Categories

Best Brake Line Fitting Assortment

158 Piece Brass Union Tube Nut Brake & Fuel Line Fitting Assortment Kit - 25 Types

  • Our 158 Piece Brake Line Fitting Assortment Contains 25 Types of our most Popular Tube Nut Sizes.
  • Comes inside of a 24 Compartment Clear Plastic Hard Case for easy storage and access..
Check Stock

NEW WILWOOD GO KART BRAKE SET WITH CALIPER PADS MASTER CYLINDER & LINE KIT FOR 1/8 ROTORS GREAT FOR KARTING JR DRAGSTER ETC SOUTHWEST SPEED

  • Wilwood Karting Kit with Brake Caliper & Pads, Master Cylinder, 5' of Nylon Line, & 90 Degree Fitting to use with Caliper if necessary. (Wilwood Part #120-5498, #260-5520, #928-503, & #928-560)..
  • Wilwood Karting Kit with Brake Caliper & Pads, Master Cylinder, 5' of Nylon Line, & 90 Degree Fitting to use with Caliper if necessary. (Wilwood Part #120-5498, #260-5520, #928-503, & #928-560). Kit Includes: Wilwood Go-Kart Caliper for .125" Rotors Fits 0.125" Thick rotors Features Two 1.00" Pistons Weighs only 1.2 lbs. Comes with high friction brake pads..
  • Wilwood Go-Kart Master Cylinder with a 1/2" Bore 1/2" Bore Weighs only .55 lbs. This super lightweight aluminum master cylinder designed specifically for kart & jr. dragster racing applications incorporates an adjustable lever ratio with a remote mount clear fluid reservoir for easy monitoring The assembly comes ready to install and includes billet bracket, lock-wired drilled hardware, & fluid line fitting ..
  • 5 Feet of -3 Nylon Brake Line 3/16" Nylon tubing 5' Should equip most karts with some left-over..
  • 90 Degree Fitting for Caliper Depending on how everything is mounted, the line might run to the caliper at a bad angle for the straight fitting. This 90 degree fitting instal....
Check Stock

4LIFETIMELINES Brake Line Kit – Professional Grade Galvanized Steel Tube 3/16 Brake Line – 25Ft Brake Line Tubing Coil with 16 Fittings

  • FITTINGS INCLUDED: The 4LIFETIMELINES brake line kit was designed for professional use and comes with 16 fittings: Steel Tube Nut 3/16 (3/8-24 I) x 10, Fitting 3/16 (7/16-24) x 2, Steel Tube Nut 3/16 (9/16-18 I) x 2, Fitting 3/16 (1/2-20) x 2..
  • PREMIUM QUALITY & DURABLE: This brake line tubing coil is made with professional grade double-wall galvanized steel tube and zinc coated corrosion-proofing technology, guaranteed to withstand the test of time..
  • ENHANCED FLEXIBILITY: Unlike similar products on the market, this 3/16” brake line meets all SAE and ISO specifications, being highly flexible and allowing for easy bending and shaping without kinking..
  • COMPATIBILITY: The 4LTL professional grade brake line meets SAE J527 international and US standards and requirements, being compatible to use in hydraulic braking systems..
  • EXTRA FEATURES & DIMENSIONS: This brake line tubing coil measures 25ft in length, for a convenient routing and installation. With 0.028” wall thickness, 3/16” OD and universal size, this brake line is a smart and economic replacement!.
Check Stock

Frienda 12 Pieces 3/8 Inch-24 Threads Brake Line Fittings Assortment for 3/16 Inch Tube (4 Unions, 8 Nuts)

  • Fit for: the unions measures approx. 0.6 x 0.9 inch, the nut measures approx. 0.67 x 3/8 inch, fit for most common inverted flare or double flare sizes for 3/16 inch tube, for use with 3/16 inch steel, poly coated or copper brake lines.
  • Please confirm the size of the details according to the picture before purchasing.
  • Size and material: both the unions and nuts are metric 3/8-24 threads (regular 3/16 inch tube fitting size), all brake line fittings are made of quality brass to prevent rust and plated for corrosion resistance.
  • You will get: 12 pieces brake line fittings in the package, include 4 pieces unions and 8 pieces nuts, you can share them with your family and friends, these tubes unions are good fittings.
  • Inverted flare union: these unions are a nice option to join 2 (3/16 inch) brake lines together.
  • Brake line fitting connect: the nut is called the fitting for 3/16 inch tube, these unions fittings have a hex size of 3/8 inch and the threads are 3/8 inch with a thread pitch of 24.
Check Stock

