Categories

Best Brake Hose Bracket

Tektro HD-e350 eBike Hydraulic Disc Brake with 2Pcs 160/180mm Rotor

  • 【Electric Induction Control System】With power cut-off sensor, when braking, the signal is sent to the electronic control system to power off the motor. Cable length 190mm. Please pay attention to check whether the segment of the wiring port matches..
  • right rear 1850mm. This hydraulic disc brake is only suitable for ebikes. 【Oil】Non-corrosive environmentally friendly mineral oil..
  • 【Caliper】 Forged aluminum body. Open system, 2 piston. Weight Front: 302g / Rear: 322g. 【Brake Lever】:Cast aluminum lever & bracket. Two-pieces clamp. 3 finger blade..
  • 【Rotor】Diameter 180mm. Thickness 1.8mm. Weight 150g each. Lightweight polygonal guide design. High heat dissipation and heat resistance. 【Pads】High-performance metal-ceramic composites, low noise resin pad..
  • Note: the rear calipers and lever came in separate pieces so you can route internally. The brake hose were already filled with brake fluid, so you need to be careful not to spill the brake fluid when you install it..
Check Stock

Seaboard Air Line Passenger Service: The Streamlined Era

  • Standard Saej844 Air Suspension Horn Train Lowrider Air Brake Tubing 1/4 Air Tube Air Suspension Line 1/4 Pneumatic Tubing.
  • Working Pressure 1mpa.150 Psi Burst Pressure 3 Mpa 435 Psi Working Temperature -40 ℃ ~ +60 ℃ Air Brake Tubing 1/4" Air Hose Nylon Brake Air Line Kit Nylon Brake Line 1/4 Dot Airline Tubing 1/4 Air Brake Line Pnumatic Hose.
  • Pa 12 Nylon Hose. Usage:air Brake System,air Or Fluid Transfer Use With Air Brake Hose 1/4 Dot Tubing.
  • Size:1/4".pipe Thickness 1mm Bending Radius 40mm Air Horn Tubing 1/4 In Air Line.
  • Weight 190gr/10meter.material Polyamide Air Bag Hose 1/4 Air Hose.
Check Stock

NEW WILWOOD GO KART BRAKE SET WITH CALIPER PADS MASTER CYLINDER & LINE KIT FOR 1/8 ROTORS GREAT FOR KARTING JR DRAGSTER ETC SOUTHWEST SPEED

  • ... 1/2" Bore 1/2" Bore Weighs only .55 lbs. This super lightweight aluminum master cylinder designed specifically for kart & jr. dragster racing applications incorporates an adjustable lever ratio with a remote mount clear fluid reservoir for easy monitoring The assembly comes ready to install and includes billet bracket, lock-wired drilled hardware, & fluid line fitting ..
  • 5 Feet of -3 Nylon Brake Line 3/16" Nylon tubing 5' Should equip most karts with some left-over..
  • 90 Degree Fitting for Caliper Depending on how everything is mounted, the line might run to the caliper at a bad angle for the straight fitting. This 90 degree fitting installs in place of the straight fitting in the caliper to allow smoother, neater plumbing with less chance of kinking 90 Degree compression hose end 1/8" NPT Female to -3 Nylon hose..
Check Stock

GARDENA 8055 - 100 Foot Wall Mounted Retractable Reel with Hose Guide, Automatic retraction for easy watering

  • Convenient watering: Give the Italian made, 100 foot, high quality garden hose a short pull after use and it safely retracts itself, while the integrated hose guide prevents twisting or tangling.
  • Flexible use: The Retractable Hose Reel can be swiveled 180 degrees due to its practical wall bracket, preventing kinks while watering and can be positioned close to the wall when not in use.
  • Bonus hose guide and bracket template: Attach the hose guide to sharp corners or a flat surface using the provided hardware to prevent any hose damage, the bracket template allows easy installation.
  • Safe storage: Using a standard padlock (not included) you can lock the reel to the wall bracket to protect from theft, and in frost-prone areas, the reel can easily be removed and stored indoors.
  • Items delivered: 1x GARDENA Retractable Hose Reel with bonus guide, GARDENA premium hose, 5 ft connecting hose and connection fittings, Adjustable Spray Nozzle and easy install bracket with template.
Check Stock

GARDENA Retractable Hose Reel 82-Feet With Convenient Hose Guide

  • With a short pull on the hose, the lock releases and the hose is drawn into the box-no bending over or cranking.
  • An integrated steel spring provides even, powerful retraction.
  • The integrated hose guide prevents twisting and tangling of the hose.
  • Includes a Hose Guide bracket to mount on wall or corner mount.
  • Nozzles, sprayers and wash brushes can be stored on the wall bracket, ready for use.
  • In winter, the Hose Box can be taken by the ergonomically-shaped handle and effortlessly removed from the wall bracket for frost-protected storage.
  • Hose diameter single 13 mm. Wall bracket, screws, wall plugs are all included.
Check Stock

48V1500W Electric MTB Bicycle E Bike Hub Motor Conversion kit MTX Rim theebikemotor (26", Rear Wheel + TFT Display)

  • ...Deal, remember it is SHIMANO, please measure your brake hose routing length first for right choice.Whatever for 26" 27.5" 29"er, the completed front & rear set is ready to be installed out of the box. We aim to offer this pair for Front 180mm, Rear 160mm rotors (buy separately in our store), so 4 bracket(adatper) included (addon value >$15) in the package, to satisfy any IS or PM mount from the old bikes.
  • - Gift Options, it's in our brand package, almost all brakes originally come with a bike need to be replaced. You may find it a gift option to your husband, wife, boyfriend, girlfriend, or gift for your kids' bike for back to school gift, Christmas gift, Valentine's day gift, Mother's day or Father's day gift, thanksGiving gift or New year gifts.
  • - Ourstanding Performance, Brakes = Safety, assembled as Left for Front,reach adjustable, including B01S resin pads, alway measure your existing brake hose length for appropriate size. People still using cable mechanical disc brakes,time to upgrade with this affortable Hydraulic Brake, the difference is night vs. day, a customer avoided a 25mph accident with our brakes.
Check Stock

SHIMANO Deore SM-BH90 Cuttable Hose - Black Front

  • Premium replacement resin coated hydraulic brake hose.
  • Stiff reinforced hose that performs under pressure, keeping your brakes sharp.
  • 2.1 mm bore diameter for excellent brake performance and response.
Check Stock

Raybestos BH380406 Professional Grade Hydraulic Brake Hose

  • Raybestos Brake Hose is designed to transfer the brake fluid from the master cylinder to the slave cylinder for braking.
  • This hose meets federal standards to ensure performance and safety, while providing longer hose life.
  • It utilizes premium fittings to ensure a good hydraulic seal.
  • Designed to transfer the brake fluid from the master cylinder to the slave cylinder for braking.
Check Stock

Raybestos BH381116 Professional Grade Hydraulic Brake Hose

  • Raybestos Brake Hose is designed to transfer the brake fluid from the master cylinder to the slave cylinder for braking.
  • This hose meets federal standards to ensure performance and safety, while providing longer hose life.
  • It utilizes premium fittings to ensure a good hydraulic seal.
  • Designed to transfer the brake fluid from the master cylinder to the slave cylinder for braking.
Check Stock

Elite BMX Bicycle 18', 20' & 26' Model Freestyle Bike - 3 Piece Crank (Oil Slick, 20')

