Categories

Best Brake Pad Guide Pin

BossBearing Rear Brake Caliper Rebuild Kit for Yamaha YFS200 Blaster 2003 2004 2005 2006

  • Kit Contains: The necessary seal components, including the pad hanger pin(s), to rebuild one brake caliper..
  • Please note: This kit rebuilds only 1 brake caliper..
Check Stock

Eyech 2 Pair Bike Brake Pads Set Bicycle V-Brake Blocks with 4 Replacement Pads Hex Nuts and Shims Included for MTB Road Mountain Bicycle-70mm

  • Including 2 sets of front & rear 70mm brake pads with hex nuts and shims..
  • The V Brake Blocks are made by high quality native rubber, durable and quiet..
  • V-shape sand guide slots design prevent damages from sand, mud and stone to the wheel rims, greatly increase brake pads' stopping power..
  • Each pair brake shoes have one left and one right brake pad, please recognize the mark before installation..
  • This V Brake pads is universal replacement part for mountain bike, road bicycle, MTB, BMX.
Check Stock

ABN Brake Tool Sets w/ 18 Pc Disc Brake Caliper Tool Kit & 8 Pc Drum Brake Tool Kit – Removal and Installation Tools

  • PROFESSIONAL AUTOMOTIVE TOOLS: The ABN 18-piece Brake Caliper Set and 8-piece Drum Brake Kit is designed to allow you to remove and replace worn and broken brake parts such as bearings, seals, axles, shoes, pistons, springs, pads, calipers, and rotors.
  • Rear brake caliper tools are designed to be used on most foreign and domestic cars and trucks.
  • BRAKE CALIPER WIND BACK TOOL SET: Each piece of the 18-piece brake caliper compressor tool set is constructed of heavy-duty metal for durability and longevity.
  • This set includes a left-handed and right-handed thrust bolt and 15 disc adaptors that are compatible with a wide range of vehicles.
  • All parts in this brake piston compressor tool set are designed to prevent damaging pistons and seals.
  • DRUM BRAKE TOOLS: This 8-piece professional grade brake set includes 3 varying sizes of brake spoons to easily adjust most brake drums and 5 varying brake spring tools to service these drum brakes.
  • Constructed of heavy-duty metal and ergonomic plastic handles, the brake piston compression tool set provides you with the perfect grip and durability for your project.
  • EASY STORAGE: Heavy-duty 14 x 3 x 12.3-inch (35.5 x 7.6 x 31.2 cm) plastic blow-molded carrying case with latches and handle protects these brake kits for easy tr....
Check Stock

Hitch Cover LED Brake Light Towing Hitch Insert

  • Bright 12 L.E.D. Brake Light Hitch Insert. Protects your hitch receiver from rust, mud and corrosion.
  • Extra Long 12" Flat Style 4 Prong Standard Plug. 16 AWG x 2C x 10″ wire.
  • Built-in brake light provides added safety when your hitch is not in use. Great for Cars, Trucks, RVs, and trailers.
  • Overall LED Light Dims: 3” x 3”. 12 bright LED lights last much longer than regular bulbs.
  • Foam pad 1/2" Thick Gasket prevents rattle and ensures a snug fit. Htich Pin Included. Fits all 2 in. trailer hitch receivers.
Check Stock

FOTU 661 Brake Guide Pin Grease - Brake Buster Wheel Cleaner for Car Silicone Paste Automotive (4 Oz x 1-Pack)

  • This product is silicone grease, which is resistant to high temperature and has good compatibility with rubber dust boot.
  • When using, please apply it evenly on the cleaned surface of the guide pin of the brake wheel cylinder and the dust boot installation groove. The cylinder piston can also be used. Do not mix with other grease.
  • It can well keep the softness and elasticity of dust cover of the caliper cylinder, lubricate the guide pin to prevent rust and jam, and prolong the service life of the caliper.
  • This product has a shelf life of 5 years, and FOTU is a professional manufacturer specializing in making all kinds of lubricating grease, which is trustworthy.
  • Our store promises a 100% refund if the goods are not satisfied.
Check Stock

EBC Brakes EBPCK1015 Complete Semi-Sintered V-Pads Brake Pad Change Kit

  • Fits: Harley Davidson FLHX Street Glide 2008-2013, FLHX Street Glide 2014-2015, FLHXS Street Glide Special 2015.
  • Complete Semi-Sintered Touring Bike V-Pads Brake Pad Change Kit includes 2 EBC FA409V Front Brake Pads and 1 EBC FA409V Rear Brake Pad.
  • EBC Brakes Semi-Sintered V-Pads are a new blended Semi-Sintered brake pad that combine the highest qualities of an organic brake pad with the endurance of a sintered equivalent brake pad.
  • The V-Pad range have been dyno tested and prove to be longer lasting than other cheap sintered aftermarket brake pads.
  • The Vee brake pad range are designed for the heavy cruiser/street bike market as a replacement brake pad.
Check Stock

Aurora Racing 2 Pair lot of Carbon Brake Pads, Carbon Wheels Ceramic Brake Shoes, fit Carbon Rims Use

  • Slightly curved design doesn't hurt the wheel and provide better stopping power, less noise, Their unique compound allows for unprecedented performance on carbon braking surfaces..
  • the water-leaking tanks of v brake pad will help stop power of your bike in most adverse weather conditions,Unique sand-guide grooves effectively prevent sand stone damages to the wheel rims..
  • Can be used on any tubular or clincher rim with a carbon braking surface ,Original Black Brake Pad Set provides superior breaking on aluminum rims and is the best option for your Shimano and SRAM calipers..
  • Use: Road bikes, Kids Bicycles, BMX, Cruisers,City bike..
Check Stock

