Best Brake Fluid Antifreeze
Antifreeze Refractometer in Fahrenheit, 4-in-1 Anti-Freeze Coolant Refractometer Tester for Checking Freezing Point of Automobile Antifreeze System, Battery Fluid, Glycol, Coolant, Antifreeze Tester
- 4-in-1 Tester - Measuring Freezing of automoblie antifreeze based on ethylene glycol or propylene glycol -60℉ to 32℉. Measuring Specific Gravity of battery acid 1.10 to 1.40Kg/L. Measuring of Windshield Washer Fluid based on ethanol or isopropyl alcohol -40℉ to 32℉. Measuring Urea Concentration in automobile diesel exhauset fluid (DEF) 30% to 35%.
- Display In Fahrenheit - Updated antifreeze coolant refractometer in Fahrenheit (℉) display, allow you easy to read measured results by ℉ unit, no need to units conversion and save your time.
- ATC Function - Coolant refractometer Fahrenheit can automatically compensate temperature when ambient temperature changes, eliminate the deviation, you can get the accurate results fast and easier.
- Easy To Use - Only need 2 or 3 drops of solution and wait for few seconds, then you get the accurate results. These antifreeze tester needs less sample solution than tradistional hydrometer and less expensive then digital refractometer.
- Durable And Portable - Antifreeze coolant tester is made of aluminum and ABS rubber, non-staining, anti-rust and stury for long perfermance. Comes with durable plastic box, portable and easy to take with you.
Check StockZKTOOL New Upgraded Version Brake Fluid Tester Pen, Test DOT3 DOT4 DOT5.1 ENV6 ENV4 Brake fluids,Brake Fluid Moisture Analyzer with 5 LED Indicators,Brake Fluid Liquid Tester Pen
- Function: The new pen type brake fluid moisture tester can widely test the percentage of moisture in DOT3 DOT4 DOT5.1 ENV6 ENV4 brake fluid.
- the results appear within a few seconds, fast and simple. Compared with similar products, it has a faster, more accurate reading capability and a wider range. Tap the top to turn on, and the green light is inserted into the water to use, simple and fast..
- LED lights: 5 LED lights indicate the percentage of water in the brake fluid in three colors of green, yellow, and red. From low to high, they are green (0%), green-yellow (4%). Easily grasp the percentage of water in the brake fluid, and consider whether to replace the brake fluid..
- Convenience: The brake fluid tester tool is simple and convenient. It only takes a few seconds to check the quality of car brake fluid. It is easy to operate for many new car owners. At the same time, it is a must-have vehicle tool because of its small size and easy portability. And it will automatically shut down if you don't use it within 12 seconds, saving your battery. (Requires 1 x AAA/1.5V battery, not included).
- Quality: The new Brake Fluid Liquid Tester Pen is a perfect tool that we updated after many studies of similar products on the market. It reads more accurately dur....
Check StockLisle 38780 22' Square No-Splatter Pad
- 22” Square Pad Protects Floors & Work Area from Messy Oil Splatter..
- Insert 22" square pad in transmission drain funnels or larger oil drain pans, before oil change to eliminate oil splatter..
- Porous material allows fluid to quickly pass through into funnel or pan..
- Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents..
- Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents.Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents..
- Important: Not for coolants or fluids that will be recycled in the vehicle. Material fibers may contaminate the fluid..
Check StockVXSCAN Brake Fluid Tester, Brake Fluid Liquid Testing Pen for DOT3 DOT4 Vehicle, Automotive Brake Fluid Moisture Tester with 5 LED Indicators
- ✔ Useful Brake Fluid Tester: Check the health status of your car brake fluid quickly, and remind you to change the brake fluid in time to make you more comfortable to drive..
- ✔ Extensive Application: Support most of the vehicle with DOT3 DOT4 car brake fluid. This brake fluid tester is developed for both professional and amateur, widely applied in individual, repair factories and dealer workshops..
- ✔ Simple Design: 5 LED indicators show the percentage of water in the brake fluid. The brake fluid tester pen is compact and portable, with a non-slip material and nickel-plated metal probe..
- ✔ Easy Operation: Install the LR03 AAA 1.5V battery(included), press the button at the top, dip the probe into the brake fluid, and the test result will be indicated by LEDs in a few seconds. The brake fluid tester pen will automatically power off after about 15 seconds of inactivity..
- ✔ NOTE: If the green LED no longer lights up after pressing the button, replace the battery. After each use, clean the test probe with tap water..
Check StockBrake Fluid Tester Pen with 5 LED Indicators Auto Brake Diagnostic Testing Tool for DOT3 DOT4 Brake Fluid
- 【What does it do?】 If the moisture content of the car's brake fluid is too high, it will cause the car's brakes to fail, so it is very necessary to have a brake fluid tester. You can check your brake fluid at any time..
- 【Application range】This brake fluid test pen supports most vehicles with DOT3 DOT4 car brake fluid, and can be used by professionals and individuals.(If you turn on the switch and all the lights are on, please remove the battery and restart).
- 【Easy to use】This brake fluid test pen has 5 LED indicators to show the water content in the brake fluid. Press the top button and immerse the probe in the brake fluid. After a few seconds, the LED will display the test result. The brake fluid test pen will automatically turn off after approximately 15 seconds of inactivity. (Without battery).
- 【Reminder】The probe of this brake fluid tester pen is made of high-precision metal material, and the test is accurate. If you need to repeatedly measure, you need to wipe the probe clean before measuring. After you have finished using it, please clean the body and probe of the test pen. This will extend the life of the test pen..
- 【Friendly service】 Our products are shipped from the US warehouse. If the product you received has any quality pr....
