Categories

Best Brake Line Connector

Line Lock Roll Control Brake Lock,Universal Launch&line lock kit for brakes Electric Solenoid Kit(Black)

  • ...a burn out by locking the front tires and releasing the back brakes with this system. Line locks are often used for burnouts by fully locking the front wheels and then engaging the gas pedal and disengaging the clutch pedal, this makes the rear tires spin but keeps the car stationary.
  • Each kit includes a inline fuse connector, indicator light, snap-action switch, 2pcs 1/8-27NPT brass adapter and 3pcs mounting screws. High quality stainless steel valve assembly gives it strong sturdiness.Works with 12 -24 volt electric systems.
  • Fully-enclosed epoxy-molded electrical coil makes it reliable.
  • The attractive aluminum fin shell enables it to cool down.
  • The wider lightweight base provides better mounting stability.
  • besides, it has extra threaded port for brake line pressure gauge..
  • ATTENTION: This line lock is to be installed in the front braking system (for rear wheel drive vehicles) for drag race staging or burnouts. Alternatively, in the rear braking system for front wheel drive vehicles. This solenoid will not impede normal braking when installed correctly..
Check Stock

OEMTOOLS 25440 Professional Tube Bending Pliers Bends Brass Copper Steel and Aluminum Brake Lines of Diameters 5/16 3/8 3/16 and 1/4 Steel

  • BRAKE LINE BENDER: This tube bender is ideal for working on brake lines.
  • Brake line bending tool is designed to bend brass, copper, steel, and aluminum brake lines.
  • Tubing benders can make left, right, and offset bends up to 90-degree angles.
  • DUAL-SIZED ADAPTERS: The brake tube bender comes with two dual-sized adapters for different sizes of brake line diameters.
  • Pipe bender tool works on 1/4 inch, 5/16 inch, 3/16 inch, and 3/8 inch diameters of mild steel and soft tube material.
  • MINIMIZES DAMAGE: Our brake line tube bender features forged separators with knife edges to minimize damage to parts.
  • Safe soft copper tubing bender and metal tubing bender for any brake line kit.
  • Excellent tubing pliers for mild steel pipes and tubes.
  • HEAVY DUTY MATERIAL: These tubing bender pliers are made of alloy steel for additional strength and durability, ensuring these brake line forming pliers last for years to come.
  • Sturdy manual tubing bender makes the job much easier.
  • BRAKE LINE PLIERS PRODUCT SPECIFICATIONS: Size: 10.5 Inches.
  • Two Dual-sized Adapters for 5/16, 3/8, 3/16, and 1/4 Inch Brake Line Diameters.
  • Left, Right, and Offset Bends Up to 90-degree Angles.
Check Stock

Seaboard Air Line Passenger Service: The Streamlined Era

  • Standard Saej844 Air Suspension Horn Train Lowrider Air Brake Tubing 1/4 Air Tube Air Suspension Line 1/4 Pneumatic Tubing.
  • Working Pressure 1mpa.150 Psi Burst Pressure 3 Mpa 435 Psi Working Temperature -40 ℃ ~ +60 ℃ Air Brake Tubing 1/4" Air Hose Nylon Brake Air Line Kit Nylon Brake Line 1/4 Dot Airline Tubing 1/4 Air Brake Line Pnumatic Hose.
  • Pa 12 Nylon Hose. Usage:air Brake System,air Or Fluid Transfer Use With Air Brake Hose 1/4 Dot Tubing.
  • Size:1/4".pipe Thickness 1mm Bending Radius 40mm Air Horn Tubing 1/4 In Air Line.
  • Weight 190gr/10meter.material Polyamide Air Bag Hose 1/4 Air Hose.
Check Stock

ASD 3/16 and 1/4 Brakeline fittings kit nuts unions compression fittings 70 Pieces

  • Auto Supplies Direct (70) Piece 3/16″ & 1/4″ Brake Line Fittings Kit (3/16″ and 1/4″ Tube Nuts, Unions, and Compression Fittings) for Cars and Trucks.
  • Contains a (30) Piece 3/16″ Inverted Flare Brake Line Fittings Assortment, which Includes: (10) 3/16″ Short Tube Nuts, (10) 3/16″ Long Tube Nuts, and (10) 3/16″ Unions.
  • Contains a (30) Piece 1/4″ Inverted Flare Brake Line Fittings Assortment, which Includes: (10) 1/4″ Short Tube Nuts, (10) 1/4″ Long Tube Nuts, and (10) 1/4″ Unions.
  • Contains (5) 3/16″ OD Compression Brake Line Fittings.
  • Contains (5) 1/4″ OD Compression Brake Line Fittings.
Check Stock

JooFn Bike V Brake Noodle Cable Guide Pipe Rubber Boots Bicycle Cycling 10 Sets (30Pcs)

  • Included 10 Boots and 10 Noodles(5pcs is 90° bend, another 5pcs is 110° bend), and 10pcs brake cable caps..
  • Tube with a plastic catheter, reduce friction brake line, effectively protect the brake line, reduce brake line resistance..
Check Stock

QLZOZB 7 Pin Trailer Plug 7 Way Trailer Plug 7 Way Round RV-Style Trailer Connector, Detachable 7 Pin Trailer Wiring Adapter Plug

  • ...ompression nut and rubber washer, which can effectively prevent water and moisture, protect the terminal from bad weather and dangerous road conditions, and increase the service life of the 7 way tracker plug.
  • Removable Structure for Upgrading: 7 way round RV style tracker connector adopts removable hardware design, which is easy to splice. The 7-pin plug can be spliced into the existing trailer wiring at any time, and all terminals are firmly fixed with screws to prevent the trailer wire from pulling out of the connector.
  • High Quality Material: The shell of 7 pin trailer plug is made of high-quality heavy plastic, which is sturdy, wear-resistant and anti-corrosion. High quality brass terminals have high and stable conductivity.
  • Easy to Operate: The 7 way trailer plug is ergonomically designed with 2 handle hooks on the side for better grip, allowing you to easily plug in the trailer wiring and trailer lights.
Check Stock

Tektro 984 Black Rear Caliper-Lever-Cable BMX Bicycle Brake Kit

  • You will get: 2 pairs mountain bike brakes with the brake pads fit for most bicycle, road bike, etc..
  • 2 Pieces barrel ended brake cables (2 m in length), 2 pieces cable end caps and 6 pieces end ferrules.
  • Product dimensions: the bike brakes in arch size is 110 mm (4.3 inches), brake pad is 55 mm (2.1 inches), barrel ended brake cables are 2 m in length.
  • Durable material: this bike brakes set is made of alloy and plastic, strong and durable enough for using long time, meet your needs.
  • How to install: 1. crew the fixing hole of the brake corresponding to the body fixing hole.
  • 2. Pass the brake wire through the brake wire tube in sequence, and fix the position of the metal wire tube.
  • 3. Fix the brake line on the bolt, then install the brake leather, adjust the distance, position and length of the brake line, and then fix the brake line firmly.
  • Wide applications: this bike brakes set fits for most bicycles, road bikes, MTB, BMX.
  • Warm note: you need to confirm whether the rear wheel of your car has the mounting hole of this type of brake, please be careful to purchase.
Check Stock

Electric Wheelchair Controller Part Accessories, Joystick Controller, Professional Electric Wheel Chair Joystick Controller Electric Mobility Wheelchairs Accessory Brushed 4P Controller

  • ★Close-loop control of the speed of the non-inductive brushless motor. When the brake is going uphill, the electromagnetic brake when the motor speed is 0 can be detected, which will not slide backward and prevent the wheelchair from turning backwards..
  • ★Automatically recognize whether the motor connector and the electromagnetic brake connector are connected correctly, and can distinguish between reverse connection and wrong connection between the two..
  • ★Electronic energy braking, closed-loop current during braking, uniform braking distance of short-circuit braking force, intelligent charging protection, which can identify whether the charger is connected or not, and has protected the charging connector from being connected reversely. Electric wheelchair joystick controller, fault self-checking, reminding consumers for use and after-sales maintenance..
Check Stock

CNC Mountain Bike V Brake Set, Bicycle V Brake for Front/Rear

  • You will get: 2 pairs mountain bike brakes with the brake pads fit for most bicycle, road bike, etc..
  • 2 Pieces barrel ended brake cables (2 m in length), 2 pieces cable end caps and 6 pieces end ferrules.
  • Product dimensions: the bike brakes in arch size is 110 mm (4.3 inches), brake pad is 55 mm (2.1 inches), barrel ended brake cables are 2 m in length.
  • Durable material: this bike brakes set is made of alloy and plastic, strong and durable enough for using long time, meet your needs.
  • How to install: 1. screw the fixing hole of the brake corresponding to the body fixing hole.
  • 2. Pass the brake wire through the brake wire tube in sequence, and fix the position of the metal wire tube.
  • 3. Fix the brake line on the bolt, then install the brake leather, adjust the distance, position and length of the brake line, and then fix the brake line firmly.
  • Wide applications: this bike brakes set fits for most bicycles, road bikes, MTB, BMX.
  • Warm note: you need to confirm whether the rear wheel of your car has the mounting hole of this type of brake, please be careful to purchase.
Check Stock

