Categories

Best Brake Piston Kit

21PC Universal Disc Brake Caliper Piston Pad Car Auto Wind Back Hand Tool Kit

  • This tool kit allows you to rewind the pistons in brake calipers by hand without damaging the gaskets in the pistons. It does this by allowing the rotation of the piston at the same time as pushing the piston back into the caliper..
  • This set includes both right and left hand threaded rewind tools 2 pin fixed drives 17 adaptors which fit a variety of modern cars Complete with sturdy blow molded case for storage and ease of transportation.
  • This kit enables the rewinding of pistons back into the core on most disc brake calipers this allows you to service and replace worn brake pads on both wind back and push back type brakes.
  • Color: Gray Dimensions: (13.18 x 2.75 x 9.25)" / (33.5 x 7 x 23.5)cm (L x W x H) Weight: 88.89oz / 2.52kg Quantity: 21 Pcs Adaptable Car: Universal.
  • Package Includes: 1 x 21pcs Disc Brake Caliper Wind Back Tool Kit 1 x User's Manual.
Check Stock

NEW SOUTHWEST SPEED DISC BRAKE KIT, FRONT, 2" DROP SPINDLES,ROTORS, BLACK WILWOOD CALIPERS, COMPATIBLE WITH 55-57 CHEVY, PERFORMANCE BRAKE KIT, PART# 205-2052

  • ...s and vintage rods. They are fully compatible with OE master cylinder output. They provide solid brake capacity and complimentary style with wheel, tire, and suspension upgrades on all types of daily drivers, race vehicles, and ultra-styled show machines..
  • Wilwood's D154 1-Piston Calipers are a lightweight, high-strength, extreme-duty alternative to the OE-style cast iron calipers. Forged billet aluminum bodies, stainless steel pistons, and competition style high-temperature seals put an end to the rust, bore pitting, and seal failures that plague the OE calipers..
  • Kit includes parts for both front wheels: 1.00" Thick x 10.50" o.d. 1-piece rotors/hats 5 x 4.75" Bolt pattern 12mm x 1.5 studs 2" Drop Spindles Strong 4140 steel construction Wilwood D154 1-piston forged aluminum calipers - Black 2.50" piston Wilwood BP-10 smart compound brake pads Caliper slide pin bolts with sleeves Steel braided brake line kit with fittings to connect to calipers and connect to stock hard lines Wheel bearings and races Seals, Washers, Nuts, Cotter Pins, & Dust Caps.
  • Brake Kit is Compatible With The Following Chevy....
Check Stock

WISPAUSU Air Brake Caliper Piston Compression Tool Kit 23PCS Pneumatic Brake Pump Adjusting Wind Back Tool Brake Caliper Piston Rewind Tool

  • Air Brake Caliper Tool - 23PCS Pneumatic Brake Caliper Wind Back Tool Kit, perfect for Brake DIY Enthusiasts or Mechanics. Easy to rewind your brake caliper piston with the Pneumatic Caliper Piston Compressor Tool..
  • Easy to Use - The tool attachs the adapter quickly and firmly by its magnetic plate. Easy to turned the windling handle 360-degree clockwise anticlockwise. Press its button to quick release pressure..
  • What You Get - 1pcs air operated brake compressor tool, 22pcs adapters that fit to the piston, and 1PCS hard plastic suitcase. Made of high carbon-steel..
  • Wide Applications - Adapters compatible with most vehicles, such as Alfa Romeo Audi BMW Citroen Dacia Fiat Ford GM Honda Hyundai Iveco Jaguar Lancia Mazda Mercedes Mini Mitsubishi Nissan Opel Peugeot Renault Saab Seat Skoda Suzuki Toyota Vauxhall Volvo VW, etc..
  • 1 Year Warranty - We offer 1 year after-sales service. Your order will get fast delivery by FBA..
Check Stock

