Categories

Best Brake Pedal Wire

NOWIGOT 2pcs,Red Accelerator Gas Pedal Brake No Drilling Pedal Cover Anti-Slip Performance Aluminum Alloy Foot Pads Kit Fit for for Dodge Challenger Charger Chrysler 300 2009-2021

  • ☛Fitment:Gas Brake Pedal cover fits for Dodge Challenger /Dodge Charger / Chrysler 300 2009-2021.(Not fit for SRT&2016 Charger)（Before placing an order, please make sure that the photo is the same.）.
  • ☛High Quality:The Made of high quality aluminum alloy with black anti-slip rubber, Non-slip surface design.NOTE:The original brake pedal rubber pad needs to be removed before installation.Otherwise, the brake pedal cannot be properly installed on our products..
  • ☛Safety Design:Black anti-slip rubber strip, increasing the friction between the soles and pedals, wear-proof and corrosion-proof, improve safe driving..
  • ☛Easy installation:No need tools, please remove the original brake pedal rubber pad after remove, can install brake pedal pad, gas pedal cover don't need to remove. (Note: Remove the factory brake rubber padel cover to add our brake pedal product.).
  • ☛Quality Guarantee:If you're not satisfied with our pedal, simply return it for a full refund in 30 days, no questions asked money back. We will reply within 24 hours and give you a satisfactory answer..
Check Stock

Voilamart 26\ Rear Wheel Electric Bike Conversion Kit, 48V 1500W E-Bike Motor Kit with LCD Display, Built-in Programmable Controller and PAS System, 750W Power Limited for Road Bike

  • 48V 1500W Powerful brushless gearless motor with 34mph (55km/h) speed.
  • Restricted to 750W and 24mph (38km/h) speed by default as a road-legal pedal bike conversion kit..
  • Pedal Assistance System (PAS): enjoy cycling while driving electric bike with 551LB / 250KG Max Load Capacity..
  • LCD display shows battery level and pedal assistance settings.
  • Brake Levers cut off the power supply to the motor safely.
  • Twist throttle has battery level display. Built-in powerful controller guarantee big current supply.
  • Comes with all the components you need to a full conversion, including Rear Wheel(of 7 speed sprocket), Cable Ties & Plastic Coil, Wire Hub, Pedal Assist Crank Sensor, Twist Throttle, One Pair of Brake Handles, LCD Meter, Manual. (Note: Battery not included).
  • 48 Volt electrokinetic cell battery with a nominal capacity not less than 14.5Ah is required..
Check Stock

Dr.Acces EZGO TXT LED Light Kit W/Upgrade Harness | Golf Cart LED Light Kit for EZGO TXT 1996-2013 Gas&Electric

  • Fits on EZGO TXT Golf Cart Gas and Electric 1996 to 2013..
  • LED Head light and LED Taillights with upgrade harness for energy-saving and durability.
  • It comes with All LED for the headlights and taillights with upgrade harness, upgrade harness that allows you to extend to turn signal,horn and brake pedal light etc in futurn, No need to change harness in future and only to buy extra horn and turn signal function, brake pedal ect..
  • The light kit is designed to be used with 12V-DC power only!On 36V electric cars, you can use two of the series connected 6V battery, connecting the positive wire to the positive terminal on one battery and the negative wire to the negative terminal of the other battery. On 48V systems, you must use a voltage reducer. if not, the led light will be burnt out..
  • It comes with detail instruction, it will takes about 2-3 hours to install. Please feel free to contact us for any assistance. you might need Offering warranty, free replacement or refund for any defective accessories..
Check Stock

NEW WILWOOD LONG REVERSE SWING MOUNT CLUTCH OR BRAKE PEDAL ASSEMBLY WITH ADJUSTABLE PEDAL PADS, 6 TO 1 RATIO

  • Brand New Wilwood Long Reverse Swing Mount Clutch Pedal or Brake Pedal with Adjustable Pedal Pads (Wilwood Part # 340-13574)..
  • Wilwood's new Reverse Mount Swing Pedal assembly can be used as a clutch pedal with a single outlet master cylinder or as a brake pedal with a tandem master cylinder..
  • It features all aluminum frame and forged aluminum pedal arms with ladder style construction. ..
  • Features: | Can be used: | * As a Clutch Pedal with a single outlet master cylinder | * As a Brake Pedal with a tandem master cylinder that has a horizontal mounting, when used with a Wilwood Part # 250-3677 (not included with this pedal).
  • Lightweight | * All aluminum frame and forged aluminum pedal arms with ladder-style construction | * New waffle style pedal pads are of special adjustable design that allows fine-tuning of the pedal location and clearance | * Features a 6:1 pedal ratio | * Easy mounting location | * Below you can view and download the instruction booklet for this assembly here..
Check Stock

