Categories

Best Brake Flush Tool

OEMTOOLS 24441 Manual ATF Refill System, 8 Adapter Transmission Fluid Pump, Manual Fluid Transfer Pump Automotive, ATF Pump w/Shut-Off Valve

  • MANUAL TRANSMISSION FILL PUMP: The manual transmission fluid transfer pump allows the operator to fill or top off transmissions with up to 3 liters (3.1 quarts) of fluid between refills.
  • Multiple adapters to fit all of your transmission’s needs.
  • PRESSURIZED FILLER SYSTEM: Pressurized operation frees users from continual pumping.
  • Transmission flushing system works at a maximum pressure of 20 PSI.
  • The gauge registers a maximum pressure of 30 PSI.
  • Release excess pressure with the release valve.
  • FITS MANY VEHICLES: This transmission fluid pump automotive tool includes adapters for use with many Ford, BMW, Honda, Nissan, VW, Porsche, Mini Cooper, Audi, and Mercedes-Benz transmissions.
  • Included adapters cover the most common transmission systems.
  • CONVENIENT FEATURES: ATF transmission fluid filler comes with a belt attachment for storing each ATF flush adapter on the oil dispenser tank.
  • Transmission fluid flush kit hose features a swivel connector and a fluid dispensing shut-off valve.
  • MULTI-PURPOSE TRANSMISSION FILL KIT: This transmission pump can be used for pressurized fills like engine coolant, motor oil, brake or power steering fluid.
  • Transmission fluid pump transfer system is a money saver for the DIY mechanic’s tool kit.
Check Stock

Mercedes GENUINE 1L Brake Fluid DOT 4 PLUS Ultra Low Viscosity MB Spec 331.0 NEW

  • One 32 fl oz can of STP 18668 Heavy Duty DOT 3 Brake Fluid.
  • Works in all brake systems using DOT 3 brake fluid.
  • Optimizes performance of disc and drum brake systems for easy car care.
  • Brake fluid protects against brake failure from vapor lock.
  • Automotive oil helps to prevent corrosion in the brake system.
  • Use when needed, following the manual's instructions for a brake fluid flush.
Check Stock

Air Powered Brake Piston Wind Back Tool Pneumatic Brake Caliper Compression Tool Brake Caliper Piston Compressor Rewind Tool Brake Pump Adjusting Tool for Auto Repair

  • Professional Design: Brake caliper compression tool features anti slip knurled handle, exhaust button, pressure plate with rubber sleeve, magnetic head and inlet interface. Made of high carbon steel for durability..
  • Simple Operation: Use the brake compressor on left or right hand thread brake system wheel cylinder piston brake calipers (wind back calipers and some push back single piston calipers) with the 1/4inch air hose adapter to simplify brake jobs..
  • Brake Caliper Piston Tool: Use the ratcheting brake caliper compressor tool to compress pistons quickly and easily into the calipers.
  • Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads..
  • Ratcheting Action: Brake piston compression tool provides 360 degree swing.
  • center located ratchet screw creates an even force when compressing the piston to ensure proper alignment and prevent damage to your brake assembly.
  • reverse movement by flipping the switch on the handle tool to retract the compression plate..
  • Easy Reset: Drain the fluids from calipers then remove the caliper and worn brake pads from your rotor assembly.
  • Retract brake caliper press plates to fit inside the caliper cavity.
  • Begin ratcheting slowly and steadily until the pisto....
Check Stock

Brake Adjustment Tool, Brake Booster Adjustment Tool, Brake Booster Push Rod Adjustment Tool for Adjustable Braking Distance of Brake Pedal, Suit for Most Brake Boosters with Adjustable Pins

  • Using Brake Booster Push Rod Adjustment Tool Turned Out to Be So Easy - Yoolon designed a brake booster adjustment tool that works for everyone, even if you don't have the expertise also can use power brake booster pushrod pin adjustment tool quickly and easily. The brake adjustment tool's designed with a magnetic inner core, which can be firmly adsorbed on the surface of the master cylinder and booster during use. Our brake adjustment tool can improve work efficiency and saves time.
  • Brake Adjustment Tool Rejects All Safety Hazards - We designed a new master cylinder push rod length gauge is measure the depth of the master cylinder piston bore in order to adjust the length of the booster push rod pin. And two ends of the booster push rod pin adjustment tool are designed with a magnetic inner core, which can be firmly adsorbed on the surface of the master cylinder and booster during use which making your measurement and maintenance process easier.
  • High Quality That Puts Everyone's Mind at Ease - Get master cylinder push rod length gauge that no more worries about quality. Our brake booster adjustment tool kit is made of high-quality aluminum alloys, an....
Check Stock