ABN Brake Tool Sets w/ 18 Pc Disc Brake Caliper Tool Kit & 8 Pc Drum Brake Tool Kit – Removal and Installation Tools

  • PROFESSIONAL AUTOMOTIVE TOOLS: The ABN 18-piece Brake Caliper Set and 8-piece Drum Brake Kit is designed to allow you to remove and replace worn and broken brake parts such as bearings, seals, axles, shoes, pistons, springs, pads, calipers, and rotors.
  • Rear brake caliper tools are designed to be used on most foreign and domestic cars and trucks.
  • BRAKE CALIPER WIND BACK TOOL SET: Each piece of the 18-piece brake caliper compressor tool set is constructed of heavy-duty metal for durability and longevity.
  • This set includes a left-handed and right-handed thrust bolt and 15 disc adaptors that are compatible with a wide range of vehicles.
  • All parts in this brake piston compressor tool set are designed to prevent damaging pistons and seals.
  • DRUM BRAKE TOOLS: This 8-piece professional grade brake set includes 3 varying sizes of brake spoons to easily adjust most brake drums and 5 varying brake spring tools to service these drum brakes.
  • Constructed of heavy-duty metal and ergonomic plastic handles, the brake piston compression tool set provides you with the perfect grip and durability for your project.
  • EASY STORAGE: Heavy-duty 14 x 3 x 12.3-inch (35.5 x 7.6 x 31.2 cm) plastic blow-molded carrying case with latches and handle protects these brake kits for easy tr....
Check Stock

ABN Ratcheting Caliper Piston Tool – 4 in 1 Disc Brake Caliper Compression Tool Universal Brake Caliper Spreader Tool

  • BRAKE CALIPER PISTON TOOL: Use the ABN Ratcheting Brake Caliper Compressor Tool to compress pistons quickly and easily into the calipers.
  • Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads.
  • Quad and dual piston brake caliper tool comes pre-lubricated to protect against oxidation.
  • It is suggested to lubricate between uses.
  • 4 IN 1 TOOL FITS YOUR VEHICLE: Disc brake caliper tool set includes 2 sets of piston plates that spread from 1-9/16 to 2-3/8 inches (2.5 to 5.1 cm) to allow plenty of room to install new brake pads.
  • Use as a single piston caliper tool, a dual piston caliper tool, a quad piston caliper tool, and a rear brake caliper tool.
  • This versatile caliper piston compressor tool is ideal for cars, trucks, and some commercial vehicles.
  • Works on both fixed and floating calipers.
  • RATCHETING ACTION: Brake piston compression tool provides a 360-degree swing that allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates.
  • Centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components.
  • Reverse tool movement to retract compression p....
Check Stock

Detroit Axle - SINGLE PISTON CALIPERS 305mm Front and 325mm Rear Drilled and Slotted Disc Brake Kit Rotors w/Ceramic Pads w/Hardware & Brake Kit Cleaner & Fluid

  • For - 2003-2005 Chevrolet Astro - [2001-2006 Chevrolet Silverado 1500 (SINGLE PISTON REAR CALIPERS - 325mm Rear Rotor - 3/4" Thick Rotor)] -....
  • For - 2001-2006 GMC Sierra 1500 (SINGLE PISTON REAR CALIPERS - 325mm Rear Rotor - 3/4" Thick Rotor) - [1999-2000 GMC Sierra 1500] -2000-2001 GMC Yukon....
  • Drilled & Slotted Disc Brake Rotors (Up to 20% Better Braking Power than Standard Rotors ) - Zinc Dichromate Plating (Rust Protection).
  • Authentic 100% Ceramic Brake Pads (With 0% Metallic Composition) - Installation Hardware + 12oz Brake Fluid + 10oz Brake Cleaner Included.
  • Complete Front & Rear Brake kit with 10-Year Warranty.
Check Stock

Air Powered Brake Piston Wind Back Tool Pneumatic Brake Caliper Compression Tool Brake Caliper Piston Compressor Rewind Tool Brake Pump Adjusting Tool for Auto Repair

