Categories

Best Brake Hose Line

Bike Brake Cable Housing Kit Includes 1 Set Bicycle Brake Line 2 Pieces V Bike Brake Noodle Cable Guide Pipe and 2 Pieces Plastic Hoses for Road Mountain Bicycle Cycling Black Brake Line

  • What you receive: comes with 1 piece bicycle brake line set (includes 1 piece 5 mm brake line 2.5 m, 1 piece general front brake internal line 1.1 m, 1 x general rear brake internal line 1.7 m, 6 x brake line cap, 2 pieces thread tube S buckles, 2 pieces inside tail cap, 1 piece inside O ring, 5 pieces C-clip ) and 2 pieces V bicycle brake noodles cable set (includes 2 pieces V bike brake noodle cable guide pipe and 2 pieces plastic hoses).
  • Bicycle brake line set: strong cable for more braking power and smooth operation, long length and various head to fit mountain bike, road bike.
  • V Bicycle brake noodles cable set: included 2 pieces aluminium alloy V bike brake noodle cable guide pipe and 2 plastic hoses hose, made of rubber tube with a plastic pipe, reduce friction brake line, effectively protect the brake line, reduce brake line resistance, they are suitable for V bicycle brake repairing.
  • Durable and sturdy: this bicycle riding set is made of quality material, each replacement part has been well made, reliable and durable, can be applied for a long time.
  • Wide application: this bicycle brake cable housing kit is suitable for both mountain bikes and road bikes, contains everything you need to replace your existing ....
Check Stock

NEW CURRIE 70-87 CHEVY C-10 GMC C-15 C1500 TRUCK 2WD 5-LUG REAR END WITH WILWOOD DISC BRAKES, 11\ DRILLED ROTORS, RED CALIPERS, LINES, PARKING BRAKES, AXLES BEARINGS C10 C15, 1982 1983 1984 1985 1986

  • New Currie Enterprises Rear End with 31 Spline Axles with Wilwood Disc Brake Kit including Drilled Rotors and Red Calipers, Parking Brake Cable Kit, and Brake Line Kit for the applications below (Part # GMC7087X5-K7) 003e Currie Crate Rear Ends are designed to be a bolt-in upgrade.
  • Fits: | Chevrolet Trucks: 003e Will Fit All Late-1970 to 1987 C-10 2wd Trucks with 5-Lug wheels | GMC Trucks: 003e Will Fit All Late-1970 to 1987 C15/C1500 2wd Trucks with 5-Lug wheels.
  • Includes: | Currie 9-Plus Centurian Notch-Back Rear End with 31 Spline Axles (Currie # CE-GMC7087X5) 003e 31 Spline performance axle package 003e Housing includes all 3rd member studs installed 003e GMT7087X5 GMC7072X5 GMC7387X5 003e Built to the stock overall width (63 5/8") and pinion offset specs 003e 63 5/8" is measured outside-of-axle-flange to outside-of-axle-flange, in other words, where the wheel bolts on to where the wheel bolts on.
  • Wilwood 11" Disc Brake Kit with Drilled Rotors and Red Calipers (Wilwood Part # 140-11389-DR): | Brake Kit includes: 003e Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors with Hats 003e Low-Profile 4 Piston Dynapro Calipers - Red 003e Drum Parking Brake Assemblies with Caliper Mounting Brackets 003e Bearing Retainers 003e BP-10 Smart Compound Br....
Check Stock

Koehler Enterprises KE001 Hose Clamp Emergency Kit, 6 Piece

  • [Package Contents]:The 10AN hose separator 5pcs with allen wrench 1pc,please ensure the sies of the hose separator clamp match the OD of your hose.
  • [Quality Material]:The hose separator is aluminum, it's different from other plastic products which will pollute the environment, and you also don't need to use plastic tape to fix your line.Metal Suits -10AN SS braided hose secure tight with hex allen head bolt.more easy for you to install them..
  • [ Compatibility and Reusable ]:Our guarantee that this product is not disposable, and you can easily reuse them. You can use them for Fit for 5/8 Fuel Line, Oil Line, Brake Line, Water Pipe and Gas Line and so on.
  • [Convenient and tidy]:The hose line separator clamps are used to improve the tightness between multiple pipes and make the hoses more organized and tidy, especially in cars or other small spaces.
  • [Tip]:Our hose separator clamp suit,usually used forwater Hose pipe Gas,Line,Fuel Line and other purposes,Please check the size and pictures carefully before buying,If you have any questions, Please contact us, We will be happy to provide you with the best service..
Check Stock

Mtsooning Motorcycle Brake Hydraulic Line, 60cm/23.6inch Braided Clutch Oil Pipe, Stainless Brake Hose Replacement for ATV Motorbike Pit Dirt Bike

