Categories

Best Brake Hub Puller

WINMAX TOOLS AUTOMOTIVE Axle & Front Wheel Hub Puller – Flange Type Tool 3-3/4 to 4-1/2 Inches Power Steering Pulley Remover Hub Grappler (Type Hexagon)

  • EASY BRAKE & BEARING REPAIR: The WINMAX Axle Remover & Front Wheel Puller Hub Grappler Tool makes for easy brake and bearing maintenance.
  • WORKS ON YOUR VEHICLE: Compatible fit on domestic and import vehicles with independent front wheel suspension.
  • Use on any vehicle with studs that are inside the drum and has a tapered axle and 4-6 lugs.
  • VARIOUS APPLICATIONS: Use this hub grappler on 4, 5, or 6 bolt stud design and all non-C lock GM axles.
  • BUILT TO LAST: Heated pressure screw holds up to tough use.
  • Drive center hole for the wheel studs and are constructed from heat-treated alloy steel that is drop forged for maximum strength and longevity that resists rust and corrosion.
  • PERFECT SIZE: Yoke and bolt PERFECT SIZE: Yoke and bolt are threaded 5/8-inch x 18 inches to best suit most vehicle applicationsare threaded 5/8-inch x 18 inches to best suit most vehicle applications.
Check Stock

CARTMAN 9-Way Internal/External Slide Hammer Puller Set - Pulls Hubs, Rear Wheel Axle Shafts, Bearings, Bushings, Seals, Retainers

  • Ideal for internal and external pulling on bearing cups, stubborn oil seals, Bushings, and many press fitted parts. Features: Internal and External Three Leg and Two Leg jaw puller yokes.
  • 5lb. Slide Hammer, 425mm long, M16*1.5mm UNF thread.
  • Front Hub puller, Rear Axle puller, Locknut Cone.
  • Dent puller screws (large and small), Supplied in blow mold storage case..
  • Features: Internal and External Three Leg and Two Leg jaw puller yokes..
Check Stock

JOMBULL 9-Way Slide Hammer Puller Set, 19 pcs Rear Wheel Axle Hub Dent Shaft Puller, Slide Hammer Bearing Puller for Hub Seal

  • 【Durable】 Our 9-way slide hammer puller set is made of heat-treated forged steel, polished and chrome-plated to resist rust and wear, extending the service life..
  • 【Application】 The axle hub dent shaft puller is widely used for flanged rear axles, most front wheel drive hubs, pulling dents and other press fit parts..
  • 【Easy to operate】 You only need to install the axle hub dent puller on the part you want to remove, when pulling the T-handle, transfer the force to the shaft, the shaft drives the connecting end to pull out the part, repeat the above steps, the hub or bearing will be easily removed..
  • 【What you get】 Our 9-way slide hammer puller set includes, slide hammer, puller head, pulling adapter, cross block, inner/outer pulling jaw, hex jaw nuts and screws (3pcs), Vise-Grip adapter (single lead thread), sealing hook, 3-way puller head, cone, self-tapping screw and retainer..
  • 【Safe storage】 The slide hammer bearing puller comes in a blow molded case, sturdy and durable, and each piece has precisely sized compartments, easy to store and carry..
Check Stock

Bonvoisin 15T Hydraulic Gear Puller Set Wheel Bearing Puller Kit 2 or 3 Jaws Pulling Separator for Wheel Hubs Rotors Car Axles Pulleys Brake Drums

  • [No Oil Leakage] - The hydraulic puller is forged with high-quality steel and cast in one piece. There is NO need for sealing rings and NO oil leakage. And the hydraulic cylinder is thickened with a strong pressure resistance..
  • [3 or 2 Jaws Interchange] - 3 jaws / 2 jaws can be easily interchanged can be easily interchanged, and can also be used Horizontally or vertically, without site restrictions. It is flexible to operate and easy to replace..
  • [Complete Accessories] - This 3 in 1 bearing puller set integrates pump, tubing, and drawing machine, which includes: 1 x hydraulic cylinder, 1 x handle, 3 x jaws, 6 x pulling tabs, 6 x screws, 1 x spring thimble, 1 x pull ring, 1x portable thickened plastic box..
  • [Wide Applications] - The bearing separator is widely used in various places. Such as truck hub, brake drums, sprockets, rotors, car axles, wheel bearing, shaft and pulley disassembly.
  • railway vehicle, factory machinery and mining equipment maintenance, etc..
  • [One-year Warranty] - Within one year of purchase, if something goes wrong with the hydraulic puller, you can replace it for free..
Check Stock