NEW SOUTHWEST SPEED RACING BRAKE & CLUTCH PEDAL ASSEMBLY WITH MASTER CYLINDERS & BALANCE BAR, REVERSE SWING MOUNT, SHORT 5 TO 1 RATIO

  • Brand New Southwest Speed Short Reverse Swing Mount Brake & Clutch Pedal Combo Kit With 3 Aluminum Master Cylinders (SWS Part # 301-2663). This combo is very similar to the Wilwood Part # 340-4828X3, only about $50 cheaper..
  • Southwest Speed High Volume Aluminum Master Cylinders | * High pressure die-cast from high-grade aluminum, fully machined and assembled with extreme precision * Features the highest fluid capacity of any integral reservoir design * With a total capacity of 8.2 ounces, there is at least 26% more fluid than most competitive brands * More fluid volume means cooler temperatures and additional insurance for extreme conditions where high pad wear can compromise fluid levels during long runs.
  • Kit includes: | * 1 - Reverse swing mount dual pedal, short design, 5:1 ratio (# 301-266) * 1 - Aluminum clutch master cylinder, 3/4" bore (# 301-290) * 1 - Aluminum brake master cylinder, 7/8" bore (# 301-291) * 1 - Aluminum brake master cylinder, 1" bore (# 301-292).
  • Find more Pedals as well as many other high performance auto parts by visiting the Southwest Speed Amazon Store..
  • Southwest Speed Dual Brake and Clutch Pedal | * This pedal assembly combines the brake and clutch pedals together in one unit and positions the master cylinders inside t....
Check Stock

Dorman 20716 Brake Pedal Pad Compatible with Select Toyota Models

  • Direct replacement -this brake pedal pad matches the fit and appearance of the original equipment pedal cover.
  • Durable materials - this pedal cover is designed to withstand wear and tear caused by water, dirt and road salt from the driver's shoe.
  • Easy installation - this pad slides onto the brake pedal and requires no special tools or hardware.
  • Quality tested - this brake pedal pad has undergone validation testing to ensure proper fit for this vehicle's application.
Check Stock

CKE for Toyota Camry 2018-2022, RAV4/ Avalon 2019-2022, Highlander 2020-2022, Sienna/Venza 2021-2022, for Lexus ES/LS 2018-2022 Anti-Slip Foot Pedal Cover Brake and Gas Pedal Pad - Red

  • {Applicable Models} Fit for Toyota Camry LE SE XLE XSE Hybrid Nightshade 2018 2019 2020 2021 2022.(Not fit TRD/V6）, for Toyota RAV4/ Avalon 2019 2020 2021 2022, Highlander 2020 2021 2022, Sienna/ Venza 2021 2022, for Lexus ES/ LS 2018 2019 2020 2021 2022. ( Fit Automatic Transmission only. Please comfirm the car model and the same shape pedal before purchasing. It will not fit other models,not fit sport models and other shape pedal.).
  • {Practical} increase pedal friction, filter sand and water of shoe bottom, driving more safe..
  • {Material} Made of high quality aluminum alloy and non-slip rubber, the pedal will not be deformed for a long time..
  • {Easy to Install} No drilling or welding required, just REMOVE THE FACTORY BRAKE PEDAL COVER, and put our brake pedal cover on it. The gas pedal cover don't need to remove. (Tip: Easy install and non-slip, just remember to REMOVE THE FACTORY BRAKE PEDAL COVER to add our product.) Please look at the product display picture 3..
  • {Packaging} 1x gas pedal cover, 1x brake pedal cover..
Check Stock

Dr.Acces Club Car DS LED Light | LED Headlights & Tail Lights For Club Car DS Gas & Electric golf carts (1993 & up) 12V

