Categories

Best Brake Pedal Booster Check Valve

ABN Pneumatic Vacuum Brake and Clutch Bleeder Kit, 0.75 Liter – Master Cylinder 90–120 PSI Air Pressure Fluid Bleed Tool

  • QUICK BRAKE BLEEDING: The ABN Pneumatic Vacuum Brake and Clutch Bleeder Kit, 0.75 Liter – Master Cylinder 90–120 PSI Air Pressure Fluid Bleed Tool works with your air compressor to quickly bleed those stubborn brake lines.
  • Easier to use and less messy than an inconvenient hand pump.
  • EASY TO USE: Select a fill bottle adaptor for the master cylinder to hold it in place, fill the bottle with fluid, pop it on the master cylinder and open the valve.
  • Once the master cylinder is filled, the bottle flow will stop so you can connect the vacuum jar to an air compressor (not included), connect the bleed hose to the brake bleeder and open bleeder, then pull trigger on jar and lock in place, let it draw for 4-5 minutes, close bleeder, and check brake pedal pressure.
  • ONE-PERSON JOB: Innovative bleeder design allows you to fully complete the job by yourself.
  • WORKS FOR YOUR VEHICLE: For use on motorcycle, car, and truck.
  • 90 to 120 PSI (6-8 bar) air supply requirement.
  • 25-ounce (0.75L) approximate refill container capacity.
  • Includes different adapter sizes to accurately fit your application.
  • CONTENTS: Package includes a brake and clutch bleeder, refill container, and plastic adapters.
Check Stock

jeseny 3 PCS Car Non-Slip Aluminum Alloy Pedal Pads, Manual/Automatic Gearbox Gas Pedal Brake Pedal Cover, Anti-rubbing Car Clutch Pedal Kits, Auto Universal Replacement Accessories (Red)

  • ✔ Package Set: Includes clutch pedal, brake pedal, and gas pedal cover cover, 3 pieces in total. Brake/clutch pedal cover measures 9 x 6.6CM/ 3.54 x 2.59In. Gas pedal cover measures 15.2 x 8.2CM/5.98 x 3.22In..
  • ✔ High Quality Material: The pedal pad cover is made of high quality aluminum alloy and non-slip rubber, the pedal will not be deformed, it increases the pedal contact area and makes it easier for you to manipulate the pedal. The pedal surface is equipped with anti-slip bolts to prevent slippage and keep it tight during long time use..
  • ✔ Safe Driving: With anti-slip surface design for safe driving. The non-slip pedal increases the coefficient of friction between the sole and the pedal to ensure safe driving. Abrasion and corrosion resistant, stay tight for long time use. It provides effective support for your feet and won't slip for moisture. Improves your driving experience and makes your journey safer and more enjoyable..
  • ✔ Applications: Universally applicable to most vehicles, we recommend that you check the size of your car's pedals before you buy to ensure a perfect fit..
Check Stock

Fat Ass on Pink E-Bike

  • ...ective mountain e-bike. 1. Pedal Assist Mode: The motor will assist you with a moderate amount of power as you pedal the bicycle. 2. Fully Electric Mode: Twist the throttle in any increments of power you desire to power the motor of the bicycle. 3. Pedal Mode: Pedal the bicycle normally as you would any bicycle. 4. Booster Mode: The Ebike will travel at 6 km/ h (3.73miles/h), easy to push..
Check Stock

YAKEFLY Car Shift Knob Dust Cover,Car Gear Gaiter Shift Shifter Boot Gear Shift Knob Cover,PU Leather Manual Auto Shifter Shift Boots Cover Gear Stick Gaiter,Fit for Most Car Truck,SUV (Black)

  • ...able aluminum alloy and high quality ABS material. It increases the pedal contact area and makes it easier for you to maneuver the pedals. The surface of the pedal is provided with anti-skid bolts, which can prevent slipping, even if it is used for a long time, it will not wear and deform..
  • 【Universal Size】: The brake/clutch pedal cover measures 9 x 6.6 cm/ 3.54 x 2.59 inches. The accelerator pedal cover measures 15.2 x 8.2 cm / 5.98 x 3.22 inches. Clutch pedal, brake pedal, accelerator pedal cap cover are all included. Universally applicable to most MT vehicles, we recommend that you check the size of your car's pedals before you buy to make sure that nothing is wrong..
  • 【Quick Installation】: You can quickly complete the installation without drilling. There is an installation diagram on the back of the package, and the fixing method is screws and 7-way clips attached to the original pedal. If the pedals are still loose after installation, please check and install again..
  • 【Anti-Slip & More Secure】: When in a rainstorm or snowstorm, the soles of your shoes will inevitably slip because they are wet. Our non-slip pedals increase the coefficient of friction between the sole and the pedal to ensure safe driving. It provides effective support for y....
Check Stock

