Categories

Best Brake Hard Line

V Brakes for Bikes Linear Bicycle Brake Set LITEONE Mountain Bike Front and Rear V Brakes Set Replacement Parts fit for Most MTB BMX Road Bike 1 Pair

  • Size: The bicycle V brakes Arch size:110mm (4.3inches), Brake Pads Size:55mm(2.1inches). Suitable for most V-type brakes bike.
  • Material: This V Brakes strong and durable enough for using long time. The brake arm is made of aluminum alloy, solid and not easy to break. The brake pad is made of hard-wearing rubber, resistance to cold, heat and oxidation, not easy to deform. This Bicycle Brakes can provide great braking power on bike rim in both dry and wet conditions.
  • Install: 1. Screw the fixing hole of the brake corresponding to the body fixing hole.
  • 2. Pass the brake wire through the brake wire tube in sequence, and fix the position of the metal wire tube.
  • 3. Fix the brake line on the bolt, then install the brake leather, adjust the distance, position and length of the brake line, and then fix the brake line firmly.
  • Stop smoothly with less noise: the grooves of the brake pads can effectively prevent sand or stone damage the wheel rims.
  • The slightly curved design can provide better braking power and reduce stopping distance smoothly with lees noise.
  • Wide applications: This universal V-brakes compatible with both front rear wheels of MTB BMX mountain bike road bike folding bike hybrid bike. Note: you need to confirm whether the front and rear wheel of your....
Check Stock

Hapleby 4PCS Premium Bike Brake Pads, Professional Mountain and Road Bicycle V-Brake Pads, Bike Brake Blocks Kit, for Free Hex Wrench.

  • 【HARD-WEARING MATERIAL】 The brake pads are made of hyathetic fiber and nitrile rubber, they have supreme durable and long-lasting than ordinary rubber. brake is a safety issue related to life, please do not use poor quality brake pads..
  • 【EXPERIMENTAL DATA】 After many experiments we have obtained data, when the vehicle speed is 12.5km/h, it can be used continuously for more than 8000 times, while the ordinary brake pad is only 3,000 times. It can be replaced by 4,000 miles in smooth kilometers and 1,000 miles in steep hill..
  • 【HUMANIZE DESIGN】 This brake pads have three while lines. the first line is remind to replace the brake pads, the second line is braking effect will weaken, the third line is must replace brake pads. in order to be responsible for your life, please pay attention..
  • 【ACCORD AERODYNAMICS】 The arc and drainage design can prevent damages from sand, mud and stone to the wheel rims, the braking performance of high quality compound rubber is softer, smoother and quicker, and it will have excellent braking effect even in rainy and snow days..
  • 【BROAD COMPATIBILITY】 These brake pads are suitable for bike that above 20inchs and all v-brake systems, such as SRMA/SHIMANO/TEKTRO. now you don't have to go to a bicycle shop, a....
Check Stock

Tobefore Bike Brakes Set, Mountain Bike V Brake Set for Most Bikes V Brake Calipers, V-Brake Replacement Set for MTB, Road Bike,BMX,E Bike(2PCS Bicycle Brake Pad and 1PCS Bike V Brake Set) (Silver)

  • 【High Quality Materials】The brake arm is made of aluminum alloy, which is solid and not easy to break. The brake pad is made of hard wearing rubber, which is heat resistant and not easy to deform, providing great braking power on bike rim in both dry and wet conditions. The brake cable is also made of quality aluminum alloy and covered with black PU leather pipe, which makes the cable more strong and durable..
  • 【Stop Smoothly with Less Noise】The grooves of the brake pads can effectively prevent sand or stone damage the wheel rims. The slightly curved design can provide better braking power, and reduce stopping distance smoothly with less noise..
  • 【Easy to install】1. Screw the fixing hole of the brake corresponding to the body fixing hole. 2. Pass the brake wire through the brake wire tube in sequence, and fix the position of the metal wire tube. 3. Fix the brake line on the bolt, then install the brake leather, adjust the distance, position and length of the brake line, and then fix the brake line firmly..
  • 【Proper Size】The bike brakes' arch is approx 110 mm( 4.3 inches), brake pad is 55 mm( 2.1 inches)..
  • 【Practical Functions】This universal V brakes compatible with both front rear wheels of MTB BMX mountain bike road bike folding bike hy....
Check Stock

Bike Brake Cable Housing Kit Includes 1 Set Bicycle Brake Line 2 Pieces V Bike Brake Noodle Cable Guide Pipe and 2 Pieces Plastic Hoses for Road Mountain Bicycle Cycling Black Brake Line

  • What you receive: comes with 1 piece bicycle brake line set (includes 1 piece 5 mm brake line 2.5 m, 1 piece general front brake internal line 1.1 m, 1 x general rear brake internal line 1.7 m, 6 x brake line cap, 2 pieces thread tube S buckles, 2 pieces inside tail cap, 1 piece inside O ring, 5 pieces C-clip ) and 2 pieces V bicycle brake noodles cable set (includes 2 pieces V bike brake noodle cable guide pipe and 2 pieces plastic hoses).
  • Bicycle brake line set: strong cable for more braking power and smooth operation, long length and various head to fit mountain bike, road bike.
  • V Bicycle brake noodles cable set: included 2 pieces aluminium alloy V bike brake noodle cable guide pipe and 2 plastic hoses hose, made of rubber tube with a plastic pipe, reduce friction brake line, effectively protect the brake line, reduce brake line resistance, they are suitable for V bicycle brake repairing.
  • Durable and sturdy: this bicycle riding set is made of quality material, each replacement part has been well made, reliable and durable, can be applied for a long time.
  • Wide application: this bicycle brake cable housing kit is suitable for both mountain bikes and road bikes, contains everything you need to replace your existing ....
Check Stock

OEMTOOLS 25440 Professional Tube Bending Pliers Bends Brass Copper Steel and Aluminum Brake Lines of Diameters 5/16 3/8 3/16 and 1/4 Steel

  • BRAKE LINE BENDER: This tube bender is ideal for working on brake lines.
  • Brake line bending tool is designed to bend brass, copper, steel, and aluminum brake lines.
  • Tubing benders can make left, right, and offset bends up to 90-degree angles.
  • DUAL-SIZED ADAPTERS: The brake tube bender comes with two dual-sized adapters for different sizes of brake line diameters.
  • Pipe bender tool works on 1/4 inch, 5/16 inch, 3/16 inch, and 3/8 inch diameters of mild steel and soft tube material.
  • MINIMIZES DAMAGE: Our brake line tube bender features forged separators with knife edges to minimize damage to parts.
  • Safe soft copper tubing bender and metal tubing bender for any brake line kit.
  • Excellent tubing pliers for mild steel pipes and tubes.
  • HEAVY DUTY MATERIAL: These tubing bender pliers are made of alloy steel for additional strength and durability, ensuring these brake line forming pliers last for years to come.
  • Sturdy manual tubing bender makes the job much easier.
  • BRAKE LINE PLIERS PRODUCT SPECIFICATIONS: Size: 10.5 Inches.
  • Two Dual-sized Adapters for 5/16, 3/8, 3/16, and 1/4 Inch Brake Line Diameters.
  • Left, Right, and Offset Bends Up to 90-degree Angles.
Check Stock

Seaboard Air Line Passenger Service: The Streamlined Era

  • Standard Saej844 Air Suspension Horn Train Lowrider Air Brake Tubing 1/4 Air Tube Air Suspension Line 1/4 Pneumatic Tubing.
  • Working Pressure 1mpa.150 Psi Burst Pressure 3 Mpa 435 Psi Working Temperature -40 ℃ ~ +60 ℃ Air Brake Tubing 1/4" Air Hose Nylon Brake Air Line Kit Nylon Brake Line 1/4 Dot Airline Tubing 1/4 Air Brake Line Pnumatic Hose.
  • Pa 12 Nylon Hose. Usage:air Brake System,air Or Fluid Transfer Use With Air Brake Hose 1/4 Dot Tubing.
  • Size:1/4".pipe Thickness 1mm Bending Radius 40mm Air Horn Tubing 1/4 In Air Line.
  • Weight 190gr/10meter.material Polyamide Air Bag Hose 1/4 Air Hose.
Check Stock

Abu Garcia C3 Catfish Special Baitcast Round Reel

  • 3 stainless steel ball bearings plus 1 roller bearing(6500 size).
  • 2 stainless steel ball bearings plus 1 roller bearing (7000 size).
  • Carbon Matrix drag system provides smooth, consistent drag pressure across the entire drag range.
  • Extended bent handle with power knob gives anglers additional torque and power for hard pulling fish..
  • 6 pin centrifugal brake gives consistent brake pressure throughout the cast.
  • Synchronized level wind system improves line lay and castability.
Check Stock

OEMTOOLS 22064 6 Piece Flex Head Flare Nut Wrench Set, Metric Flare Tool, 9mm x 11mm, 10mm x 12mm, 13mm x 14mm, 15mm x 17mm, 16mm x 18mm, 19mm x 21mm

  • OPEN END RATCHETING WRENCH SET: Flexible crow foot allows for wide range of use across multiple jobs, whether you’re working on a brake line or plumbing.
  • BRAKE LINE WRENCH: Most durable brake line wrench set on the market.
  • Constructed of a durable steel with a hard-chrome finish.
  • Able to advance the flare nut without removing the wrench.
  • STORAGE & ORGANIZATION: Included EVA tray allows for a simple, clean, and efficient put-away process.
  • Keep your flare nut wrenches organized and close at hand for your next job.
  • FULL SPECIFICATIONS: Includes: 9 mm x 11 mm, 10 mm x 12 mm, 13 mm x 14 mm, 15 mm x 17 mm, 16 mm x 18 mm, 19 mm x 21 mm.
  • EVA Tray for Easy Storage and Organization.
Check Stock

ASD 3/16 and 1/4 Brakeline fittings kit nuts unions compression fittings 70 Pieces

  • Auto Supplies Direct (70) Piece 3/16″ & 1/4″ Brake Line Fittings Kit (3/16″ and 1/4″ Tube Nuts, Unions, and Compression Fittings) for Cars and Trucks.
  • Contains a (30) Piece 3/16″ Inverted Flare Brake Line Fittings Assortment, which Includes: (10) 3/16″ Short Tube Nuts, (10) 3/16″ Long Tube Nuts, and (10) 3/16″ Unions.
  • Contains a (30) Piece 1/4″ Inverted Flare Brake Line Fittings Assortment, which Includes: (10) 1/4″ Short Tube Nuts, (10) 1/4″ Long Tube Nuts, and (10) 1/4″ Unions.
  • Contains (5) 3/16″ OD Compression Brake Line Fittings.
  • Contains (5) 1/4″ OD Compression Brake Line Fittings.
Check Stock

JooFn Bike V Brake Noodle Cable Guide Pipe Rubber Boots Bicycle Cycling 10 Sets (30Pcs)

  • Included 10 Boots and 10 Noodles(5pcs is 90° bend, another 5pcs is 110° bend), and 10pcs brake cable caps..
  • Tube with a plastic catheter, reduce friction brake line, effectively protect the brake line, reduce brake line resistance..
Check Stock

Tektro 984 Black Rear Caliper-Lever-Cable BMX Bicycle Brake Kit

  • You will get: 2 pairs mountain bike brakes with the brake pads fit for most bicycle, road bike, etc..
  • 2 Pieces barrel ended brake cables (2 m in length), 2 pieces cable end caps and 6 pieces end ferrules.
  • Product dimensions: the bike brakes in arch size is 110 mm (4.3 inches), brake pad is 55 mm (2.1 inches), barrel ended brake cables are 2 m in length.
  • Durable material: this bike brakes set is made of alloy and plastic, strong and durable enough for using long time, meet your needs.
  • How to install: 1. crew the fixing hole of the brake corresponding to the body fixing hole.
  • 2. Pass the brake wire through the brake wire tube in sequence, and fix the position of the metal wire tube.
  • 3. Fix the brake line on the bolt, then install the brake leather, adjust the distance, position and length of the brake line, and then fix the brake line firmly.
  • Wide applications: this bike brakes set fits for most bicycles, road bikes, MTB, BMX.
  • Warm note: you need to confirm whether the rear wheel of your car has the mounting hole of this type of brake, please be careful to purchase.
Check Stock

CNC Mountain Bike V Brake Set, Bicycle V Brake for Front/Rear

  • You will get: 2 pairs mountain bike brakes with the brake pads fit for most bicycle, road bike, etc..
  • 2 Pieces barrel ended brake cables (2 m in length), 2 pieces cable end caps and 6 pieces end ferrules.
  • Product dimensions: the bike brakes in arch size is 110 mm (4.3 inches), brake pad is 55 mm (2.1 inches), barrel ended brake cables are 2 m in length.
  • Durable material: this bike brakes set is made of alloy and plastic, strong and durable enough for using long time, meet your needs.
  • How to install: 1. screw the fixing hole of the brake corresponding to the body fixing hole.
  • 2. Pass the brake wire through the brake wire tube in sequence, and fix the position of the metal wire tube.
  • 3. Fix the brake line on the bolt, then install the brake leather, adjust the distance, position and length of the brake line, and then fix the brake line firmly.
  • Wide applications: this bike brakes set fits for most bicycles, road bikes, MTB, BMX.
  • Warm note: you need to confirm whether the rear wheel of your car has the mounting hole of this type of brake, please be careful to purchase.
Check Stock

4LIFETIMELINES Brake Line Kit – Professional Grade Galvanized Steel Tube 3/16 Brake Line – 25Ft Brake Line Tubing Coil with 16 Fittings

  • FITTINGS INCLUDED: The 4LIFETIMELINES brake line kit was designed for professional use and comes with 16 fittings: Steel Tube Nut 3/16 (3/8-24 I) x 10, Fitting 3/16 (7/16-24) x 2, Steel Tube Nut 3/16 (9/16-18 I) x 2, Fitting 3/16 (1/2-20) x 2..
  • PREMIUM QUALITY & DURABLE: This brake line tubing coil is made with professional grade double-wall galvanized steel tube and zinc coated corrosion-proofing technology, guaranteed to withstand the test of time..
  • ENHANCED FLEXIBILITY: Unlike similar products on the market, this 3/16” brake line meets all SAE and ISO specifications, being highly flexible and allowing for easy bending and shaping without kinking..
  • COMPATIBILITY: The 4LTL professional grade brake line meets SAE J527 international and US standards and requirements, being compatible to use in hydraulic braking systems..
  • EXTRA FEATURES & DIMENSIONS: This brake line tubing coil measures 25ft in length, for a convenient routing and installation. With 0.028” wall thickness, 3/16” OD and universal size, this brake line is a smart and economic replacement!.
Check Stock