  • This LED Light Kit made for Gas and Electric Club Car DS golf carts 1993-up.Not for Club Car Precedent. It's your bare essentials basic lights kit. Please do not buy it if your golf cart has original halogen Light(factory already installed)；.
  • LED Head light and LED Taillights with upgrade harness for energy-saving and durability.
  • It comes with All LED for the headlights and taillights with upgrade harness, upgrade harness that allows you to extend to turn signal,horn and brake pedal light etc in futurn, No need to change harness in future and only to buy extra horn and turn signal function, brake pedal ect；.
  • The light kit is designed to be used with 12V-DC power only!On 36V electric cars, you can use two of the series connected 6V battery, connecting the positive wire to the positive terminal on one battery and the negative wire to the negative terminal of the other battery. On 48V systems, you must use a voltage reducer；.
  • It comes with detail instruction, it will takes about 2-3 hours to install. Please feel free to contact us for any assistance. you might need Offering warranty, free replacement or refund for any defective accessories..
Check Stock

Dorman 20787 Brake Pedal Pad Compatible with Select Models , Black

  • Direct replacement -this brake pedal pad matches the fit and appearance of the original equipment pedal cover.
  • Durable materials - this pedal cover is designed to withstand wear and tear caused by water, dirt and road salt from the driver's shoe.
  • Easy installation - this pad slides onto the brake pedal and requires no special tools or hardware.
  • Quality tested - this brake pedal pad has undergone validation testing to ensure proper fit for this vehicle's application.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Acouto Brake Lever Pedal for Pit Dirt Bike 50cc 110cc 125cc Rear Hydraulic Brake Lever Pedal and Spring Rear Brake Pedal Foot Lever Replacement

  • Fitment---- Brake Lever Pedal is suitable for most Chinese import Pit / Dirt bikes with hydraulic brakes. For use with hydraulic brake systems. The brake pedal lever is produced according to the original 1:1 original version, the key positions are precise and the lines are perfect.
  • Stable Performance---- High level of accuracy and sensitivity, enhance safety of your vehicle. Exquisite workmanship, stable performance and high reliability.
  • Good Replacement---- Easy and quick installation, it can be used with hydraulic brake systems. A direct replacement for the old or broken rear brake pedal foot lever, great match to your vehicle.
  • Professional Manufacturing---- Pit Bike Brake Lever Pedal is based on strict quality control, precise design, standard manufacturing, accurate size, light weight design, stable performance work and improved durability.
  • Quality Assurance---- As a professional seller, high quality products and services have always been what we stick to. Every Lever Pedal has passed the quality inspection before leaving the factory. Please confirm whether the product is suitable before purchasing.
Check Stock

Dorman 20744 Brake Pedal Pad Compatible with Select Acura / Honda Models

  • Direct replacement -this brake pedal pad matches the fit and appearance of the original equipment pedal cover.
  • Durable materials - this pedal cover is designed to withstand wear and tear caused by water, dirt and road salt from the driver's shoe.
  • Easy installation - this pad slides onto the brake pedal and requires no special tools or hardware.
  • Quality tested - this brake pedal pad has undergone validation testing to ensure proper fit for this vehicle's application.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman 20753 Brake Pedal Pad Compatible with Select Ford / Lincoln / Mercury Models

  • Direct replacement -this brake pedal pad matches the fit and appearance of the original equipment pedal cover.
  • Durable materials - this pedal cover is designed to withstand wear and tear caused by water, dirt and road salt from the driver's shoe.
  • Easy installation - this pad slides onto the brake pedal and requires no special tools or hardware.
  • Quality tested - this brake pedal pad has undergone validation testing to ensure proper fit for this vehicle's application.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman 20729 Brake And Clutch Pedal Pad Compatible with Select Ford Models

  • Direct replacement -this brake pedal pad matches the fit and appearance of the original equipment pedal cover.
  • Durable materials - this pedal cover is designed to withstand wear and tear caused by water, dirt and road salt from the driver's shoe.
  • Easy installation - this pad slides onto the brake pedal and requires no special tools or hardware.
  • Quality tested - this brake pedal pad has undergone validation testing to ensure proper fit for this vehicle's application.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock