Categories

Best Brake Pad Alignment Tool

ABN Brake Tools 15-Piece Brake Kit with Brake Caliper Tool Brake Drum Puller Brake Adjusting Tool – Brake Tool Set

  • SERVICE BRAKES WITH THIS CALIPER COMPRESSION TOOL: The ABN Disc Brake Caliper Tool Set allows you to work on bearings, seals, axles, adjust clearance between drum brakes and shoe, or remove or install shoe return springs and brake pads.
  • This brake tools rear brake caliper tool set rotates the parking brake activated piston into the caliper cylinder.
  • FITS YOUR VEHICLE: Brake caliper compressor made for both disc and drum systems and covers most sizes of bearings and seals.
  • Press bearings and races into an open hub wheel assembly on most European and American cars.
  • Some tools in the kit are disk brake specific, such as the caliper piston retractor.
  • If you have a vehicle with rear disk brakes and a parking brake that uses the rear calipers, you will need the cube tool to spin and retract the caliper piston.
  • BUILT TO LAST: Brake pad spreader brake compressor tool pieces are constructed from chrome-vanadium steel (CR-V) for maximum strength and longevity.
  • The brake caliper press brake caliper kit pushes the caliper piston onto the disc brakes without disc brake caliper parking brake mechanism.
  • Caliper press brake pad tool kit provides access around emergency brake lever to service brake retaining spring.
  • EASY STORAGE: No longer will you need to worry about y....
Check Stock

2 Pairs Road Brake Pads with Installation Tool Caliper Brake Blocks 50 mm

  • 2 Pairs C brake pads: the bike brake pads are made of hard-wearing rubber which can decrease noise and provide good braking power in wet and dry conditions.
  • Size: the road brake pad is about 50 mm/ 1.97 inch in length.
  • Each piece has a nut and a spacer, it's easy to remove and install with the tool.
  • V shaped water-leaking tanks: c brake pads with V-shaped tank design will do no harm to the wheel, and improve braking ability.
  • Good compatibility: this versatile c brake pads are suitable for most road brake bikes.
  • Each pair c brake pad has left and right part, without front and rear, every piece brake pad has a text mark.
  • Quantity: package include 2 pairs (4 pieces) road brake pads with a tool.
  • Come with the lightweight tool for easy installation.
Check Stock

Kent. 20 Girls Trouble Aqua/black Bicycle

  • 2 Pairs C brake pads: the bike brake pads are made of hard-wearing rubber which can decrease noise and provide good braking power in wet and dry....
  • Size: the road brake pad is about 50 mm/ 1.97 inch in length.
  • Each piece has a nut and a spacer, it's easy to remove and install with the tool.
  • V shaped water-leaking tanks: c brake pads with V-shaped tank design will do no harm to the wheel, and improve braking ability.
  • Good compatibility: this versatile c brake pads are suitable for most road brake bikes.
  • Each pair c brake pad has left and right part, without front....
  • Quantity: package include 2 pairs (4 pieces) road brake pads with a tool.
  • Come with the lightweight tool for easy installation.
Check Stock

ABN Brake Drum Tool Kit 15-Piece Service Brake Kit with Spring Pliers Brake Spoons Pad Gauge Brake Spring Tool

  • PROFESSIONAL GRADE AUTOMOTIVE TOOLS: The ABN 15-piece Drum Brake Service Kit is designed to allow you to remove and replace worn and broken brake parts and to make it easier to reach other parts.
  • These rear brake tool sets are designed to be used on most foreign and domestic cars and trucks.
  • SERVICE YOUR VEHICLE BRAKES: Whether you are a seasoned mechanic or a home mechanic, this automotive tool set allows you to service your vehicle brakes by making it easy to replace springs, check your pads, and reach other parts of the drum brake system.
  • EASY TO USE: The spring installer, remover, and retainer tools help to adjust brake springs safely to get to deeper parts of your brake system while the various adjustment spoons help you adjust clearance between the drum brake and brake shoe.
  • The 8 brake lining thickness gauges help you to identify thickness levels to know when its time to change your pads.
  • BUILT TO LAST: Constructed of heavy-duty metal, these brake tools are designed for durability and longevity.
  • Each standard sized brake adjusting tool has a chrome finish to protect from rust and corrosion.
  • The spring puller tool, spring installation tool, and spring retainers have ergonomic handles for comfort when using.
Check Stock

EWK Brake Caliper Press Tool Piston Spreader Pad 360 Degree Swing Ratchet with 2 Pcs Steel Plates

