Categories

Best Brake Pad Inspection Measurement Tool

2 Pairs Road Brake Pads with Installation Tool Caliper Brake Blocks 50 mm

  • 2 Pairs C brake pads: the bike brake pads are made of hard-wearing rubber which can decrease noise and provide good braking power in wet and dry conditions.
  • Size: the road brake pad is about 50 mm/ 1.97 inch in length.
  • Each piece has a nut and a spacer, it's easy to remove and install with the tool.
  • V shaped water-leaking tanks: c brake pads with V-shaped tank design will do no harm to the wheel, and improve braking ability.
  • Good compatibility: this versatile c brake pads are suitable for most road brake bikes.
  • Each pair c brake pad has left and right part, without front and rear, every piece brake pad has a text mark.
  • Quantity: package include 2 pairs (4 pieces) road brake pads with a tool.
  • Come with the lightweight tool for easy installation.
Check Stock

Autel Code Reader Diaglink (DIY Version of MD802) All Systems/Modules Diagnostic for ABS, SRS, Engine, Transmission etc, EPB, Oil Reset

  • Important: You need to select and download vehicle software by yourself. You can FREE get one vehicle make software and purchase another by paying USD10 for each vehicle manufacturer.
  • All systems diagnosis: The scan tool capable of accessing every module, it is the combination of all systems access (Engine, Transmission, ABS, SRS…and more).
  • Wide codes diagnosis: Turns off the ECU and brake warning light, set brake pad thickness and open/close brake calipers, Oil/Inspection/Service light reset.
  • Complete obdii functions: Read Codes, Erase Codes, Live Data, Freeze Frame, I/M Readiness, O2 Mon.Test, On-Board Mon.Test, Component Test and Enhanced OBD II Mode 6.
  • Warranty & update: 12-month guarantee and FREE lifetime software update. The diagnostic scanner compatible with Windows PC only..
Check Stock

Kent. 20 Girls Trouble Aqua/black Bicycle

  • 2 Pairs C brake pads: the bike brake pads are made of hard-wearing rubber which can decrease noise and provide good braking power in wet and dry....
  • Size: the road brake pad is about 50 mm/ 1.97 inch in length.
  • Each piece has a nut and a spacer, it's easy to remove and install with the tool.
  • V shaped water-leaking tanks: c brake pads with V-shaped tank design will do no harm to the wheel, and improve braking ability.
  • Good compatibility: this versatile c brake pads are suitable for most road brake bikes.
  • Each pair c brake pad has left and right part, without front....
  • Quantity: package include 2 pairs (4 pieces) road brake pads with a tool.
  • Come with the lightweight tool for easy installation.
Check Stock

ABN Ratcheting Caliper Piston Tool – 4 in 1 Disc Brake Caliper Compression Tool Universal Brake Caliper Spreader Tool

  • BRAKE CALIPER PISTON TOOL: Use the ABN Ratcheting Brake Caliper Compressor Tool to compress pistons quickly and easily into the calipers.
  • Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads.
  • Quad and dual piston brake caliper tool comes pre-lubricated to protect against oxidation.
  • It is suggested to lubricate between uses.
  • 4 IN 1 TOOL FITS YOUR VEHICLE: Disc brake caliper tool set includes 2 sets of piston plates that spread from 1-9/16 to 2-3/8 inches (2.5 to 5.1 cm) to allow plenty of room to install new brake pads.
  • Use as a single piston caliper tool, a dual piston caliper tool, a quad piston caliper tool, and a rear brake caliper tool.
  • This versatile caliper piston compressor tool is ideal for cars, trucks, and some commercial vehicles.
  • Works on both fixed and floating calipers.
  • RATCHETING ACTION: Brake piston compression tool provides a 360-degree swing that allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates.
  • Centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components.
  • Reverse tool movement to retract compression p....
Check Stock

Kauplus Brake Service Kit, 14-Piece Professional Drum Brake Tool Set w/Brake Lining Gauge…

  • Idea for servicing drum brakes on most of import and domestic vehicles adjustment, installation and removal application.
  • Various of TPR grip Brake Spring tool, each of spring compressor, brake spring installer, spring removal tool and brake retaining.
  • Tri-function Brake spring pliers removes and replaces shoe return springs of drum brakes effectively.
  • 14 pcs Brake Service Kit all the contains Made in Taiwan, comes in an organizer tray, with Brake Lining Gauge, identifies thickness level ranges for brake lining inspection to be used on most foreign and domestic cars and trucks.
Check Stock

ABN Brake Drum Tool Kit 15-Piece Service Brake Kit with Spring Pliers Brake Spoons Pad Gauge Brake Spring Tool

  • PROFESSIONAL GRADE AUTOMOTIVE TOOLS: The ABN 15-piece Drum Brake Service Kit is designed to allow you to remove and replace worn and broken brake parts and to make it easier to reach other parts.
  • These rear brake tool sets are designed to be used on most foreign and domestic cars and trucks.
  • SERVICE YOUR VEHICLE BRAKES: Whether you are a seasoned mechanic or a home mechanic, this automotive tool set allows you to service your vehicle brakes by making it easy to replace springs, check your pads, and reach other parts of the drum brake system.
  • EASY TO USE: The spring installer, remover, and retainer tools help to adjust brake springs safely to get to deeper parts of your brake system while the various adjustment spoons help you adjust clearance between the drum brake and brake shoe.
  • The 8 brake lining thickness gauges help you to identify thickness levels to know when its time to change your pads.
  • BUILT TO LAST: Constructed of heavy-duty metal, these brake tools are designed for durability and longevity.
  • Each standard sized brake adjusting tool has a chrome finish to protect from rust and corrosion.
  • The spring puller tool, spring installation tool, and spring retainers have ergonomic handles for comfort when using.
Check Stock

YSTOOL Pneumatic Brake Caliper Piston Wind Back Compression Spreading Tool 23PCS Kit Rewind Spreader Air Tool Set to Repair Brake Pad Change Brake Pump for Cars Trucks

  • Brake caliper tool set comes with a brake compression tool and 22 drive key disc adapters, making it a easy job to push the brake caliper piston back without others' help. YSTOOL pneumatic brake pad caliper tool fits for a variety of domestic and foreign vehicles with windback pistons and push back pistons, performing services on many brake repair jobs like brake pump regulating, brake pads replacement, etc..
  • YSTOOL brake tools are compatible with Ford, Alfa Romeo, Audi, BMW, Citroen, Fiat, Alfa Romeo, Honda, Range Rover, Jetta, Jaguar, Subaru, Mazda, Mercedes, Mitsubishi, Nissan, Renault, Saab, Iveco, Toyota, Volvo, VW, etc. Just choose one adapter, connect the brake piston caliper tool to shop air, press air trigger(til the end) and rotate swivel rod to rewind brake piston, then release pressure before tool removal by pressing air release button..
  • Compared with manual brake caliper spreading tool, pneumatic brake caliper tool is more laborsaving, convenient and environment-friendly. Only one tool is needed to satisfy for use with left and right hand threaded pistons by rotating the long swivel handle freely, no need to gather two sets of left and right hand thrust bolt assemblies and waste time to try which one is right. YSTOOL caliper piston re....
Check Stock

Segomo Tools 360 Degree Swivel Joint Slip Resistant Heavy Duty Brake Pad Spreader Tool | Brake Compression Tool | Brake Pad Tool | Disc Brake Pad Spreader | Brake Caliper Tool - BPST01

  • [ Do The Job Quickly ] This brake pad spreader is ideal for compressing inner brake pads and resetting pistons for fast break pad replacement..
  • [ Comfortable To Use ] Tighten by hand with the built-in easy to turn slip resistant comfortable knob and threaded driver..
  • [ Will Last In Time ] Our brake tool is made from high carbon steel and chrome vanadium mix for added strength and corrosion resistance..
  • [ Be Precise ] 360 degree swivel joint of our brake spreader is designed for even and precise compression force..
  • [ Versatile Use ] Compatible with domestic cars and light trucks and is ideal in tight areas where a C-Clamp won't work. HOW TO USE: 1 - Use your old brake pad in conjunction with this brake pad spreader tool to compress the piston. 2 - Open the brake master cylinder cap before compressing and monitor the fluid level so it does not overflow. 3 - After changing the brake pads, start the vehicle and pump the brakes before driving..
Check Stock

Enhanced TerraKelvin Pinless Moisture Meter for Wood: pinless moisture meter for woodworking Non-invasive Lumber Moisture Meter, Non-Damaging 10-Grade Density Settings for Timber Moisture Meter

  • ✅ Reliable, Efficient and Recommended by Home Inspectors. The moisture measurement is speedy, consecutive with real-time readout. It’s an ideal gadget in your toolbox for Full Home Inspection or 4-Point Inspection, tracking down and alarming any signs of leaks, moisture deterioration, or water-damaged ceilings/walls. Whether you are a home inspector, realtor or home-buyer, TerraKelvin Pinless Moisture meter is definitely the must-have gear in your home inspection tool kit..
  • ✅ High-Precision Lumber Water Content Analyzer for furniture makers, flooring contractors, guitar workshops & luthiers, and DIY Home Renovation projects. Unlike most of pinless moisture meters in market which categorize All materials into 3 variables (Soft, Hard Wood, and Masonry), TerraKelvin has 10-grade wood density setting, and works on all major wood species and drywall, and promise an accuracy of 1%. Built-in automatic temperature compensation function..
  • ✅ Essential Tool for homeowners. With investing and using this high-grade moisture meter, you can regularly quick scan basement, ceilings, drywall, bathroom, and any area with leak stains in minutes. TerraKelvin knows well that an accurate moisture meter can gain insight into moisture buildup and protect your property....
Check Stock

Air Powered Brake Piston Wind Back Tool Pneumatic Brake Caliper Compression Tool Brake Caliper Piston Compressor Rewind Tool Brake Pump Adjusting Tool for Auto Repair

  • Professional Design: Brake caliper compression tool features anti slip knurled handle, exhaust button, pressure plate with rubber sleeve, magnetic head and inlet interface. Made of high carbon steel for durability..
  • Simple Operation: Use the brake compressor on left or right hand thread brake system wheel cylinder piston brake calipers (wind back calipers and some push back single piston calipers) with the 1/4inch air hose adapter to simplify brake jobs..
  • Brake Caliper Piston Tool: Use the ratcheting brake caliper compressor tool to compress pistons quickly and easily into the calipers.
  • Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads..
  • Ratcheting Action: Brake piston compression tool provides 360 degree swing.
  • center located ratchet screw creates an even force when compressing the piston to ensure proper alignment and prevent damage to your brake assembly.
  • reverse movement by flipping the switch on the handle tool to retract the compression plate..
  • Easy Reset: Drain the fluids from calipers then remove the caliper and worn brake pads from your rotor assembly.
  • Retract brake caliper press plates to fit inside the caliper cavity.
  • Begin ratcheting slowly and steadily until the pisto....
Check Stock

Brake Adjustment Tool, Brake Booster Adjustment Tool, Brake Booster Push Rod Adjustment Tool for Adjustable Braking Distance of Brake Pedal, Suit for Most Brake Boosters with Adjustable Pins

  • ...easure the depth of the master cylinder piston bore in order to adjust the length of the booster push rod pin. And two ends of the booster push rod pin adjustment tool are designed with a magnetic inner core, which can be firmly adsorbed on the surface of the master cylinder and booster during use which making your measurement and maintenance process easier.
  • High Quality That Puts Everyone's Mind at Ease - Get master cylinder push rod length gauge that no more worries about quality. Our brake booster adjustment tool kit is made of high-quality aluminum alloys, and the middle push rod is made of 304 stainless steel, and sliver phosphate coating for excellent durability and corrosion resistance for long-lasting use. Choose the best brake adjustment tool for your car and give yourself and your family the best protection.
  • Professional Brake Booster Adjustment Tool- Using a professional brake adjustment tool is responsible for your car. Yoolon master cylinder push rod length gauge suit for most brake boosters with adjustable pins. Such as 1968-76 corvette bendix, corvettes C-3M, 1971 ford F100, 56 chevy booster, frontier 4x4, 96 ford ranger, 65 falcon, 1992 ford F15....
Check Stock

AutoWanderer Tool Brake Caliper Compression Tool, Car Ratcheting Brake Spreader Caliper Pistion Press Tool for Single Twin Quad Piston Disc Brake, Red

  • ...c Brake Caliper Pistion Tool】: Brake piston caliper is equipped with 2 large push plates and 2 brake caliper hooks. The larger plate is fixed in place by built-in powerful magnets and cylindrical pins for easy and quick installation and removal. The hooks suspend the caliper, brake hoses, and other parts for easy inspection of other car components when brake repair..
  • ✔【Easy to Operate】: Brake Pistion press tool adopts 360° ratchet design, which can be used in any direction. Centrally located ratchet evenly spreads force in a parallel manner when compressing pistons to ensure proper alignment and prevent damage to your brake components. The extended handle allows for easy change from spreading to retracting. Flip the switch in the ratchet for positive and negative adjustment. Tips: Both spreader plates need pressure to start the ratchet..
  • ✔【Application】: Our professional brake caliper press suitable for all disc brake caliper press ratchet wheels. Ideal for most large trucks and commercial vehicles. Be used on twin and quad piston fixed calipers, as well as single and twin piston floating calipers. The bigger ones more fit for some sextuplet pistons fixed calipers..
  • ✔【Satisfactory Customer Service】: AutoWanderer Tool specializes in h....
Check Stock

Acymner 24PCS Disc Brake Caliper Tool Kit | Heavy Duty Disc Brake Piston Caliper Compressor Rewind Tool Set for Brake Pad Replacement Reset, Fits Most American European Japanese Autos (Blue)

  • Durable Material: This disc brake caliper tool set is made of 45# carbon steel with rust-proof blasted finish, all components of our brake caliper compression tool are designed for repeated use with high quality materials. Hand thrust bolt has magnetic design to prevent disc adapters from falling off..
  • Easy Operation: The brake caliper tool also includes 2 hand thrust bolt assemblies(right & left). For brake pad and shoe replacement and rotating pistons back into the caliper on your car, truck or 4 wheel drive disc brake vehicles..
  • A Complete Caliper Compression Tool: This brake tool kit includes right and left handed thrust bolts, 2 retaining plates, 18 disc adapters,1 pair of gloves and a convenient carry case for secure storage, meet most of your adaptation needs..
  • Universal Compatibility: The heavy duty brake caliper tool kit includes 18 adapters fitting most of vehicles makes and models including American, European, and Japanese..
  • Storage Case: The brake caliper compression tool is packed in a heavy-duty case with precision-sized compartments for every piece - great for st....
Check Stock