  • Professional Design: Brake caliper compression tool features anti slip knurled handle, exhaust button, pressure plate with rubber sleeve, magnetic head and inlet interface. Made of high carbon steel for durability..
  • Simple Operation: Use the brake compressor on left or right hand thread brake system wheel cylinder piston brake calipers (wind back calipers and some push back single piston calipers) with the 1/4inch air hose adapter to simplify brake jobs..
  • Brake Caliper Piston Tool: Use the ratcheting brake caliper compressor tool to compress pistons quickly and easily into the calipers.
  • Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads..
  • Ratcheting Action: Brake piston compression tool provides 360 degree swing.
  • center located ratchet screw creates an even force when compressing the piston to ensure proper alignment and prevent damage to your brake assembly.
  • reverse movement by flipping the switch on the handle tool to retract the compression plate..
  • Easy Reset: Drain the fluids from calipers then remove the caliper and worn brake pads from your rotor assembly.
  • Retract brake caliper press plates to fit inside the caliper cavity.
  • Begin ratcheting slowly and steadily until the pisto....
Check Stock

OMT Brake Caliper Wind Back Tool Kit, 24pc Brake Caliper Compression Tool Set with Thrust Bolt Assemblies Retaining Plates Caliper Hangers 18 Disc Adapters, Caliper Tool with Case, Black

  • COMPLETE BRAKE CALIPER TOOL SET: This Orion Motor Tech 24-piece brake piston compressor tool set includes 2 retaining plates, left and right thrust bolt assemblies, 18 disc adapters, 2 brake hangers, and a pair of gloves.
  • keep your tools in the heavy-duty blow molded case for easy storage and transportation.
  • EASY OPERATION: Attach the plate to the handle, select the disc adapter that fits your vehicle and rotate the pistons back into their calipers to clear your pads.
  • embedded magnets in each thrust bolt of this brake tool assembly easily hold your drive keys and adapters in place during use.
  • UNIVERSAL COMPATIBILITY: This disc brake caliper tool set includes a large array of adapters to fit most vehicles, including hundreds of American, Japanese, and European models.
  • see below for a full list of compatible models.
  • DURABLE BUILD: The sandblasted #45 carbon steel construction of our caliper piston tool ensures long lasting performance and corrosion resistance even after years of punishing use.
  • 1 YEAR WARRANTY: Service your brakes today with peace of mind thanks to our caliper piston ....
Check Stock

Cartman 12pc Heavy Duty Disc Brake Caliper Tool Kit Universal Front and Rear Brake Piston Tool Screw-in Wind Back Rewind and Piston Compression Forces or Rotates Pistons into Calipers

  • Caliper Wind Back Disc Brake Pad Piston Compressor Tool.
  • 12pcs kit for brake pad replacement- rotating piston into the caliper for proper fit.
  • Ideal for rotating piston back into caliper and exposing new pads.
  • Constructed for professional mechanics, built to last even through years of service.
  • Come with Brand New in Blow Molded Carrying Case.
Check Stock

HauSun Brake Caliper Press Tool - 360 Degree Car Adjustable Ratchet Piston Spreader Tools Set for Single Twin Quad Piston Disc Brake Repair Replacement

  • 【Main Function】This Brake Caliper Press is professional for automotive brake caliper piston adjustment. Works on single, twin and quad pistons,as well as single and twin piston floating calipers..
  • 【360° Ratchet】Brake Repair Brake Spreading Tools adopts a full 360 degree swing ratchet design so that the spreader may be placed at any position. And your hands will not get fatigued from the constant squeezing..
  • 【Easy to Use】This Brake Caliper Piston Expander is very easy to operate. Swing the long lever handle to expand and retract the two spreading plates, and the positive and negative regulation is realized by flipping the reversing switch on the ratchet..
  • 【Sturdy Material】This Brake Caliper Compressor is constructed of heavy duty carbon steel. The spreading plates with 1/8" thickness steel, high strength, not easy to deform..
  • 【Product Size】This Brake Caliper Press Tool is a must-have tool for doing brake pad replacement, changing the brake, resetting the piston, and doing other brake works .Fully retracted: 1.57”, Fully expanded: 2.72”.
Check Stock

Spurtar Brake Caliper Press Tool Brake Caliper Tool Spreader 4 in 1 Universal Disc Brake Caliper Compression Tool Ratchet Piston Spreader Automotive Tools for Car Brake Repair Installation Blue

  • MULTIFUNCTION 4-1: Spurtar Brake Caliper Compression Tool is ideal for automotive brake pump adjustment. Works on single piston, dual piston and quad piston, as well as single and twin piston floating calipers.
  • RATCHETING: Automotive brake caliper centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components.
  • 360-DEGREE RATCHETING: Ratchet technology of this Brake Caliper Tool provides a 360-degree swing that allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates.
  • EASY TO USE: This caliper piston tool extended reversing lever allows for easy change from spreading to retracting. Cushioned grip handle provides comfortable and easy grip.
  • BUILT TO LAST: Constructed of carbon steel, the ratcheting screw and pad plates are designed for maximum strength and durability, which is an useful brake tools for automotive replacement brake system parts.
Check Stock

BUCKLOS Mountain Bike Disc Brake kit, MTB Mechanical Line Pulling Disc Brakes Caliper with Aluminum Alloy Levers /160mm Rotor,/IS /PM Universal Adapter for Ebike/Folding Bike/Scooter/Fat Bike

  • Complete Braking Device: This bike disc brake kit includes 2 aluminum front and back calipers (brake pads inclued), 2aluminum bicycle brake handle, 2 stainless steel Rotors (160mm), 6 bolts,2 cable, 1 disc Brake Gap Regulator..
  • Quiet Braking :This mountain bike disc brakes use semi metal brake pad, dual piston braking make you easy braking and no noise. ( A set of replacement brake pads is included).
  • Compatible With Bikes: Bucklos disk brake conversation kit suitable for 99% of the MTB bike, like mountain Bike, E-Bike, road CX/Gravel bike, folding bike, Scooter, the diameter handlebar is 22mm/0.87inch.
  • International Dimension: Bicycle disc brake kit is equipped with IS/PM universal adapter, front and rear brakes are compatible with 160mm rotor.
  • Easy To Install : Mtb disc brake set is easy to install, just getting the brakes properly aligned and the right cable tension. If you have any questions for Bucklos disc brakes, please fell free to contact us..
Check Stock

BUCKLOS Mountain Bike Disc Brake kit, MTB Mechanical Line Pulling Disc Brakes Caliper with Aluminum Alloy Levers /160mm Rotor,/IS /PM Universal Adapter for Ebike/Folding Bike/Scooter/Fat Bike

  • Complete Braking Device: This bike disc brake kit includes 2 aluminum front and back calipers (brake pads inclued), 2aluminum bicycle brake handle, 2 stainless steel Rotors (160mm), 6 bolts,2 cable, 1 disc Brake Gap Regulator..
  • Quiet Braking :This mountain bike disc brakes use semi metal brake pad, dual piston braking make you easy braking and no noise. ( A set of replacement brake pads is included).
  • Compatible With Bikes: Bucklos disk brake conversation kit suitable for 99% of the MTB bike, like mountain Bike, E-Bike, road CX/Gravel bike, folding bike, Scooter, the diameter handlebar is 22mm/0.87inch.
  • International Dimension: Bicycle disc brake kit is equipped with IS/PM universal adapter, front and rear brakes are compatible with 160mm rotor.
  • Easy To Install : Mtb disc brake set is easy to install, just getting the brakes properly aligned and the right cable tension. If you have any questions for Bucklos disc brakes, please fell free to contact us..
Check Stock