YSTOOL Pneumatic Brake Caliper Piston Wind Back Compression Spreading Tool 23PCS Kit Rewind Spreader Air Tool Set to Repair Brake Pad Change Brake Pump for Cars Trucks

  • Brake caliper tool set comes with a brake compression tool and 22 drive key disc adapters, making it a easy job to push the brake caliper piston back without others' help. YSTOOL pneumatic brake pad caliper tool fits for a variety of domestic and foreign vehicles with windback pistons and push back pistons, performing services on many brake repair jobs like brake pump regulating, brake pads replacement, etc..
  • YSTOOL brake tools are compatible with Ford, Alfa Romeo, Audi, BMW, Citroen, Fiat, Alfa Romeo, Honda, Range Rover, Jetta, Jaguar, Subaru, Mazda, Mercedes, Mitsubishi, Nissan, Renault, Saab, Iveco, Toyota, Volvo, VW, etc. Just choose one adapter, connect the brake piston caliper tool to shop air, press air trigger(til the end) and rotate swivel rod to rewind brake piston, then release pressure before tool removal by pressing air release button..
  • Compared with manual brake caliper spreading tool, pneumatic brake caliper tool is more laborsaving, convenient and environment-friendly. Only one tool is needed to satisfy for use with left and right hand threaded pistons by rotating the long swivel handle freely, no need to gather two sets of left and right hand thrust bolt assemblies and waste time to try which one is right. YSTOOL caliper piston re....
Check Stock

ABN Brake Drum Tool Kit 15-Piece Service Brake Kit with Spring Pliers Brake Spoons Pad Gauge Brake Spring Tool

  • PROFESSIONAL GRADE AUTOMOTIVE TOOLS: The ABN 15-piece Drum Brake Service Kit is designed to allow you to remove and replace worn and broken brake parts and to make it easier to reach other parts.
  • These rear brake tool sets are designed to be used on most foreign and domestic cars and trucks.
  • SERVICE YOUR VEHICLE BRAKES: Whether you are a seasoned mechanic or a home mechanic, this automotive tool set allows you to service your vehicle brakes by making it easy to replace springs, check your pads, and reach other parts of the drum brake system.
  • EASY TO USE: The spring installer, remover, and retainer tools help to adjust brake springs safely to get to deeper parts of your brake system while the various adjustment spoons help you adjust clearance between the drum brake and brake shoe.
  • The 8 brake lining thickness gauges help you to identify thickness levels to know when its time to change your pads.
  • BUILT TO LAST: Constructed of heavy-duty metal, these brake tools are designed for durability and longevity.
  • Each standard sized brake adjusting tool has a chrome finish to protect from rust and corrosion.
  • The spring puller tool, spring installation tool, and spring retainers have ergonomic handles for comfort when using.
Check Stock

CMTOOL Brake Spring Tool for Semi Trucks, 5081 S-Cam Air Brake Spring Tools Replace Brake Shoes, Heavy Duty Tractors and Semi Trailers Brake Spring Tool, Steel Construction Truck Air Brake Tools

  • 1.【Brake Spring Tool for Safely Replacing Brake Shoes】This s-cam air brake spring tool is a better alternative to a vise grip, pry bar or screwdriver, and is used to safely replace brake shoes on heavy-duty tractors, trailers and semi-trucks..
  • 2.【Time-Saving and Efficient Truck Air Brake Tools】There are some pliers similar to car brake spring calipers, but in most cases, you can't use them in close proximity to the brake chambers or suspension. The semi brake spring tool does not have this problem, and it will not take up too much space in your toolbox..
  • 3.【Wear-Resistant and Corrosion-Resistant Semi Brake Tool】The heavy-duty semi brake spring tool is made of high-quality hard steel material, which has excellent performance of anti-wear and corrosion resistance and is durable..
  • 4.【Easy-to-use Air Brake Spring Removal Tool】No additional tools such as vices and screwdrivers are needed. Just hook the fixed spring ring and press down on the shaft. The semi trailer brake tools only take a few seconds to easily remove and install the shoe spring..
  • 5.【S Cam Brake Tool with "V" Structure】The semi truck tools with a "V"-shaped structure at the end makes full use of the principle of leverage. The Lever action on the axle makes the job easier. L....
Check Stock