15 Pieces Brake Line Fittings (5 Unions, 10 Nuts) - MuHize 3/8' - 24 Threads Assortment for 3/16' Brake Line Tube

  • PACKAGE INCLUDE - MuHize upgraded Brake Line Fittings Replacement (Pack of 15): ① 5 x 3/8-24 threads unions.
  • ② 10 x 3/8-24 threads nuts. Note：Both the unions and nuts are 3/8-24 threads (regular 3/16 inch tube fitting size). Please check before shopping!.
  • INVERTED FLARE UNIOn- Any 2 (3/16 inch) brake lines can be easy to joined with Muhize unions. both the sizes for unions and nuts are both 3/8-24 threads, which is the regular fitting size for 3/16 inch tube..
  • HIGHER QUALITY - MuHize brake line fittings are made of durable brass with unique rust corrosion proofing technology..
  • WIDELY APPLICATION - MuHize 3/8' - 24 threads fittings commonly fits for regular inverted flare/ double flare sizes for 3/16 inch brake lines tube..
  • PROFESSIONAL - MuHize focus on outstanding features and benefits of braking line. 100% brand new & made from excellent materials, and good contact..
Check Stock

MuHize 15 Pieces 7/16-24 Threads Brake Line Fittings Assortment for 1/4” Brake Line Tube 5 Unions 10 Nuts

  • PACKAGE INCLUDE - MuHize upgraded Brake Line Fittings Replacement (Pack of 15): ① 5 x metric 7/16-24 threads unions.
  • Note：Both the unions and nuts is metric 7/16-24 threads (regular 1/4 inch tube fitting size). Please check before shopping!.
  • INVERTED FLARE UNIOn- Any 2 (1/4 inch) brake lines can be easy to joined with Muhize unions. both the sizes for unions and nuts are both 7/16-24 threads, which is the regular fitting size for 1/4 inch tube..
  • HIGHER QUALITY - MuHize brake line fittings are made of durable brass with unique rust corrosion proofing technology..
  • WIDELY APPLICATION - MuHize 7/16-24 threads fittings commonly fits for regular inverted flare/ double flare sizes for 1/4 inch brake lines tube..
  • PROFESSIONAL - MuHize focus on outstanding features and benefits of braking line. 100% brand new & made from excellent materials, and good contact..
Check Stock

MuHize Brake Line Fittings - 18 Pieces 3/8' - 24 Threads Fittings Assortment for 3/16' Brake Line Tube (6 Unions, 12 Nuts)

  • PACKAGE INCLUDE - MuHize upgraded Brake Line Fittings Replacement (Pack of 15): ① 6 x 3/8-24 threads unions.
  • ② 12 x 3/8-24 threads nuts. Note：Both the unions and nuts are 3/8-24 threads (regular 3/16 inch tube fitting size) . Please check before shopping!.
  • HIGHER QUALITY - MuHize brake line fittings are made of durable brass with unique rust corrosion proofing technology..
  • INVERTED FLARE UNIOn- Any 2 (3/16 inch) brake lines can be easy to joined with Muhize unions. both the sizes for unions and nuts are both 3/8-24 threads, which is the regular fitting size for 3/16 inch tube..
  • WIDELY APPLICATION - MuHize 3/8' - 24 threads fittings commonly fits for regular inverted flare/ double flare sizes for 3/16 inch brake lines tube..
  • PROFESSIONAL - MuHize focus on outstanding features and benefits of braking line. 100% brand new & made from excellent materials, and good contact..
Check Stock

Utah Pneumatic Dot Air Fittings Tee Union 1/4”Od 1/4” Npt Air Push Fittings Male Female brake tube fittings Push In Fitting D.O.T Approved For Sae Brake Line fittings Applications Pack Of 2

  • Typical application: Air brake systems push dot fittings pneumatic fittings brass air brake fittings dot air line fittings.
  • Maximum operating pressure of 150 psi dot air brake fittings air line fittings 1/4 dot push union dot compliant air line fittings.
  • Temperature Range:_65°F to +250°F-40°C to +93°C push-to-connect fittings ptc air fittings push lock fittings.
  • Material:CA360 ,CA377 brass push air fittings tee brass fitting airline tee fitting air fittings 1/4 dot.
Check Stock

DOT Brass Air Line Quick Connect Fittings Assortment, 34 Pcs DOT Push to Connect Air fittings 1/4" 3/8" 1/2" Air Fitting Kit with 1/4" Schrader Valve Air Line Fittings for Trucks or Industrial

  • 【PREMIUM MATERIAL】：Our dot push to connect air fittings are made of high quality CA360 brass, meet D.O.T. FMVSS 571.106, SAE J1131 with corrosion resistance, high temperature ductility and low permeability. Long service time, air brake fitting assortment type: 1/4", 3/8", 1/2"..
  • 【TYPICAL APPLICATION】：The dot air line quick connect fittings can be used with air suspension systems, copper tubing in air lines brake systems, perfect for truck /RV repair air line leak, also perfect for industrial workshops, daily garden or lawn mower repair, towing machine hose connection and so on..
  • 【EASY TO INSTALL】：Pre applied red sealant for male thread for better sealing. All brass quick connect air fittings can be sealed by pushing the tube firmly into the fittings, simply depress button to remove tubing..
  • 【MAX PRESSURE】：Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer's recommendations for pressure and temperature mutations).
  • 【ALL IN ONE SET】: Unique DOT Air Brake fit....
Check Stock

EilxMag DOT Brass Air Line Quick Connect Fittings, PBT Push-To-Connect-Fittings NPT Male Thread & Brass Air Brake Line Fittings Kit (Pack of 44)