  • Material: Braided stainless steel hose provides the durability and safety of the perfect motorcycle brake line, the banjo is made of steel with a rust-resistant coating..
  • Size:The diameter of the banjo is 10mm/0.39inch, and the banjo bends on both sides are 28°. The length of the brake hose is 60cm/23.6inch.
  • Features: PVC material wrapping and stainless steel braiding protection provide products with excellent aging resistance, corrosion resistance, high and low temperature resistance, and durable quality.
  • Application: This braided brake line motorcycle is suitable for most bicycle, enduro, motocross and other scenarios..
  • Precautions and after-sales service: Please confirm your line length before purchasing. If you have any quality problems after purchase, please contact us..
Check Stock

NEW WILWOOD GO KART BRAKE SET WITH CALIPER PADS MASTER CYLINDER & LINE KIT FOR 1/8 ROTORS GREAT FOR KARTING JR DRAGSTER ETC SOUTHWEST SPEED

  • Wilwood Karting Kit with Brake Caliper & Pads, Master Cylinder, 5' of Nylon Line, & 90 Degree Fitting to use with Caliper if necessary. (Wilwood Part #120-5498, #260-5520, #928-503, & #928-560)..
  • Wilwood Karting Kit with Brake Caliper & Pads, Master Cylinder, 5' of Nylon Line, & 90 Degree Fitting to use with Caliper if necessary. (Wilwood Part #120-5498, #260-5520, #928-503, & #928-560). Kit Includes: Wilwood Go-Kart Caliper for .125" Rotors Fits 0.125" Thick rotors Features Two 1.00" Pistons Weighs only 1.2 lbs. Comes with high friction brake pads..
  • Wilwood Go-Kart Master Cylinder with a 1/2" Bore 1/2" Bore Weighs only .55 lbs. This super lightweight aluminum master cylinder designed specifically for kart & jr. dragster racing applications incorporates an adjustable lever ratio with a remote mount clear fluid reservoir for easy monitoring The assembly comes ready to install and includes billet bracket, lock-wired drilled hardware, & fluid line fitting ..
  • 5 Feet of -3 Nylon Brake Line 3/16" Nylon tubing 5' Should equip most karts with some left-over..
  • 90 Degree Fitting for Caliper Depending on how everything is mounted, the line might run to the caliper at a bad angle for the straight fitting. This 90 degree fitting instal....
Check Stock

Fuel Line Clamp Set, Hose Pinch Pliers for Radiator, Brake, Coolant and Gas Line, Red (3 Sizes)

  • Hose Pinch Pliers: These flexible fuel line clamp pliers can lock into position leaving your hands free to repair.
  • Multi-Use: These gas line clamps are the ideal coolant, fuel, and brake line clamps tool for auto repairs at home or for professional mechanics.
  • Reliable Material: The fuel line pliers kit is made from durable, lightweight, non-conductive, and rust-resistant nylon.
  • Dimensions: The large pliers measure approximately 9.93 x 2.12 x 0.75 inches, the medium pliers measure 7.18 x 1.87 x 0.75 inches, the small pliers measure 6.12 x 1.62 x 0.62 inches.
  • Comes With: You will receive a total of 3 brake hose clamp pliers in 3 different sizes.
  • please note that these are not for use on rigid, reinforced, or high-pressure lines.
Check Stock

JEGS Universal Brake Line Kit | Made In USA | Includes 25 Of 3/16 Steel Line PTFE-Lined Stainless Brake Hoses Weld Tabs Clips Female Tees Tube Adapters Fittings And Tube Nuts

  • CONTAINS the parts needed to install new brake lines with braided stainless brake hose on most vehicles.
  • INCLUDES: (1) 25' coil of 3/16" steel brake line, (4) -03AN x 18" PTFE lined stainless steel brake hoses, (4) Brake line weld tabs, (4) Brake line clips, (2) 3/8"-24 inverted flare female tees, (4) -03AN to 3/8"-24 inverted flare female tube adapters, (2) 1/8" NPT to 3/8"-24 inverted flare female fittings, (2) 9/16"-18 Tube Nuts, (2) 1/2"-20 Tube Nuts, (2) 7/16"-24 Tube Nuts, & (20) 3/8"-24 Tube Nuts.
  • INSTRUCTIONS show suggested line routing for traditional rear axles or independent rear suspension.
  • NOTE: ITEMS YOU MAY NEED THAT ARE NOT INCLUDED: caliper and wheel cylinder adapters, brake light switch, tee, and pigtail, residual pressure valves, and tools.
  • MADE IN USA with high quality components and assembly.
Check Stock

ATPEAM Hose Clamp Pliers Pinch Off Pliers Set 3 PCS Plastic Fuel Line Clamp Pliers Set for Fuel Hoses, Gas Lines Brake Hoses, Radiator Hoses, Coolant Hoses (3pcs Straight)

  • ...s kit, you will get 3 sizes pinch off pliers to fit all types of hoses, including straight hose clamp pliers: 5.9"/155mm, 7.3"/185mm, 10"/255mm. This hose plier set can clamp hoses with diameters of 15mm, 20mm and 25mm, and with jaw openings of up to 20mm, 30mm, and 65mm respectively. Simply grip the brake line clamp plier on the hose and lock it with the safety buckle to free your hands, super easy and convenient without damaging the hose..
  • 【Wide Application】ATPEAM hose clamp pliers pinch off pliers set includes three sizes clamp plier tools to fit for many types of flexible tubes, is great for automotive flexible hoses, fuel hoses, gas lines brake hoses, radiator hoses, coolant hoses, lawnmower fuel gas lines, water soft pipe, heater hose, and more..
Check Stock

PRO BAT Braided Hydraulic Brake Hose Line Pipeline For Chinese GY6 Scooter ATV Dirt Bike Go Kart 10mm Banjo Ends (70''/175cm)

  • 70"/175mm Hydraulic Brake Oil Line ATV Quad Go Kart Scooter Cable Hose With 10mm Banjo Ends.
  • 70" long --from top to end ,10mm banjo nut fittings.
  • Made with high quality heavy duty braided stainless steel.
  • Hydraulic Brake Master Cylinder Hose Line Pipeline.
Check Stock

LIUYE 1000mm-1600mm 28 Degree M10 Hydraulic Brake Oil Hose Line Pipe for Motorcycle Pit Dirt Bike ATV Motocross Street Bikes Sport Bikes (Green 140cm)

  • High performance reinforced Hydraulic Brake Oil Hose Line Pipe.
  • Fit for Most Of Motorcycle Dirt Pit Bikes Motocross Street Bikes Sport Bikes Motors UTV,ATV etc.
  • The diameter of mounting hole is 10mm, two end banjo is 28 Degrees to 28.
  • Package includes: 1 x Brake Oil Hose Line.
  • In order not to cause trouble to you, please confirm the size you need before purchase.
Check Stock

CLAYTON MACHINE WORKS Firewall Mount Brake/Gas Pedal Assembly P/N TA-206-BKA1

  • Hose Clamps: These flexible pinch off pliers can lock into position leaving your hands free to repair.
  • please note that these are not for use on rigid, reinforced, or high pressure lines.
  • Multi-Use: These tools are ideal to use as coolant hose clamp pliers, fuel line clamps, brake line clamp, and even as fuel line clamp pliers.
  • Reliable Material: These hose pinch pliers kit are durable, light weight, non-conductive and rust-proof, easy to use.
  • Dimensions: The large pliers measure approximately 9.93 x 2.12 x 0.75 inches, the medium pliers measure 7.18 x 1.87 x 0.75 inches, the small pliers measure 6.12 x 1.62 x 0.62 inches.
  • What's Included: You will receive a total fo 3 hose pinch off pliers in 3 different sizes.
Check Stock

NICECNC Red Front Brake Line Cable Clamp Compatible with Honda XR650L 1993-2022 XR250R 1987-1996

  • ➊Retain the brake hose in correct place, ensure the safety and stability of the hose.
  • ➌Light weight, higher corrosion resistance and longer life than stock clamp.
  • ➍Get this eye-catching anodized parts for your bikes to fix the front brake line.
  • ➎ Easy to install, no installation instructions.
Check Stock

Fuel Line Kit 3/8\ 6AN 20FT Fuel Hose Nylon Stainless Braided CPE Oil Fuel Injection Line Fitting Kit Universal

  • ...traight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree) and 3/8 braided fuel line. All the an fittings feature a reusable spin-lock connector.
  • Universal Application: The AN6 nylon braided fuel hose can be worked with coolant, diesel, oil, hydraulic fluid, pump gas, air, and fuel. This braided fuel line mostly used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, transmission system and oil cooler kit, etc. Easily enough line here to run all the way from your fuel tank to the engine.
  • Excellent Flexibility and Durability: The Black Braided Steel Fuel Hose made of Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
  • The hose end AN fittings is made of high strength T6061 Aluminum, polished and anodized surface provide the bright appearance, corrosion protection and strong strength.
  • Safety Features: The 6an push lock hose working temperature range: -40℉ to 350℉ (-40℃ to 176℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Braided gas line Inner diameter: 0.34 inch, outside diameter: 0.56inch. Please measure before purchase.
  • No Worry To Buy: Excellently Sealed, no leaking. We offer 3-month after-sale service for the 6an 3/8 fuel hose fittings kit. Any problem you have, contac....
Check Stock