  • ...). The 20″ is suitable for 11+ year old (4ft to 5ft 10″). The 26″ ( 4ft 2″ to 5ft 10″ /16+ in age).
  • 18″ Specs: FRAME: Hi-tensile steel (” Toptube). FORK: Cr-Mo. HEADSET: 1 1/8″ Integrated sealed. STEM: Alloy (50mm reach). BARS: 4 Piece Cr-MO (8.75″ Rise). CRANKS: 3-Piece Cr-Mo Crank x 170mm. BOTTOM BRACKET: Sealed 48T Spline. PEDALS: Hi-Density Plastic Platform. SPROCKET: 25T. DRIVER: 9TBRAKE LEVER: Tektro Alloy. BRAKES: Tektro Alloy U-brake. TIRES: 18×2.4″.
  • 20″ Specs: FRAME: Hi-tensile steel (20.5″ Toptube). FORK: Cr-Mo. HEADSET: 1 1/8″ Integrated sealed. STEM: Alloy (50mm reach). BARS: 4 Piece Cr-MO (8.75″ Rise). CRANKS: 3-Piece Cr-Mo Crank x 170mm. BOTTOM BRACKET: Sealed 48T Spline. PEDALS: Hi-Density Plastic Platform. SPROCKET: 25T. DRIVER: 9T. BRAKE LEVER: Tektro Alloy. BRAKES: Tektro Alloy U-brake. WEIGHT: 26.2 lbs. TIRES: 20×2.4″.
  • 26″ Outlaw Specs: FRAME: Hi-Ten / Cr-Mo. FORK: Cr-Mo. HEADSET: 1 1/8″ Integrated sealed. STEM: Alloy (50mm reach). BARS: 2 Piece Cr-MO (8.75″ Rise). CRANKS: 3-Piece Cr-Mo Crank x 170mm. BOTTOM BRACKET: Sealed 48T Spline. PEDALS: Hi-Density Plastic Platform. SPROCKET: 25T. DRIVER: 9T. BRAKE LEVER: Tektro Alloy. BRAKES: Tektro Alloy U-brake. TIRES: 26×2.4″.
Check Stock

REDUCTUS 5/8" x 85 ft Retractable Garden Hose Reel, Wall Mount Retractable Water Hose with 10 Pattern Hose Nozzle, Any Length Lock/180° Swivel Automatic Hose Reels for Outside Garden Watering

  • Convenient watering: Give the 100 foot, high quality garden hose a short pull after use and it safely retracts itself, while the integrated hose guide prevents twisting or tangling.
  • Flexible use: The Retractable Hose Reel can be swiveled 180 degrees due to its practical wall bracket, preventing kinks while watering and can be positioned close to the wall when not in use.
  • Bonus hose guide and bracket template: Attach the hose guide to sharp corners or a flat surface using the provided hardware to prevent any hose damage, the bracket template allows easy installation.
  • Safe storage: Using a standard padlock (not included) you can lock the reel to the wall bracket to protect from theft, and in frost-prone areas, the reel can easily be removed and stored indoors.
  • Items delivered: 1x GARDENA Retractable Hose Reel with bonus guide, GARDENA premium hose, 5 ft connecting hose and connection fittings, Adjustable Spray Nozzle and easy install bracket with template.
Check Stock

Dialed: The secret math of a perfect mountain bike setup

  • [Great Valve Package] In this package, you will get 4pcs brake lever covers and 4pcs compression nuts, 6pcs protective sleeves, 4pcs oliver and 4pcs inserts, 1 roll 2500mm bicycle hydraulic disc brake hose, 1pc bicycle hydraulic hose fitting insert tool and 1pc hydraulic hose cutter, total 25pcs. Complete kit can fully meet your needs, which is ideal for Shimano BH59 System, you don’t need to find and buy other accessories, saving your time and money..
  • [Reliable Material] Brake hose is made of high-quality material and nylon coating, which is durable and stable. 2500mm length pipes can be cut according to your needs. Precision made with fine workmanship, high temperature and low temperature resistance, high blasting coefficient and enough safe. Needle driver insertion tool is made of aluminum alloy CNC process, it feels good and durable..
  • [Hose Fitting Insert Tool] It is easy to use, super utility needle driver insertion tool. Attached hydraulic hose cutter, sharp and achieve precise and smooth cutting, clean and no burrs. Quick change adapter design, it can match with all needle driver olive and barb on the market, making maintenance easier..
  • [How to Use] You can install hose fitting cleanly and gently. First, put the olive into the oil pipe, seco....
Check Stock

Sunsong 2203199 Brake Hydraulic Hose

  • Each brake hose is precision engineered to exact fit and includes brackets, grommets, molded plastic guards, wire clips, and protective sleeves as required for to ensure that all wearable parts are restored to original condition.
  • Brake hoses exceed DOT, Federal Vehicle Safety Standards (FMVSS 106) and SAE J1401 standards with a burst pressure rating of 8,700 psi, and a tensile strength of 560 lb. Durability test (Whip test) results exceed original equipment requirements by 300%.
  • All tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime.
  • Every brake hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new hose.
  • Brake hoses with banjo end fittings include new copper washers to ensure proper sealing.
Check Stock