4LIFETIMELINES Brake Line Kit – Professional Grade Galvanized Steel Tube 3/16 Brake Line – 25Ft Brake Line Tubing Coil with 16 Fittings

  • FITTINGS INCLUDED: The 4LIFETIMELINES brake line kit was designed for professional use and comes with 16 fittings: Steel Tube Nut 3/16 (3/8-24 I) x 10, Fitting 3/16 (7/16-24) x 2, Steel Tube Nut 3/16 (9/16-18 I) x 2, Fitting 3/16 (1/2-20) x 2..
  • PREMIUM QUALITY & DURABLE: This brake line tubing coil is made with professional grade double-wall galvanized steel tube and zinc coated corrosion-proofing technology, guaranteed to withstand the test of time..
  • ENHANCED FLEXIBILITY: Unlike similar products on the market, this 3/16” brake line meets all SAE and ISO specifications, being highly flexible and allowing for easy bending and shaping without kinking..
  • COMPATIBILITY: The 4LTL professional grade brake line meets SAE J527 international and US standards and requirements, being compatible to use in hydraulic braking systems..
  • EXTRA FEATURES & DIMENSIONS: This brake line tubing coil measures 25ft in length, for a convenient routing and installation. With 0.028” wall thickness, 3/16” OD and universal size, this brake line is a smart and economic replacement!.
Check Stock

BUCKLOS Mountain Bike V Brake Set for Most Bikes V-Brake Calipers with 2PC MTB Road Bicycle Universal Brakes Line Cable Housing and Brake Levers (Front and Rear) City Bike Black Durable

  • 【Complete brake replacement set】It includes a pair of V-brake brakes (and a pair of replacement brake pads), 2 general stainless steel brake lines for mountain highway vehicles (front and rear), 1 brake line protection hose and a pair of brake levers..
  • 【Sturdy and durable】V brake caliper are made of high quality alloy carbon steel, high strength, corrosion resistance, and more durable..
  • 【Quiet braking】The brake pad of V brake clamp adopts all-weather braking formula rubber, which does not damage the rim, is more wear-resistant and braking is quieter..
  • 【Brake kit size】Brake line (front 43.3 inches, rear 66.9 inches) brake line protection hose 98.4 inches, brake arm 4.9 inches, brake pad 2.2 inches, extended size, suitable for most V-brake bicycles.
  • 【Reminder】Before purchase, please carefully check whether there are V brake mounting holes on the front fork and rear fork of your bicycle.
Check Stock

KAWASAKI 2008-2013 Ninja 250R / EX 250 R GALFER REAR STAINLESS STEEL BRAIDED BRAKE LINE KIT

  • Galfer Stainless Steel Braided Brake Lines – Increasing your braking power and feel is as easy as upgrading to the Galfer stainless steel brake lines. These lines will greatly improve your braking effectiveness because there is almost no expansion under pressure, requiring less force to operate at their maximum. The brake lever feel stays firm (less squishy than rubber hoses) at all times..
  • Galfer brake lines consist of three layers. The inner layer is a PTFE type 62 Teflon. The second layer consists of 16 strands of braided stainless steel. The outer layer is a plastic coating that protects the bike from scratches and keeps unwanted moisture out of the line. The kits come standard with polished silver on brass fittings with matching bolts..
  • Galfer brake lines come with a lifetime warranty. Color fade, hazing, even crashing your bike will not void the warranty. Simply contact Galfer directly, supply some information, and get your new line!.
  • All brake lines will be shipped in Galfers Clear (Silver) line color pictured in the main listing photo. Black, White, Smoke, Blue, Red, Gold, Yellow, Green, and Orange line colors are also available upon request . If you would like your line kit in any of these other line colors please contact us before you....
Check Stock

AC PERFORMANCE Stainless Steel -3 AN 3/8x24 Male Flare Union Splits Tee Block With Lug/Mount Tab/Locator, -3 AN to 2x AN3 Male Flare Coupling Union All Sides Hose Fitting

  • Male -3 AN to 2 x -3AN Flare (JIC -3, 3/8×24 thread) with Tab T Pipe Tee Block Hose Fitting Adapter.
  • Works with -3AN TEFLON PTFE Brake and Clutch Hose / Line, Design For Drift / Hydraulic Hand Brake application.
  • AN Male Flare Tee Tube Fitting with Locating Lug Mount Hole.
  • Male -3AN flare all sides Tee cross 3 ways pipe with lug tab locator SL fitting connector.
Check Stock