  • ...t air line quick connect fittings are made of PU, Plastic, the air line fittings DOT approved are made of high quality CA360 brass, with corrosion resistance, high temperature ductility and low permeability. Great for long time use..
  • 【Quantity】: Unique dot air fittings assortment: The plastic tube fittings contain 28 pieces: 8 pcs Male straight push connectors, 6 pcs Straight tube unions. 6 pcs 90 degree Elbows. 4 pcs 90 degree Elbows NPT thread. 4 pcs Tube tees. The brass tube fittings contain 16 pieces: 5 pcs Male connectors. 5 pcs Male 90° elbows. 3 pcs Tube tees. 3 pcs Tube unions. Fit type: 1/2", 3/8", 1/4"..
  • 【Typical Application】: The air hose kit fittings are suitable for PU / PA / PE / PVC. The air brake fittings assortment kit can be used with air systems, and copper tubing in air brake systems. They are widely applied in automotive, manufacturing production lines, car or truck repair, industrial workshops, daily garden or lawn mower repair, towing machine hose connections and so on..
  • 【Easy to install】: Quick disconnect simply push tubing in, no tools or loose parts to handle i....
Check Stock

Brake Line Fittings - MuHize 32 PCS Brass Brake Line Fitting Kit for 3/16\ and 1/4\ Inverted Flares Brake Line Tube

  • PACKAGE INCLUDE -Part 1: MuHize upgraded 16 Fittings for 3/16”Brake Line: ① 2 x 3/16” (7/16-24) Inverted Tube Nut.
  • ② 10 x 3/16" (3/8-24) Inverted Tube Nut.
  • ③ 2 x 3/16” (1/2-20) Inverted Tube Nut.
  • ④ 2 x 3/16"(9/16-18) Inverted Tube Nut.
  • PACKAGE INCLUDE - Part 2: MuHize upgraded 16 Fittings for 1/4”Brake Line: ① 2 x 1/4”(7/16-24) Inverted Tube Nut.
  • ② 10 x 1/4” (7/16-24) Inverted Tube Nut (Long).
  • ③ 2 x 1/4”(9/16-18) Inverted Tube Nut.
  • ④ 2 x 1/4”(1/2-20) Inverted Tube Nut.
  • Note：The nut threads are regular 1/4 inch tube fitting size. Please check before shopping!.
  • HIGHER QUALITY - MuHize brake line fittings are made of durable material with unique rust corrosion proofing technology..
  • WIDELY APPLICATION - MuHize 3/8' - 24 or 7/16-24 threads fittings commonly fits for regular inverted flare/ double flare sizes for 3/16 or 1/4 inch brake lines tube..
  • PROFESSIONAL - MuHize focus on outstanding features and benefits of braking line. 100% brand new & made from excellent materials, and good contact..
Check Stock

MuHize Brake Line Fittings - 15 Pieces 3/8 -24 Threads Assortment Brake Fitting for 3/16 Inch Brake Line Tube 5 Unions 10 Nuts

  • PACKAGE INCLUDE - MuHize upgraded Brake Fittings Replacement (Pack of 15): ① 5 x 3/8-24 threads unions.
  • ② 10 x 3/8-24 threads nuts. Note：Both the unions and nuts is 3/8-24 threads (regular 3/16 inch tube fitting size) . Please check before shopping!.
  • INVERTED FLARE UNIOn- Any 2 (3/16 inch) brake lines can be easy to joined with Muhize unions. both the sizes for unions and nuts are both 3/8-24 threads, which is the regular brake fitting size for 3/16 inch tube..
  • HIGHER QUALITY - MuHize brake fittings are made of durable brass with unique rust corrosion proofing technology..
  • WIDELY APPLICATION - MuHize 3/8' - 24 threads fittings commonly fits for regular inverted flare/ double flare sizes for 3/16 inch brake lines tube..
  • PROFESSIONAL - MuHize focus on outstanding features and benefits of braking line. 100% brand new & made from excellent materials, and good contact..
Check Stock

4LifetimeLines 25' 3/16 True Copper-Nickel Alloy Non-Magnetic Brake Line Replacement Tubing Coil and Fitting Kit, Inverted Flare

  • Nickel-copper alloy is very flexible making for super easy bending & flaring for installation - You can hand bend our brake lines with no bending tools needed.
  • Rust and corrosion proofing technology - Our Copper Nickel Alloy lines are the longest lasting line and are much better than standard steel tubing. Copper Nickel lines are ideal for vehicles experiencing harsh weather and environmental conditions.
  • Meets all SAE and ISO specifications - Our tubing is the best quality tubing on the market.
  • We take pride in producing the best fuel, transmission and brake lines in the industry. Our Limited Lifetime warranty protects all of our products against defects for its entirety as long as it is installed correctly.
  • Complete Brake Line Replacement Tubing Kit Assortment - Includes 16 Fittings: 2 x 3/16” (7/16-24) Inverted Tube Nut, 10 x 3/16” (3/8-24) Inverted Tube Nut, 2 x 3/16” (1/2-20) Inverted Tube Nut, 2 x 3/16” (9/16-18) Inverted Tube Nut.
Check Stock