness 1mm Bending Radius 40mm Air Horn Tubing 1/4 In Air Line.
  • Weight 190gr/10meter.material Polyamide Air Bag Hose 1/4 Air Hose.
Check Stock

Rear Hand Hydraulic Disc Brake Left Hydraulic Brake Master Caliper Assembly Compatible for Chinese Taotao Roketa Sunl 50cc 90cc 110ccc 125cc Go-Kart Dune Buggy Quad ATV Dirt Mini Bike Kinroad 1

  • [Fitment]The brake master caliper assembly compatible for Most Chinese 50cc 90cc 110cc 125cc 150cc 200cc Baja Roketa Taotao Sunl ATV Dirt Bike..
  • [Fit Models]This mini bike hydraulic brake fit models: 50cc, 70cc 90cc 110cc 125cc ATVs..
  • [Size]The brake master caliper assembly mounting Hole:7/8 inch /22mm, caliper distance between hole to hole: 2.5in/63mm, dimension brake hose length:....
  • [Package Include]Package include:1 x rear hydraulic disc brake system caliper..
Check Stock

CertBuy 6 Pack Hose Pliers Pinch, Hose Clamp Tool for Flexible Hoses, Brake Hoses, Fuel Hoses, Gas Lines, Radiator Hoses, Red.

  • ✔ The flexible hose clamp kit is ideal for brake hoses, fuel hoses, gas lines, radiator hoses, lawnmower fuel gas lines and more..
  • ✔ 6 pack (3 sizes) plastic clamp pliers is one reason to choose us, you can get enough hose pliers with right money..
  • ✔ Nylon material makes our hose clamp tool durable and light weight, closing off flexible hoses..
  • ✔ Bright red color makes hose clamp pliers easy to find when you use them, give you convenience..
  • ✔ Lock design plastic tubing clamps pliers, easy to lock different openings..
Check Stock

Omix-Ada 16737.51 Full Brake Line Set for 97-06 Jeep Wrangler

  • Full Brake Line Set: Fits models with front disc brakes and WITHOUT ABS Brakes.
  • Includes pre-bent rigid mild steel brake lines (7 pcs.) with correct threaded fittings from the master cylinder to each of the front wheel / rear drum.
  • Additional Components: Kit does NOT include the flexible rubber hoses (16732.15 – Front Left Hose / 16732.16 – Front Right Hose/ 16733.06 – Rear Hose (1 Required).
  • Omix Replacement Parts: Omix proudly offers a vast collection of OE quality replacement parts for Jeep & Willys vehicles to help keep the Jeep legend alive.
  • OMIX Jeep Parts: Count on OMIX to provide you with proven Jeep replacement and restoration parts like body tubs, drivetrain components, engine components, and anything else for your 1941 to Current Jeep.
  • Five Year Warranty: Our OMIX products are covered by industry leading 5 year warranty providing customers with repair or replacements subject to certain common exclusions.
Check Stock

Allstar ALL42151 Black 3" x 10' Brake Duct Hose

  • Brake duct hose measures 3 inch diameter x 10 feet long.
  • Hose is flexible, features a non-kink design, and directs air from the front ducts to the spindle ducts.
  • Made from a black 3 inch double-ply neoprene-coated woven fiberglass hose with a spring steel inner and external fiberglass supports.
  • Features a smooth inner wall for unrestricted air flow.
Check Stock

Lisle 81850 Combination Brake Lining Gauge Set,9

  • The 9 Piece Manual Brake Gauge Set Allows Brake Pad Wear to be Accurately and Consistently Measured without Guessing..
  • Designed to check both straight on or at a 90° angle to the rotor with offset tips so the gauges can be used without removing the wheel or caliper assembly on many applications..
  • Brake lining gauges identify thickness levels for brake lining inspection..
  • The gauges are color coded to match SAE or Metric recommendations for brake pad replacement..
Check Stock

hygger 25ft Semi-Automatic Aquarium Water Changer, Fish Tank Gravel Cleaner, with Flow Control Valve

  • 【Quickly Change Water 】just use a long flexible hose and 2 flow valves, you can change the aquarium water more quicker and easier, no need electric, it's semi-automatic water changer suitable for medium and large fish tanks. No spill, no mess and no heavy lifting for changing dirty water and adding clean water.
  • 【Aquarium Gravel Cleaning 】When you use this water changer to suck away aquarium dirty water, you can move the gravel tube to cleaning the gravel or install the duckbilled on to clean fish feces. With the pressure from the water, the gravels and sands can be sucked up to the gravel tube then to vacuum out the debris in gravel.
  • 【Non-electric & Quiet】this aquarium water changer is not electric, no noise no disturb to your fish or plants. All you need to do is to control the 2 valves and open the faucet. With 2 orange built-in control valves on the water changer, to turn it on or off you just need to rotate the valve by 1/4 turn up or down. To add clean water in to aquarium, please remember to keep the water flow assembly valve closed, so when you open the faucet the water will flow into the hose.
  • 【3 sizes available】choose the size according to the distance from your fish tank to the sink faucet, flexible water hose length available:....
Check Stock

