Best Brake Hose Crimper

Seaboard Air Line Passenger Service: The Streamlined Era

  • Standard Saej844 Air Suspension Horn Train Lowrider Air Brake Tubing 1/4 Air Tube Air Suspension Line 1/4 Pneumatic Tubing.
  • Working Pressure 1mpa.150 Psi Burst Pressure 3 Mpa 435 Psi Working Temperature -40 ℃ ~ +60 ℃ Air Brake Tubing 1/4" Air Hose Nylon Brake Air Line Kit Nylon Brake Line 1/4 Dot Airline Tubing 1/4 Air Brake Line Pnumatic Hose.
  • Pa 12 Nylon Hose. Usage:air Brake System,air Or Fluid Transfer Use With Air Brake Hose 1/4 Dot Tubing.
  • Size:1/4".pipe Thickness 1mm Bending Radius 40mm Air Horn Tubing 1/4 In Air Line.
  • Weight 190gr/10meter.material Polyamide Air Bag Hose 1/4 Air Hose.
Check Stock

Hydraulic Hose Crimper 71500 Manual A/C Hose Crimper Kit Air Conditioning Repaire Handheld Hydraulic Hose Crimping Tool (SK8056)

  • This A/C hose crimper set is made of aluminum alloy material to ensure durability. The stamper hardness can reached 53 HRC, which can make the crimping effect better..
  • It has complete dies for the most common sized hoses and fiitings, covering hose sizes #6, #8, #10, #12 and reduced barrier #8, #10 and #12. The dies can be snapped quickly into the press fixture requiring no pins or screws..
  • Applicable for bead locking fitting. The crimping tool has a base that can be mounted to a bench for easy use,or the base can be held by any vise.
  • The A/C hose crimper set is an one-person operation, saving your time and energy. It is light-weight and compact, suitable for narrow space. The pressure of hydraulic repair tool can not exceed 40MPa, it only use for aluminum material..
  • 7*24 hours online service. If you encounter any questions during the shopping process, you are welcome to contact us at any time..
Check Stock

Victor 0384-2101 Journeyman Edge 2.0 540/510, 90° Plus Outfit

  • Includes 2 barbed hose splicers and 4 hose ferrules.
  • Common USA torch inlet and regulator outlet connections.
  • Low pressure, less than 200 psig gas service.
  • Repair your 1/4-Inch hose in the field, (ferrule crimper not included).
Check Stock

Leberna 115 Pcs 304 Stainless Steel Stepless Single Ear 7-29mm Hose Clamps with Pincers Crimper Tool Kit | Securing Pipe Hoses Automotive | Cinch Rings Pinch Clamp, Crimp Clamp Assortment PEX Crimping

  • ...rrosion-Resistant】TUV approved, high precision single ear stepless hose clamps are made of 304 stainless steel. These clamps are anti-rust and corrosion resistant, a good choice for long-term use. Hose clamps are used to seal various types of hoses. Included pincer is used to increase clamp force. The jaws of the crimper are made of chrome vanadium steel, which is durable and will not collapse or deform. It is the perfect design for repairing pipes & plumbing systems..
  • 【Cochlear Design】Cochlear design ensures continuous clamping during temperature changes, machine variations, or dimensional changes. The pipe is always in good sealing and fastening status..
  • 【Polished Smooth Edge】The edge of all clamps are polished smooth, and they will not damage the hose. 360 ° Stepless Design, no inner protrusion/gap and Narrow band design provide a more centralized seal pressure..
  • 【COMPLETE SPECIFICATIONS】This single ear hose clamp set comes with 10 common sizes: 6-7 mm, 7-8.7 mm, 8.8-10.5 mm, 10.3-12.8 mm, 12.8-15.3 mm, 15.3-18.5 mm, 17.8-21.0 mm, 20.3-23.5 mm, 22.4-25.6 mm, 25-28.6 mm. They are widely used in hoses and plastic pipes, especially suitable for plumbing, beverage, automotive, marine, motorcycle, and industrial applications. One Ear Clamp ....
Check Stock

SHIMANO Deore SM-BH90 Cuttable Hose - Black Front

  • Premium replacement resin coated hydraulic brake hose.
  • Stiff reinforced hose that performs under pressure, keeping your brakes sharp.
  • 2.1 mm bore diameter for excellent brake performance and response.
Check Stock

Raybestos BH380406 Professional Grade Hydraulic Brake Hose

  • Raybestos Brake Hose is designed to transfer the brake fluid from the master cylinder to the slave cylinder for braking.
  • This hose meets federal standards to ensure performance and safety, while providing longer hose life.
  • It utilizes premium fittings to ensure a good hydraulic seal.
  • Designed to transfer the brake fluid from the master cylinder to the slave cylinder for braking.
Check Stock

Raybestos BH381116 Professional Grade Hydraulic Brake Hose

  • Raybestos Brake Hose is designed to transfer the brake fluid from the master cylinder to the slave cylinder for braking.
  • This hose meets federal standards to ensure performance and safety, while providing longer hose life.
  • It utilizes premium fittings to ensure a good hydraulic seal.
  • Designed to transfer the brake fluid from the master cylinder to the slave cylinder for braking.
Check Stock