OEMTOOLS 25749 Wheel Hub Removal Tool, Green Hub Bearing Removal Tool, Hub Buster Tool Prevents Axle Removal or Damage, Works for 5, 6, and 8 Lug Hubs

  • Clean Break: Remove your damaged or frozen hub assembly without any risk of damaging the axle with this hub assembly removal tool.
  • Your Go-To Tool: The hub puller tool is designed to work with any configuration of axle-bolted hubs, including 5, 6, and 8 lug hubs.
  • If the Hub Fits: Hub removal is simplified with the 2-5/8” center-to-center hole pattern of this wheel hub puller, making installation easy and speeding up the hub removal process.
  • Shielded With Steel: Trust in your wheel hub remover’s longevity with its 3/4" steel backing plate and reinforced striking plate, giving it the strength to endure any wear and tear.
  • A Tool For the Ages: This wheel hub remover will resist rust and corrosion thanks to its high-quality steel construction, resulting in equipment you can rely on long-term.
Check Stock

OEMTOOLS 37342 Master Wheel Hub and Bearing Remover and Installer Kit Back and Front Wheel Bearing Puller Kit Back and Front Wheel Hub Puller Easy to Use

  • NO SHOP PRESS NEEDED: The OEMTOOLS 37342 Master Wheel Hub and Bearing Remover and Installer Kit saves time removing even seized-up wheel hub and....
  • FOR PROFESSIONAL AND DIY MECHANICS: This wheel bearing puller/installer is one of the only tools for servicing front and rear wheel hubs and bearing....
  • UNIVERSAL APPLICATION: This wheel bearing removal tool features all the adapters needed to service a number of foreign and domestic vehicles, remove....
  • SLIDE-HAMMER-FREE REMOVAL: This wheel bearing tool and hub press makes it simple to remove and install wheel hub and bearing assemblies as well as....
  • WHEEL HUB PULLER KIT INCLUDES: Hub removal tool, Front wheel bearing adapters, Pusher Washers, Receiver Sleeves, Nut-Bolt, and Heavy Duty Bearing.
Check Stock

ATPEAM 9-Way Slide Hammer Puller Set | Wrench Adapter Axle Bearing Hub Auto Set, Axle Front Rear Wheel Bearing Dent Hub Gear Puller Remover Set

  • Extra Durable: The ATPEAM slide hammer puller set is made of drop forged steel pullers and fully hardened shaft and accessories, this will pull the hardest wheel bearing and wheel hub out of the tight position, and make sure this tool set a longer lifespan..
  • A Complete Puller Set: 1x shank and T-bar assembly, 1x 4.8 lb. sliding hammer weight, 1x cross nut, 2x hub grappler adapter flanges, 1x large forcing screw, 1x cone, 1x 3-way puller head, 1x vise grip adapter with double lead thread, 1x seal hook adapter, 1x dent puller retainer, 1x self-tapping screw, 3x 5 inch (127 mm) internal and external jaw bars, 3x hex jaw nuts, 3x hex head cap screws, and 1x blow molded storage case..
  • Auto Body Repair Tool Set: The slide hammer bearing puller kits are body shop tools that are used to aggressively remove tightly jammed parts or dents.
  • slide hammers consist of a long metal shaft with an attachment point at one end, a heavyweight that slides along the shaft, and a handle with a stop on the opposite end.
  • this hammer tool slide kit includes 2 jaws and 3 jaw internal and external pullers, rear axle bearing puller tool, locking plier adaptor, puller hook, and auto dent puller tool.
  • Wide Application: The 9-way slide hammer puller set with 4.8 lb slide hammer is idea....
Check Stock

Sunluway 6575 Hub Grappler Kit for on Vehicle Wheel Hub and Bearing Removal & Installation

  • 【UNIVERSAL FITS】 6 new adapters increases application coverage up to 2009 model year. Also includes tie rod/ball joint tool and 2 Ford axle installers..
  • 【FUNCTION】This Hub Grappler Kit, replaces OTC 6575, which is the complete solution for servicing wheel hubs and bearings on the vehicle without removing the steering components or knuckle. It can eliminate unnecessary alignments or the use of a shop press, saving you time and energy!!.
  • 【PERFORMANCE】Jaws are designed and sized to properly fit hub applications and can be quickly located on the puller Bar without the use of fasteners.
  • 【EASY TO USE】 With 3/4" custom drive screw coupled with the special equalizer washer provides smooth operation. Easy to remove and install the front hub and bearing .Comes with Operation Manual..
  • 【A MUST HAVE】The Hub Grappler Puller is specifically designed to apply maximum force with minimal effort from an impact gun, which can minimize your serving time..
Check Stock

OTC 6575-2C Hub Tamer to Grappler Update Kit

  • This kit includes everything to update the previous Hub Tamer Kit to the Hub Grappler kit..
  • Includes the Hub Grappler Puller, 6 new adapters, misc. hardware and the Hub Grappler Application Guide..
Check Stock

DONSP1986 Bicycle Coaster Brake Hub/Bike Brake Rear Hub 36 Hole Stainless Steel

  • Bicycle Coaster Brake Hub/Bike Brake Rear Hub 36 Hole Stainless Steel.
  • Rear Hub diameter: 38mm, work with 1.5" adapter.
  • Package includes: 1 x Coaster Brake Hub. 1 x Accessory (18 tooth slices, screws and gasket, etc).
Check Stock

6575 Hub Grappler Kit Used on Vehicle Wheel Hub and Bearing Removal & Installation

  • 「FUNCTION」This Hub Grappler Kit, replaces OTC 6575, which is the complete solution for servicing wheel hubs and bearings on the vehicle without removing the steering components or knuckle. It can eliminate unnecessary alignments or the use of a shop press, saving you time and energy!!.
  • 「A MUST HAVE」The Hub Grappler Puller is specifically designed to apply maximum force with minimal effort from an impact gun, which can minimize your serving time.
  • 「EASY TO USE」 3/4" custom drive screw coupled with the special equalizer washer provides smooth operation..
  • 「NICE DESIGN」 Jaws are designed and sized to properly fit hub applications and can be quickly located on the puller Bar without the use of fasteners..
  • 「UNIVERSAL FITS」 6 new adapters increases application coverage up to 2009 model year. Also includes tie rod/ball joint tool and 2 Ford axle installers..
Check Stock

OEM TOOLS 27213 Master Wheel Hub & Bearing Remover & Installer Kit Back & Front Wheel Bearing Puller Kit Back & Front Wheel Hub Puller Easy to Use

  • NO SHOP PRESS NEEDED: Remove the need for a shop press with our wheel hub bearing press tool.
  • Save time removing even seized-up wheel hub and bearing....
  • FOR PRO AND DIY MECHANICS: This wheel bearing puller/installer is one of the only tools for servicing front and rear wheel hubs and bearing on German....
  • TIME-SAVING BEARING TOOL: No need to remove the strut assembly or knuckle to remove/install the hub and bearing.
  • VARIETY OF ADAPTERS: Service your vehicles easily with our rear and front wheel bearing removal kit.
  • This wheel bearing removal tool features all the....
  • DURABLE STEEL CONSTRUCTION: Our rear and front wheel drive bearing adapter kit's steel design holds up to the torque required to remove hubs and....
Check Stock

OTC Tools 6575-2 Hub Tamer to Grappler Update Kit

  • Includes everything to update the previous Hub Tamer Kit to the New Hub Grappler Kit.
  • Included is the Hub Grappler Puller, 6 new adapters, misc. hardware and the new Hub Grappler Application Guide.
Check Stock