Brake Adjustment Tool, Brake Booster Adjustment Tool, Brake Booster Push Rod Adjustment Tool for Adjustable Braking Distance of Brake Pedal, Suit for Most Brake Boosters with Adjustable Pins

  • Using Brake Booster Push Rod Adjustment Tool Turned Out to Be So Easy - Yoolon designed a brake booster adjustment tool that works for everyone, even if you don't have the expertise also can use power brake booster pushrod pin adjustment tool quickly and easily. The brake adjustment tool's designed with a magnetic inner core, which can be firmly adsorbed on the surface of the master cylinder and booster during use. Our brake adjustment tool can improve work efficiency and saves time.
  • Brake Adjustment Tool Rejects All Safety Hazards - We designed a new master cylinder push rod length gauge is measure the depth of the master cylinder piston bore in order to adjust the length of the booster push rod pin. And two ends of the booster push rod pin adjustment tool are designed with a magnetic inner core, which can be firmly adsorbed on the surface of the master cylinder and booster during use which making your measurement and maintenance process easier.
  • High Quality That Puts Everyone's Mind at Ease - Get master cylinder push rod length gauge that no more worries about quality. Our brake booster adjustment tool kit is made of high-quality aluminum alloys, an....
Check Stock

ATE 300076 Brake Booster

  • High-quality materials, meticulous workmanship and sophisticated design.
  • Included components: booster, brake pedal extension rod.
Check Stock

Thorstone Pneumatic Brake Fluid Bleeder Tool Kit, 1L Vacuum Brake Oil Change Set with Extractor and Refill Bottle +4 Master Cylinder Adapters + 2 Air Quick Plugs, for Car, Truck, Motorcycle 90-120PSI

  • PNEUMATIC BRAKE OIL BLEEDING TOOL - This brake bleeder kit is good at exchanging brake and clutch fluid by sucking out waste fluid and air,guiding the new oil to fill the whole brake system on motorcycle car truck and pickup..
  • ONE PERSON OPERATION - Brake jobs are some of the most common vehicle maintenance jobs that can be done at home. Refill bottle can be held on the brake fluid reservoir and a hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve. Simple brake bleeder kit one man operation, no need for treading the brake pedal over and again..
  • BRAKE OIL REFILL DEVICE - A long screw fittings on 750ml refill bottle cap with master cylinder adapters to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it..
  • COMPLETE ACCESSORIES - This vacuum brake bleeder kit includes everything you need to quickly and easily remove air from your brakes without creating a mess.
  • 4 master cylinder adapters are suitable for most vehicles (21-30mm, 24-32mm, 28 -37mm, 32-41mm) + 2 air quick plugs + 1.8m long transparent....
Check Stock

Thrustmaster T3PA Add-On (PS5, PS4, XBOX Series X/S, One, PC)

  • 100% metal pedals and internal structure.
  • A component of the TX Racing Wheel ecosystem.
  • also compatible with the Ferrari 458 Spider Racing Wheel.
  • 3 pedals with adjustable spacing setting (3 positions) and adjustable angle setting (2 positions).
  • Accelerator pedal with adjustable height setting (2 positions).
  • Pedals with individual pressure settings: Accelerator pedal-approx. 5.5 lbs..
  • Brake pedal-approx. 22 lbs. (without Conical Rubber Brake Mod).
  • Brake pedal: 33-55 lbs., according to your preference (w/Conical Rubber Brake Mod).
  • Includes optional conical rubber brake mod: Conical stop made from industrial-grade high-density rubber.
  • Realistic sensations, with ultra-progressive resistance at the end of pedal's travel.
  • Wide and perfectly stable: Wide, textured footrest.
  • Built-in threaded holes for cockpit setups.
Check Stock

JEGS Vacuum Reserve Canister | Steel With Chrome FInish | Includes Grommet, One-Way 3/8 “ Check Valve, 1/8 “ NPT x 90 Degree Fitting, And 3/8 “ Barb x 1/8 NPT Port Plug