Tektro HD-e350 eBike Hydraulic Disc Brake with 2Pcs 160/180mm Rotor

  • 【Electric Induction Control System】With power cut-off sensor, when braking, the signal is sent to the electronic control system to power off the motor. Cable length 190mm. Please pay attention to check whether the segment of the wiring port matches..
  • right rear 1850mm. This hydraulic disc brake is only suitable for ebikes. 【Oil】Non-corrosive environmentally friendly mineral oil..
  • 【Caliper】 Forged aluminum body. Open system, 2 piston. Weight Front: 302g / Rear: 322g. 【Brake Lever】:Cast aluminum lever & bracket. Two-pieces clamp. 3 finger blade..
  • 【Rotor】Diameter 180mm. Thickness 1.8mm. Weight 150g each. Lightweight polygonal guide design. High heat dissipation and heat resistance. 【Pads】High-performance metal-ceramic composites, low noise resin pad..
  • Note: the rear calipers and lever came in separate pieces so you can route internally. The brake hose were already filled with brake fluid, so you need to be careful not to spill the brake fluid when you install it..
Check Stock

Alritz Professional Bike Brake Pads, 6PCS Professional V-Brake Pads Set for Universal Road Mountain Bicycle Front and Back Wheel, No Noise (Green)

  • Thickened Wear-resistant Material: made of natural rubber, non-recycled plastic, doubles the wear resistance, durable, noiseless, no skidding..
  • Limited Use Tips: Each brake pad has 3 horizontal lines representing the use condition, so you will know at a glance if it needs to be replaced. The first line is a reminder to replace the brake pads, the second line is that the braking effect will weaken, and the third line is that the brake pads must be replaced..
  • Professional Design: V-shaped sand guide groove design prevents sand, mud, and stones from harming the rim, and the braking power of the brake pads is increased by half..
  • Compatible with V-brake system: These brake pads are suitable for bikes over 20 inches and all v-brake systems, please check the design of your bike before purchasing..
  • Easy to Install: Includes 3 sets of front and rear brake pads with hex nuts and pads and 1 hex wrench for installation.
Check Stock

Alritz Bike Brake Pads Set, 4 Pairs Road Mountain Bicycle V-Brake Blocks Shoes with Hex Nut and Shims, No Noise No Skid, 70mm (Black)

  • Including 4 pairs of 70mm brake pads which are suitable for most of V-brake road bike, mountain bike. Each pair have left and right, please read the text mark on the brake pads before installation.
  • Made of hard-wearing rubber and aluminum alloy, these brake pads are supreme durable and long-lasting for all weather.
  • Unique sand-guide grooves effectively prevent sand/stone damages to the wheel rims.
  • Slightly curved design doesn't hurt the wheel and provide better stopping power, less noise.
  • Each brake pad comes with 1 piece hex nut and 5 pieces spacers. A hex wrench is provided for easy installation and remove.
Check Stock

The ROP Shop | 4 Brake Band with Cable Pin fits Yerf-Dog Go Karts with 4-3/16 OD Brake Drums

  • The ROP Shop replacement 4" Brake Band with Cable Pin fits Yerf-Dog Go Karts with 4-3/16" OD Brake Drums.
  • Specs - Pin Height: 7/8". Fits 4 3/16" Outside Diamter Brake Drum. Refer to images 2 & 3 for more information.
  • Includes - (1) Brake Band & (1) Cable Pin.
  • This fits Manco Bandit & Critter go-karts and may also retrofit on Yerf-Dog go-karts with 4-3/16" brake drums.
  • Fits Stens 260-141 & Rotary 485 Brake Drum (brake drum NOT included).
Check Stock

Lisle 38780 22' Square No-Splatter Pad

  • 22” Square Pad Protects Floors & Work Area from Messy Oil Splatter..
  • Insert 22" square pad in transmission drain funnels or larger oil drain pans, before oil change to eliminate oil splatter..
  • Porous material allows fluid to quickly pass through into funnel or pan..
  • Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents..
  • Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents.Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents..
  • Important: Not for coolants or fluids that will be recycled in the vehicle. Material fibers may contaminate the fluid..
Check Stock

Xotic Tech Smoked Lens Trailer Hitch Cover w/Trailer Adapter Hitch Pin Red Square Brake Tail Light Compatible with Truck SUV 2'' Towing Hitch Receiver, Pure Red 15-SMD (Size:3.25" x 4.33")

  • 【High Brightness】Powered by 15-LED diodes for super bright output which create a bright vision and even adds additional safety visibility features. Enhance lighting in rainy and foggy days to avoid traffic accident..
  • 【Safety】Compared to the current 9-LED brake lights with only bright mode, our ones have running tail light & brake light function, provides the optimal balance of light output so that drivers behind you can see you and helps prevent 98% of accident..
  • 【Wide Compatibility】The tow hitch mounted LED brake light can fit standard 2" tralier hitch receiver with a standard 4-pin trailer adapter for the LED brake light to power. If it does not, you will have to purchase a 7-pin to 4-pin adapter..
  • 【Easy Installation】Specially Upgraded 4-Pin adapter with tail light and brighter brake light modes,much longer wiring,make it easy to install. Comes with a hitch pin with lock and foam lining to ensure a snug fit.
  • 【Features】Special IC built in to ensure the tow hitch mounted LED tail/brake light doesn't flash when only your turn signals are on. If both....
Check Stock