Acouto Brake Pad Thickness Tool Car Brake Pad Tester Vehicle Brake Pad Thickness Gauge Brake Pad Lining Measure Tool Automotive Measurement Brake Shoe Gauge

  • 6mm / 0.2in---- This brake pad thickness tool is designed for brake pads (IV, V category) with 6mm / 0.2in thick base plate. This car brake pad tester is suitable for internal and external brake pads, with 1.5mm marking and calibration check.
  • Professional Design---- The slender design allows the tool to position the back of the lining plate, so that the probe can measure the distance between the bottom of the lining plate and the brake disc.
  • Practical Tool---- This brake pad thickness gauge is an ingenious tool that saves time, which is essential to any vehicle. Measure the brake pads of the vehicle without removing the wheels.
  • Easy to Use---- The brake pad lining measure tool is easy to operate and use, align the brake pads and press to measure, which is very convenient and highly practical.
  • Customer Said---- I do not use anything else when I inspect brakes on the vehicle. The tool is so simple to use and to read that anyone can do it the first time. Is that it removes the backing plate measurement of the brake pad and give you the real measurement of the pad only.
Check Stock

Acymner 24PCS Disc Brake Caliper Tool Kit | Heavy Duty Disc Brake Piston Caliper Compressor Rewind Tool Set for Brake Pad Replacement Reset, Fits Most American European Japanese Autos (Blue)

  • Durable Material: This disc brake caliper tool set is made of 45# carbon steel with rust-proof blasted finish, all components of our brake caliper compression tool are designed for repeated use with high quality materials. Hand thrust bolt has magnetic design to prevent disc adapters from falling off..
  • Easy Operation: The brake caliper tool also includes 2 hand thrust bolt assemblies(right & left). For brake pad and shoe replacement and rotating pistons back into the caliper on your car, truck or 4 wheel drive disc brake vehicles..
  • A Complete Caliper Compression Tool: This brake tool kit includes right and left handed thrust bolts, 2 retaining plates, 18 disc adapters,1 pair of gloves and a convenient carry case for secure storage, meet most of your adaptation needs..
  • Universal Compatibility: The heavy duty brake caliper tool kit includes 18 adapters fitting most of vehicles makes and models including American, European, and Japanese..
  • Storage Case: The brake caliper compression tool is packed in a heavy-duty case with precision-sized compartments for every piece - great for st....
Check Stock

OMT 2-in-1 Brake Tool Kit Drum Brake Tool Kit and Brake Caliper Compression Tool Drum Brake Tool for Drum Brake Repair and Adjustment Brake Caliper Wind Back Tool for Brake Pad Replacement Reset

  • DUAL BRAKE TOOL SET: This 30-piece brake kit from Orion Motor Tech includes all the necessary parts for adjustment, removal, and installation of dual brake vehicles. The 8 drum brake tools include a remover, installer, compressor, retainer, pliers, and standard, angled, and mini adjustment spoons. The 22 disc brake tools include 2 retaining plates, left and right thrust bolt assemblies, and 18 adapters..
  • NEAR UNIVERSAL COMPATIBILITY: this drum brake tool kit and caliper wind back tool kit covers hundreds of makes and models of cars and light trucks, whether import or domestic..
  • EASY OPERATION: Both the drum brake tool and disc brake caliper tool set offer reinforced ergonomic handles to save you time and spare you effort and aggravation during use. Everything is clearly labeled in the custom blow-molded carrying cases and included instructions..
  • PREMIUM MATERIAL: Each part is made of structural-grade steel for good ductility combined with outstanding strength, durability, and longevity. Black oxide and chrome coatings ensure superior long-lasting wear and corrosion resistance..
  • SATISFACTION GUARANTEED: Orion Motor Tech backs these brake drum tool kit and brake caliper wind back tool with our usual strong warranty and friendly 24/7 customer service, ensur....
Check Stock