  • 【 Versatile Tool 】 EWK brake caliper press tool comes with two pairs of press plates: 4.53x2.24 inches and 5.79x3.36 inches. Ideal for most large trucks and commercial vehicles with single, double, and four side pistons brake caliper..
  • 【 Time & Effort Saver 】 360-degree swing design makes the brake caliper compression tool easy to insert into the caliper and use from any direction..
  • 【Easy to Use】 Centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components..
  • 【 Ratcheting Design 】 Because of the ratcheting mechanism, you will need to apply some pressure to squeeze the spreaders inward, then you are able to spread the brake tool to fit into your caliper. Fully retract: 1.59”.
  • 【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 months warranty. If there is any problem or concern with our products, please contact us for assistance..
Check Stock

YSTOOL Pneumatic Brake Caliper Piston Wind Back Compression Spreading Tool 23PCS Kit Rewind Spreader Air Tool Set to Repair Brake Pad Change Brake Pump for Cars Trucks

  • Brake caliper tool set comes with a brake compression tool and 22 drive key disc adapters, making it a easy job to push the brake caliper piston back without others' help. YSTOOL pneumatic brake pad caliper tool fits for a variety of domestic and foreign vehicles with windback pistons and push back pistons, performing services on many brake repair jobs like brake pump regulating, brake pads replacement, etc..
  • YSTOOL brake tools are compatible with Ford, Alfa Romeo, Audi, BMW, Citroen, Fiat, Alfa Romeo, Honda, Range Rover, Jetta, Jaguar, Subaru, Mazda, Mercedes, Mitsubishi, Nissan, Renault, Saab, Iveco, Toyota, Volvo, VW, etc. Just choose one adapter, connect the brake piston caliper tool to shop air, press air trigger(til the end) and rotate swivel rod to rewind brake piston, then release pressure before tool removal by pressing air release button..
  • Compared with manual brake caliper spreading tool, pneumatic brake caliper tool is more laborsaving, convenient and environment-friendly. Only one tool is needed to satisfy for use with left and right hand threaded pistons by rotating the long swivel handle freely, no need to gather two sets of left and right hand thrust bolt assemblies and waste time to try which one is right. YSTOOL caliper piston re....
Check Stock

Segomo Tools 360 Degree Swivel Joint Slip Resistant Heavy Duty Brake Pad Spreader Tool | Brake Compression Tool | Brake Pad Tool | Disc Brake Pad Spreader | Brake Caliper Tool - BPST01

  • [ Do The Job Quickly ] This brake pad spreader is ideal for compressing inner brake pads and resetting pistons for fast break pad replacement..
  • [ Comfortable To Use ] Tighten by hand with the built-in easy to turn slip resistant comfortable knob and threaded driver..
  • [ Will Last In Time ] Our brake tool is made from high carbon steel and chrome vanadium mix for added strength and corrosion resistance..
  • [ Be Precise ] 360 degree swivel joint of our brake spreader is designed for even and precise compression force..
  • [ Versatile Use ] Compatible with domestic cars and light trucks and is ideal in tight areas where a C-Clamp won't work. HOW TO USE: 1 - Use your old brake pad in conjunction with this brake pad spreader tool to compress the piston. 2 - Open the brake master cylinder cap before compressing and monitor the fluid level so it does not overflow. 3 - After changing the brake pads, start the vehicle and pump the brakes before driving..
Check Stock

Lang Tools 277 Brake Caliper Press

  • 【Fit for Disc Brake】 The brake caliper press tool is equipped with two groups of push boards: 7.01x2.36 inches and 4.53x2.17 inches, Suitable for....
  • 【Working Principle】The spreader can spreading to push the boards or retracting when finished it. (Ajust by the switch). In expanded mode, the....
  • 【How to use】Make the push boards both sides Centralized Alignment the pistons, let both sides of the push boards be forced at the same time (press....
  • 【Size Reference】Two groups of push boards size: 7.01x2.36 inches and 4.53x2.17 inches.
  • Telescopic range: fully retracted: 1.88”, fully expanded:....
  • Two-Year Customer Service for Five Bananas Brake Caliper Tool. Pls email us first when you have any problem, we promise will provide the best....
Check Stock

JMMRRR Automotive Brake Caliper Press Tool with 2 PCS Steel Plates Ratcheting Caliper Piston Tool with 360 Degree Swing Ratchet Blue

  • 【360° Ratcheting Design】Adopts 360 degree ratchet design, it is easy to get into place and use from any direction, the ratchet is in the centre of the dual piston brake caliper compressor, both spreading plates need pressure to start the ratchet, to ensure correct alignment to prevent the piston from being misaligned and damaging the brake components..
  • 【Brake Hook & Reversing Switch】Two caliper hooks to protect the brake fluid lines and calipers provides maximum protection for the brake fluid lines and the brake calipers, there is a small positive and negative regulation switch on the ratchet, you can flip it to realize the conversion of expand and retract spreading plates..
  • 【Comfortable And Durable】This brake caliper compression automotive tool is made of alloy steel, high strength, not easy to deform, which has corrosion resistance, the blue rivet handle is made of rubber, it conforms to ergonomic design, which is non-slip, comfortable grip, uniform force, will not hurt your hands during use..
  • 【Wide Range Of Applications】The caliper piston spreader press ....
Check Stock