  • PROVIDES EXTRA VACUUM THAT LARGER CAMSHAFTS CAN’T PROVIDE to properly feed your power brake booster.
  • STEEL WITH CHROME FINISH for great looks and long life.
  • INCLUDES: one grommet, 1 one-way 3/8 “ check valve, one 1/8 “ NPT x 90 degree fitting, and one 3/8 “ barb x 1/8 NPT port plug.
  • OPTIONAL MOUNTING BRACKETS AND VACUUM GAUGE available separately.
Check Stock

Booster Vacuum Hose - Includes Check Valve - Compatible with 2006-2010 Volkswagen Beetle 2.5

  • Compatible with or fits: (Note: w/Check Valve.
  • 2007 - 2008 Volkswagen Beetle | 2006 Volkswagen Beetle 2.5) (2009 - 2010 Volkswagen Beetle).
Check Stock

ECCPP Brake Master Cylinder Fits 1996-2017 for Arctic Cat 1976-2017 for Argo Atv 2002-2009 for ATK 2014 ClubCar 2008-2009 Hammerhead Off-Road 2014-2017 Hisun Motors Corp USA Master Cylinder

  • APPLICATION - Brake Master Cylinder for 1996-2017 for Arctic Cat, 1976-2017 for Argo Atv, 2002-2009 ATK, 2014 ClubCar, 2008-2009 Hammerhead Off-Road, 2014-2017 Hisun Motors Corp USA, 1970-2018 for Honda, 2005-2009 for Husqvarna, 2005-2010 for Hyosung, 1980-2018 for Kawasaki, 1985-2018 for Polaris.
  • EXCELLENT PERFORMANCE - New castings pistons and constructed rubber seals to prevents fluid bypass..
  • CONVERT PRESSURE - Convert the pressure on the brake pedal to hydraulic pressure, which means that the desired braking effect can be achieved with a gentle touch of the brake. bypass. It can convert the pressure on the brake pedal to hydraulic pressure, which means that the desired braking effect can be achieved with a gentle touch of the brake..
  • RELIABLE PRODUCT - Work as original equipment, aftermarket Motorcycle Replacement Brake Master Cylinder. Durable aluminium material for long use..
  • QUALITY GUARANTEE - Check part number and Amazon compatibility chart carefully before place order. We provide ONE YEAR quality guarantee..
Check Stock

KVR Compatible with BMW Pedal Cover, No Drilling Aluminum Pedal Pads for BMW 1 2 3 4 5 6 7 Series X3 X4 X5 X6 X7 Accelerator Gas Brake Pedals,2 PCS (A-Sliver)

  • 【Compatible with Your Car】 KVR BMW brake covers are compatible with 2009-2011 BMW 3 Series (E90/E91/E92), 2011-2014 BMW 5 Series GT (F10/F11/F07), 2012-2014 BMW 6 Series (F06/F12/F13), 2009-2014 BMW 7 Series (F01), 2011-201 2014 BMW X3 (F25). 2014 BMW X4 M40i / xDrive30i, 2010-2013 BMW X5/X5 M (E70), 2021-2022 BMW X5 M50i / xDrive40i / sDrive40i / xDrive45e, 2010-2014 BMW X6/X6 M (E71/E72), 2021-2022 BMW X6 M50i / xDrive40i / sDrive40i, 2021-2022 BMW X7 xDrive40i / M50i..
  • 【High Quality Material】The f30 pedals are made of high quality aluminium alloy and TPE rubber with a brushed surface that never rusts..
  • 【Safe Driving】Aluminium pedals TPE anti-slip rubber strip, filters out sand and water from the bottom of your feet, anti-corrosion and anti-oxidation, waterproof and fireproof, not easily deformed. With prolonged use, it will increase the friction coefficient of the pedal, allowing you to drive more safely..
  • 【Easy to Install】You just remove the factory pedal cover and replace it with this pedals, no drilling or welding required. For installation instructions see product image #6. Please remove the existing rubber cover from the brake pedal and install our metal brake pedal cover and accelerator pedal pad..
Check Stock

Thrustmaster T3PA Wide 3-Pedal Set Xbox One/PC

  • T3PA Wide 3-Pedal Set for TX Racing Wheel Ferrari 458 Italia Edition & Ferrari 458 Spider Racing Wheel.
  • 3 pedals with adjustable spacing settings (3 positions) & adjustable angle setting (2 positions).
  • Accelerator pedal with adjustable height setting (2 positions).
  • Pedals have individual pressure settings: accelerator pedal-approx. 5.5lbs.
  • brake pedal-approx. 22lbs (without Conical Rubber Brake Mod).
  • brake pedal: 33-55lbs, according to preference (with Conical Rubber Brake Mod).
Check Stock