Automatic Slack Adjuster Tools Set for Big Trucks and Trailers, Include 5/16'' Slack Adjuster Tool, Brake Adjuster Release Tool, Easy for Brake Adjust, More Accurate Brake Adjustment, Safe Driving

  • 【Product Composition】Our Automatic Slack Adjuster Release Tool Wrench Kit comes equipped with a fork-end release design tool and a double-square ratcheting wrench for efficient brake adjustment..
  • 【Convenient Function】Our Slack Adjuster Tool is compatible with many styles of heavy or medium-duty brake systems, making brake adjustment faster and easier..
  • 【Product Details】Our brake adjustment tool is made of durable carbon steel and features thermoplastic rubber (TPR) handles for effective anti-skid, improved comfort, and stability during brake adjustment.The inclined head design allows for easy release of the anti-reverse mechanism without prying, reducing hand fatigue during use..
  • 【Warm Tips】The gear of our brake adjuster tool is exposed at the top and sides, which may accumulate grease or dust during use. We recommend cleaning and oiling the brake adjuster tool, especially the gear, after use to extend slack adjuster wrench’s lifespan..
  • 【After-sales Guarantee】We are committed to providing our customers with excellent service 24 hours a day. Our Automatic Slack....
Check Stock

ABN Brake Tool Sets w/ 18 Pc Disc Brake Caliper Tool Kit & 8 Pc Drum Brake Tool Kit – Removal and Installation Tools

  • PROFESSIONAL AUTOMOTIVE TOOLS: The ABN 18-piece Brake Caliper Set and 8-piece Drum Brake Kit is designed to allow you to remove and replace worn and broken brake parts such as bearings, seals, axles, shoes, pistons, springs, pads, calipers, and rotors.
  • Rear brake caliper tools are designed to be used on most foreign and domestic cars and trucks.
  • BRAKE CALIPER WIND BACK TOOL SET: Each piece of the 18-piece brake caliper compressor tool set is constructed of heavy-duty metal for durability and longevity.
  • This set includes a left-handed and right-handed thrust bolt and 15 disc adaptors that are compatible with a wide range of vehicles.
  • All parts in this brake piston compressor tool set are designed to prevent damaging pistons and seals.
  • DRUM BRAKE TOOLS: This 8-piece professional grade brake set includes 3 varying sizes of brake spoons to easily adjust most brake drums and 5 varying brake spring tools to service these drum brakes.
  • Constructed of heavy-duty metal and ergonomic plastic handles, the brake piston compression tool set provides you with the perfect grip and durability for your project.
  • EASY STORAGE: Heavy-duty 14 x 3 x 12.3-inch (35.5 x 7.6 x 31.2 cm) plastic blow-molded carrying case with latches and handle protects these brake kits for easy tr....
Check Stock

OEMTOOLS 25252 Automatic Slack Adjuster Release Tool and Wrench, Slack Adjuster Tools for Big Truck, Trailer Brake Adjustment Tool, Hand Tools for Mechanics

  • SLACK ADJUSTER TOOLS: Our slack adjuster tool set is designed to aid in the installation and servicing of Meritor-brand air braking systems on heavy-duty trucks, long-haul trucks, and trailers.
  • Brake adjustment tool simplifies brake service.
  • CONVENIENT FEATURES: The slack adjuster wrench tool comes with a 5/16 inch double-square head and a built-in offset ratcheting mechanism that provides extra clearance for hands and knuckles.
  • Ratcheting brake tool speeds up installation and service.
  • EASY TO USE: This Meritor slack adjuster features a side-mounted forward and reverse lever, allowing for quick direction changes without removing the brake adjuster tool from the slack adjuster.
  • Convenient hand tools for any mechanic tool set.
  • HANDS-FREE OPERATION: The fork-end slack tool fits securely under the pull pawl for hands-free operation to release the tension button.
  • Truck slack adjuster fork-end tool retains tensioner release button securely without prying or causing damage.
  • COMFORTABLE TRUCK BRAKE TOOLS: Our double-square offset reversible truck tool wrench comes with an EZ grip handle fo....
Check Stock