JMMRRR Automotive Brake Caliper Press Tool with 2 PCS Steel Plates Ratcheting Caliper Piston Tool with 360 Degree Swing Ratchet Red

  • 【360° Ratcheting Design】Adopts 360 degree ratchet design, it is easy to get into place and use from any direction, the ratchet is in the centre of the dual piston brake caliper compressor, both spreading plates need pressure to start the ratchet, to ensure correct alignment to prevent the piston from being misaligned and damaging the brake components..
  • 【Brake Hook & Reversing Switch】Two caliper hooks to protect the brake fluid lines and calipers provides maximum protection for the brake fluid lines and the brake calipers, there is a small positive and negative regulation switch on the ratchet, you can flip it to realize the conversion of expand and retract spreading plates..
  • 【Comfortable And Durable】This brake caliper compression automotive tool is made of alloy steel, high strength, not easy to deform, which has corrosion resistance, the red rivet handle is made of rubber, it conforms to ergonomic design, which is non-slip, comfortable grip, uniform force, will not hurt your hands during use..
  • 【Wide Range Of Applications】The caliper piston spreader press t....
Check Stock

Toolwiz Universal Adjustable Magnetic Gauge Tool Camber Castor Strut Wheel Alignment Tools for Car Truck RV Tire Repair Caster Alignment Castor Wheel Gauge Camber Alignment Tools Camber Gauge

  • Universal automotive tool for wheel alignment, caster camber gauge compatible with BMW, Benz, Chevrolet, Toyota, Honda, Jeep, Citroen..
  • This Wheel Alignment Balancing Tools allows you to return the strut to the original camber position after dismantling and re-assembling the suspension....
  • The alignment gauge is suitable for accurate checking of the castor and camber angle. Measures the camber and caster angle on the wheel hub or brake....
  • With it's strong magnetic attraction, the camber alignment tool can easily attached on all kind metal surfaces..
  • Alignment tools automotive: Easy to read through accurate scale with range of measurement from -5 up to +5 degrees. You can ask seller for sending....
Check Stock

YXGOOD Universal Magnetic Gauge Tool for Car Truck Adjustable Camber Castor Strut Wheel Alignment

  • 【Accurate Measurement】Measures the Camber and Caster angle on the wheel hub or brake disc. Attach the magnetic gauge to the hub or disc brake,suitable for accurate checking of the castor and camber angle Wheel Alignment tool"..
  • 【Adjustable Gauge】Allows you to return the strut to the original camber position after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing..
  • 【Multi-Function】The magnetic gauge tool has a powerful magnet it can easily attached on all kind metal surfaces.Also it could be used as a normal gradienter.(Note:Please double check and make sure the panel is balance before using.You could screw the button behind the gauge to adjust panel level).
  • 【Easy To Read】Size: 4.5’’*1.2’’*0.8’’,it has a simple leveling adjustment from -5 degrees to 5 degrees.Body of gauge is made of high density aluminum and precision level vial,high strength plasticity..
  • 【Professional Tools】Allows adjustment to maintain correct wheel alignment and even tyre wear.Suitable for automobile cars motorcycles trucks vans SUV tire repair..
Check Stock

Segomo Tools Adjustable Universal Magnetic Camber Gauge | Camber Alignment Tool | Alignment Car Tool | Wheel Alignment Tool | Castor Wheel Gauge | Magnetic Gauge Tool | Caster Alignment - WCC01

  • [ Versatile Use ] Our alignment tool is ideal for measuring and checking the camber and castor angle on a wheel hub or brake disc, maintaining correct wheel alignment even after tire wear and can also be used as a normal gradienter..
  • [ Unversal Camber Tool ] Allows you to return the strut to the original camber position after dismantling and re-assembling or to check the amount of camber change before re-installing..
  • [ Easy-To-Use Magnetic Gauge ] Features a simple to use and easy to read leveling adjustment from -5 degrees to 5 degrees with a powerful magnet for easy mounting on all kinds of metal surfaces..
  • [ Durable Design ] Our alignment car tool is made from high-quality aluminum for strength and durability with precision vials for accurate measuring..
  • [ Multi-Purpose Camber Tool ] Suitable for motorcycles, automobile cars, vans, trucks and SUVs..
Check Stock