Dialed: The secret math of a perfect mountain bike setup

  • [Great Valve Package] In this package, you will get 4pcs brake lever covers and 4pcs compression nuts, 6pcs protective sleeves, 4pcs oliver and 4pcs inserts, 1 roll 2500mm bicycle hydraulic disc brake hose, 1pc bicycle hydraulic hose fitting insert tool and 1pc hydraulic hose cutter, total 25pcs. Complete kit can fully meet your needs, which is ideal for Shimano BH59 System, you don’t need to find and buy other accessories, saving your time and money..
  • [Reliable Material] Brake hose is made of high-quality material and nylon coating, which is durable and stable. 2500mm length pipes can be cut according to your needs. Precision made with fine workmanship, high temperature and low temperature resistance, high blasting coefficient and enough safe. Needle driver insertion tool is made of aluminum alloy CNC process, it feels good and durable..
  • [Hose Fitting Insert Tool] It is easy to use, super utility needle driver insertion tool. Attached hydraulic hose cutter, sharp and achieve precise and smooth cutting, clean and no burrs. Quick change adapter design, it can match with all needle driver olive and barb on the market, making maintenance easier..
  • [How to Use] You can install hose fitting cleanly and gently. First, put the olive into the oil pipe, seco....
Check Stock

Mophorn Hydraulic Hose Crimper Hydra-Krimp 71500,Manual AC Hose Crimper Kit Air Conditioning Repaire Handheld,Hydraulic Hose Crimping Tool with 7 Die Set for Barbed and Beaded Hose Fittings

  • Durable Crimping Tool: Our crimper is made of aluminum alloy material, ensuring its durability. Stamper hardness can reach up to 53 HRC to bear a....
  • Integral Hydraulic: This hand-held integral hydraulic press A/C hose crimper is made for easy use. The hydraulic tool is designed with exquisite....
  • Instant Setup: Our hydraulic crimper can be installed according to the following steps: First, select the correct die to insert, insert the pin, then....
  • Lightweight & Compact: One-person operation saves your time and energy. Besides, the crimping tool kit is stored in a plastic toolbox, reducing the....
  • Wide Application: The crimping tool has a base that can be mounted to a bench for easy use, or the base can be held by any vise. It is compatible with....
Check Stock

Sunsong 2203199 Brake Hydraulic Hose

  • Each brake hose is precision engineered to exact fit and includes brackets, grommets, molded plastic guards, wire clips, and protective sleeves as required for to ensure that all wearable parts are restored to original condition.
  • Brake hoses exceed DOT, Federal Vehicle Safety Standards (FMVSS 106) and SAE J1401 standards with a burst pressure rating of 8,700 psi, and a tensile strength of 560 lb. Durability test (Whip test) results exceed original equipment requirements by 300%.
  • All tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime.
  • Every brake hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new hose.
  • Brake hoses with banjo end fittings include new copper washers to ensure proper sealing.
Check Stock

SHIMANO Bicycle Disc Brake Assembled Set - BR-M8100-KIT Rear

  • Brakes are pre-bled, Includes metal pads and hose.
  • BL-M8100 features a stiffer brake lever design that provides added support for aggressive riding.
  • Servo Wave Action technology means quicker brake engagement with shorter free stroke.
  • The BR-M8100 2-piston brake caliper is optimized for cross country riding styles.
  • Brake Lever Use: Right // Hydraulic Hose Length: 1700.
Check Stock

12 Pieces Brake Line Clips Metal Brake Line Retainer U Shaped Brake Hose Bracket Parking Brake Cable Clip Replacement Hose Retaining Clip Brake Hose Lock for Cars Trucks Vehicles Parts

  • Package you will get: the package includes 12 pieces of metal brake line clips, well made and reliable, enough for you to replace your old or rusted one and apply to where you need.
  • Meanwhile, you can share them with family, close friends, neighbors.
  • Quality material: these car brake hose locks are made of quality steel, coming from exquisite workmanship, sturdy and serviceable, resistant to rust and corrosion, will not deform or break when installing, also not easy to fall off, which can serve you for a long time, you can rest assured to use.
  • Easy to operate: this hose lock retainer clip is easy and convenient to install, you only need to attach the brake hose to a bracket connected to the steel brake line, saving you time and effort nicely.
  • Extensive applications: these replacement hose clamps have a wide range of applications to use, suitable for cars, trucks, SUVs, motorcycles and hoses with the appropriate size.
  • And they are portable and lightweight, nice for your storage and carry.
  • Size information: the brake hose retaining clip measures approx. 28 x 27 mm/ 1.10 x 1.06 inches (length and width), and the middle section is about 13 mm/ 0.51 inch, please make sure it is the size you need before purchasing.
Check Stock

FOUR UNCLES 2L Vacuum Brake Bleeder Air Brake Bleeder Kit with 2L Brake Fluid Extractor and 1L Refilling Bottle

  • 【One Person Operation】This brake bleeder bleeds and flushes hydraulic brakes and clutches with a vacuum and is simple to use. Large capacity collection reservoir can contain 2 liters of fluid, also includes an automatic master cylinder refill kit with a 1 liter reservoir (safety cup), which makes changing brake oil easy and simple for one man operation..
  • 【2 Silicon Bleed Hoses】The brake oil bleeder kit includes a 40 inch silicone bleed hose with a universal rubber adapter that used with most standard and ABS brake systems, and a 40 inch master cylinder evacuation hose especially for bleeding brake in master cylinder..
  • 【Efficiently to Bleeding Work】It contains a variable thumb throttle which maintains average air flow rate 2 cfm and a desired brake fluid flow rate. And the fixing ring lock keeps extracting oil continuously, efficiently and quicker..
  • 【Quieter Work】 Built-in Integrated silencer allows the brake fluid to flow quietly through the silicone hose and makes a messy job cleaner, quicker and quieter..
  • 【Convenient & After Sales】Midget size of the N.W is less than 1 kg makes it easy and convenient to operate and carry even for women. And If there is some problem with our products while you receive it, pls feel free to contact us, ....
Check Stock