Check StockAutomotive Brake Fluid Detector - Universal Car Brake Fluid Tester with High-Precision Probe for Auto DOT3 DOT4 DOT5.1 Hydraulic Fluid/Liquid/Oil Moisture Analyzer
- 【You Must Have】Brake pressure was transmited by brake fluid, the pressure transmit will out of function once brake fluid include too water. In order to safe-driving, we must test water ratio scale in brake fluid regularly. The brake fluid tester help us do current maintenance, make sure we drive in safety condition..
- 【Scope of Application】Automotive Brake Fluid Detector is common fit for most vehicle. Check the health status of DOT-3, DOT-4, DOT-5.1 brake fluid and also most synthetic brake fluids. It's extremly convenient for personal use and broadly applied in individual workshops, repair factories and dealer workshops..
- 【Brake Fluid Tester】When the brake oil moisture content is detected, the LED indicator will lights up. The brake fluid tester will emit a “beep”alarm when the water content exceeds 3% of the red light. The alarm is loud and stereoscopic, allowing you to easily measure even in noisy environments..
- 【Special Design】High resolution LCD display with backlit provides an intuitive interface for easy reading data even in the dark. The fuselage has good texture, one button and one function, easy to operate. Buzzing alarm system, test result is clear absolutely..
- 【Ideal Tool】The automotive brake fluid tester has 250mm goo....
Check StockKHTD Brake Fluid Tester Pen, Auto Brake Diagnostic Testing Tool with 5 LED Lights, Compatible with DOT3 DOT4 DOT5.1 Brake Fluid
- CONVENIENT TOOL: This brake fluid tester pen shape design is a very small and convenient tool to test the moisture of your auto brake fluid. Simply press the button at the top, dip the probe the Testing the water content of your brake fluid dot 3, dot 4 and more will only take few seconds..
- MULTIPLE TESTING TYPE: The dot 3 brake fluid tester can also be uses for testing the fluids of DOT4, DOT5.1, ENV6 & ENV4. With this one automotive brake fluid tester, you can finish different jobs..
- EASY TO READ: With the percentage readings next to the LED lights on the brake fluid tester pen, you can simply read the result of water content in your brake fluid. When multiple LED lights are on, the maximum readings shall be the result of the brake fluid testing..
- PREMIUM QUALITY: This pen brake fluid tester is made of premium nylon raw material more durable to use. (1 AAA battery needed for use, not included in the Pack).
- QUICK RESPONSE: we are committed to offer good products as well as good services. Feel free to contact us if you have any problems.
Check StockCastrol SRF Racing Brake Fluid - 1 Liter 12512
- Avoid fluid contact with brake lining or painted surfaces.
- Follow vehicle manufacturer's recommendations when adding brake fluid.
- store brake fluid only in its original container.
Check StockGenuine Honda Fluid 08798-9008 DOT 3 Brake Fluid - 12 oz.
- Avoid fluid contact with brake lining or painted surfaces.
- Follow vehicle manufacturer's recommendations when adding brake fluid.
- store brake fluid only in its original container.
Check StockMercedes GENUINE 1L Brake Fluid DOT 4 PLUS Ultra Low Viscosity MB Spec 331.0 NEW
- One 32 fl oz can of STP 18668 Heavy Duty DOT 3 Brake Fluid.
- Works in all brake systems using DOT 3 brake fluid.
- Optimizes performance of disc and drum brake systems for easy car care.
- Brake fluid protects against brake failure from vapor lock.
- Automotive oil helps to prevent corrosion in the brake system.
- Use when needed, following the manual's instructions for a brake fluid flush.
Check StockPhoenix Systems (3001-B) Brake Fluid Test Strips, 100 Test Strips Per Tube, BrakeStrip, FASCAR, Copper
- Helps increase the number of needed brake fluid exchange services you perform by providing proof for the needed service..
- Gives you and your team of service advisors confidence to offer a needed brake fluid exchange..
- Identifies potential brake flulid related problems before they occur -thereby ensuring your customers safety..
- Simply remove a test strip from the tube, dip it into brake fluid and 60 seconds later you will know the condition of the brake fluid. (scientific proof).
- The test follows MAP guidelines and DOT test standards to determine when to change brake flujid. Great for DOT 3, 4 and 5.1 brake fluid (most vehicles use DOT 3 or 4).
Check StockSATA 1 3/8\(35mm) Dead Blow Hammer, 14 oz.(400g) Head Weight and 10 1/4\(260mm) Length, with a Soft Green Impact-Absorbing Rubber Head - ST92901SC
- [Dead blow] steel ball bearings in the head of this hammer create a deadening effect that reduces the rebound from the striking surface.
- [Soft face] a soft striking face is non-marring on delicate surfaces and doesn’t produce parks, making it perfect for sensitive work.
- [Polyurethane hammer] polyurethane head is resistant to many solvents, including gas, brake fluid and antifreeze.
- [Textured handle] industrial-strength nb rubber hammer absorbs impact and provides a comfortable, nonslip grip.
- [Fire prevention] ideal for professional environments where Fire prevention is a priority or concern.
Check StockSATA 1 3/4\(45mm) Dead Blow Hammer,18 oz.(520g) Head Weight and 11 1/4\(286mm) Length, with a Soft Green Impact-Absorbing Rubber Head - ST92902SC
- [Dead blow] steel ball bearings in the head of this hammer create a deadening effect that reduces the rebound from the striking surface.
- [Soft face] a soft striking face is non-marring on delicate surfaces and doesn’t produce sparks, making it perfect for sensitive work.
- [Polyurethane hammer] polyurethane head is resistant to many solvents, including gas, brake fluid and antifreeze.
- [Textured handle] industrial-strength nb rubber hammer absorbs impact and provides a comfortable, nonslip grip.
- [Fire prevention] ideal for professional environments where Fire prevention is a priority or concern.
Check Stock