BILITOOLS 3L Vacuum Brake Bleeder Kit One Person Pneumatic Brake Fluid & Clutch Bleeding Extractor Tool with Adapters & 1L Refilling Bottle

  • A lightweight, easy to carry pneumatic brake, clutch and engine oil change tool with automatic cut off, can be used by one person..
  • Compare with other similar product, our larger capacity Pneumatic Brake Bleeder can automatically and continuously provide more suction to allow more quick bleeding of brake and clutch lines..
  • Quick, clean and efficient operation without specialized brake reservoir caps. Draws fluid from the bleed screw, enabling either bleeding or full replacement of fluid in system..
  • Includes 1L brake fluid refill bottle, 3L pneumatic brake bleeder tank with 63 inches flexible hose and universal bleeder screw adapter. Designed to drain most standard and ABS brake systems..
  • Inlet air pressure:4.8-11.6 bar (70 -170psi). Avg.air cons 4.5 CFM. Come with 16 pieces bleed screw adapters for a variety of bleed screw..
Check Stock

hygger Upgrade Aquarium Water Changer Kit, Semi-Automatic Fish Tank Gravel Cleaner, with 25 FT Water Hose, Flow Control Valve

  • 【Quickly Change Water 】just use a long flexible hose and 2 flow valves, you can change the aquarium water more quicker and easier, no need electric, it's semi-automatic water changer suitable for medium and large fish tanks. No spill, no mess and no heavy lifting for changing dirty water and adding clean water.
  • 【Aquarium Gravel Cleaning 】When you use this water changer to suck away aquarium dirty water, you can move the gravel tube to cleaning the gravel or install the duckbilled on to clean fish feces. With the pressure from the water, the gravels and sands can be sucked up to the gravel tube then to vacuum out the debris in gravel.
  • 【Non-electric & Quiet】this aquarium water changer is not electric, no noise no disturb to your fish or plants. All you need to do is to control the 2 valves and open the faucet. With 2 orange built-in control valves on the water changer, to turn it on or off you just need to rotate the valve by 1/4 turn up or down. To add clean water in to aquarium, please remember to keep the water flow assembly valve closed, so when you open the faucet the water will flow into the hose.
  • 【3 sizes available】choose the size according to the distance from your fish tank to the sink faucet, flexible water hose length available:....
Check Stock

Mityvac 7300 PneumatiVac Air-Operated Fluid Evacuator

  • Features a 2.3 gallon (8.8 liter) capacity air operated fluid evacuator for large jobs.
  • Automatic shut-off valve prevents overfilling.
  • Can be used to extract a wide-range of fluid types from transmission fluid, coolant, brake fluid, gear to engine oil.
  • Reservoir is constructed of durable polyethylene and will not rust or corrode.
  • Kit comes with 5 feet of flexible hose, dipstick tubes and a universal brake-bleeding adapter.
Check Stock

MWMNUN 2400mm AN3 M10 Motorcycle Hydraulic Brake Line Oil Hose Pipe Fitting Stainless Steel Braided Compatible with ATV Motorcycle Motocross Pit Dirt Street Racing bike-2400mm blue

  • Size:Diameter is Φ10mm, Two side banjo bend is 28°to 90°.
  • Material： parts is steel with anti-rus coating. Hose Parts - Inner Layer is Nylon flexible hose, Middel Layer is stainless steel wire braided, Outside Layer is clear color PVC protection..
  • Fit FOR: Can be used for transfer pressure for all car's & motors UTV. ATV etc.hydraulic brake system AN3 1/8" ..
  • Package included:1 x Hydraulic Brake Line Oil Hose Pipe Fitting,6 cable ties..
  • NOTICE - Please check the description and compatibility chart to verify the fitment before your purchasing.
Check Stock

JEGS Universal Brake Line Kit | Made In USA | Includes 25 Of 3/16 Steel Line PTFE-Lined Stainless Brake Hoses Weld Tabs Clips Female Tees Tube Adapters Fittings And Tube Nuts

  • CONTAINS the parts needed to install new brake lines with braided stainless brake hose on most vehicles.
  • INCLUDES: (1) 25' coil of 3/16" steel brake line, (4) -03AN x 18" PTFE lined stainless steel brake hoses, (4) Brake line weld tabs, (4) Brake line clips, (2) 3/8"-24 inverted flare female tees, (4) -03AN to 3/8"-24 inverted flare female tube adapters, (2) 1/8" NPT to 3/8"-24 inverted flare female fittings, (2) 9/16"-18 Tube Nuts, (2) 1/2"-20 Tube Nuts, (2) 7/16"-24 Tube Nuts, & (20) 3/8"-24 Tube Nuts.
  • INSTRUCTIONS show suggested line routing for traditional rear axles or independent rear suspension.
  • NOTE: ITEMS YOU MAY NEED THAT ARE NOT INCLUDED: caliper and wheel cylinder adapters, brake light switch, tee, and pigtail, residual pressure valves, and tools.
  • MADE IN USA with high quality components and assembly.
Check Stock