Categories

Best Brake Piston Resetting Cube

Segomo Tools 360 Degree Swivel Joint Slip Resistant Heavy Duty Brake Pad Spreader Tool | Brake Compression Tool | Brake Pad Tool | Disc Brake Pad Spreader | Brake Caliper Tool - BPST01

  • [ Do The Job Quickly ] This brake pad spreader is ideal for compressing inner brake pads and resetting pistons for fast break pad replacement..
  • [ Comfortable To Use ] Tighten by hand with the built-in easy to turn slip resistant comfortable knob and threaded driver..
  • [ Will Last In Time ] Our brake tool is made from high carbon steel and chrome vanadium mix for added strength and corrosion resistance..
  • [ Be Precise ] 360 degree swivel joint of our brake spreader is designed for even and precise compression force..
  • [ Versatile Use ] Compatible with domestic cars and light trucks and is ideal in tight areas where a C-Clamp won't work. HOW TO USE: 1 - Use your old brake pad in conjunction with this brake pad spreader tool to compress the piston. 2 - Open the brake master cylinder cap before compressing and monitor the fluid level so it does not overflow. 3 - After changing the brake pads, start the vehicle and pump the brakes before driving..
Check Stock

ABN Ratcheting Caliper Piston Tool – 4 in 1 Disc Brake Caliper Compression Tool Universal Brake Caliper Spreader Tool

  • BRAKE CALIPER PISTON TOOL: Use the ABN Ratcheting Brake Caliper Compressor Tool to compress pistons quickly and easily into the calipers.
  • Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads.
  • Quad and dual piston brake caliper tool comes pre-lubricated to protect against oxidation.
  • It is suggested to lubricate between uses.
  • 4 IN 1 TOOL FITS YOUR VEHICLE: Disc brake caliper tool set includes 2 sets of piston plates that spread from 1-9/16 to 2-3/8 inches (2.5 to 5.1 cm) to allow plenty of room to install new brake pads.
  • Use as a single piston caliper tool, a dual piston caliper tool, a quad piston caliper tool, and a rear brake caliper tool.
  • This versatile caliper piston compressor tool is ideal for cars, trucks, and some commercial vehicles.
  • Works on both fixed and floating calipers.
  • RATCHETING ACTION: Brake piston compression tool provides a 360-degree swing that allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates.
  • Centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components.
  • Reverse tool movement to retract compression p....
Check Stock

Air Powered Brake Piston Wind Back Tool Pneumatic Brake Caliper Compression Tool Brake Caliper Piston Compressor Rewind Tool Brake Pump Adjusting Tool for Auto Repair

  • Professional Design: Brake caliper compression tool features anti slip knurled handle, exhaust button, pressure plate with rubber sleeve, magnetic head and inlet interface. Made of high carbon steel for durability..
  • Simple Operation: Use the brake compressor on left or right hand thread brake system wheel cylinder piston brake calipers (wind back calipers and some push back single piston calipers) with the 1/4inch air hose adapter to simplify brake jobs..
  • Brake Caliper Piston Tool: Use the ratcheting brake caliper compressor tool to compress pistons quickly and easily into the calipers.
  • Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads..
  • Ratcheting Action: Brake piston compression tool provides 360 degree swing.
  • center located ratchet screw creates an even force when compressing the piston to ensure proper alignment and prevent damage to your brake assembly.
  • reverse movement by flipping the switch on the handle tool to retract the compression plate..
  • Easy Reset: Drain the fluids from calipers then remove the caliper and worn brake pads from your rotor assembly.
  • Retract brake caliper press plates to fit inside the caliper cavity.
  • Begin ratcheting slowly and steadily until the pisto....
Check Stock

HARDK Disc Brake Pad Spreader Tool - Replace & Install Brake Pads - Tool Compresses Inner Brake Pads and Resets Caliper Pistons - Good for Cars and Light Trucks - Rust Resistant - Easy Use

  • ✅ Replace your pads faster by compressing your inner brake pad and resetting the piston.
  • ✅ Apply maximum torque with this tool's large handle and slip resistant grip.
  • ✅ Heavy-duty construction makes this product highly durable ，Design Includes a Large Knob and Fine Thread Driver.
  • ✅ Light trucks and domestic cars are all compatible with this tool.
  • ✅ High carbon steel and Chrome-Vanadium steel are mixed to create this corrosion resistant tool.
Check Stock

Spurtar Brake Caliper Press Tool Brake Caliper Tool Spreader 4 in 1 Universal Disc Brake Caliper Compression Tool Ratchet Piston Spreader Automotive Tools for Car Brake Repair Installation Blue

  • MULTIFUNCTION 4-1: Spurtar Brake Caliper Compression Tool is ideal for automotive brake pump adjustment. Works on single piston, dual piston and quad piston, as well as single and twin piston floating calipers.
  • RATCHETING: Automotive brake caliper centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components.
  • 360-DEGREE RATCHETING: Ratchet technology of this Brake Caliper Tool provides a 360-degree swing that allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates.
  • EASY TO USE: This caliper piston tool extended reversing lever allows for easy change from spreading to retracting. Cushioned grip handle provides comfortable and easy grip.
  • BUILT TO LAST: Constructed of carbon steel, the ratcheting screw and pad plates are designed for maximum strength and durability, which is an useful brake tools for automotive replacement brake system parts.
Check Stock

JMMRRR Automotive Brake Caliper Press Tool with 2 PCS Steel Plates Ratcheting Caliper Piston Tool with 360 Degree Swing Ratchet Blue

  • 【2 Groups Of Push Boards Wider Application】This brake caliper press tool has 2 sets spreading plates, the bigger ones more fit for some sextuplet pistons fixed calipers, smaller ones are suitable for disc brake system with twin and quad pistons fixed calipers, or single and twin pistons floating calipers, is designed to "push" the piston back, cannot twist and compress at the same time..
  • 【360° Ratcheting Design】Adopts 360 degree ratchet design, it is easy to get into place and use from any direction, the ratchet is in the centre of the dual piston brake caliper compressor, both spreading plates need pressure to start the ratchet, to ensure correct alignment to prevent the piston from being misaligned and damaging the brake components..
  • 【Brake Hook & Reversing Switch】Two caliper hooks to protect the brake fluid lines and calipers provides maximum protection for the brake fluid lines and the brake calipers, there is a small positive and negative regulation switch on the ratchet, you can flip it to realize the conversion of expand and retract spreading plates..
  • 【Comfortable And Durable】This brake....
Check Stock

JMMRRR Automotive Brake Caliper Press Tool with 2 PCS Steel Plates Ratcheting Caliper Piston Tool with 360 Degree Swing Ratchet Red

  • 【2 Groups Of Push Boards Wider Application】This brake caliper press tool has 2 sets spreading plates, the bigger ones more fit for some sextuplet pistons fixed calipers, smaller ones are suitable for disc brake system with twin and quad pistons fixed calipers, or single and twin pistons floating calipers, is designed to "push" the piston back, cannot twist and compress at the same time..
  • 【360° Ratcheting Design】Adopts 360 degree ratchet design, it is easy to get into place and use from any direction, the ratchet is in the centre of the dual piston brake caliper compressor, both spreading plates need pressure to start the ratchet, to ensure correct alignment to prevent the piston from being misaligned and damaging the brake components..
  • 【Brake Hook & Reversing Switch】Two caliper hooks to protect the brake fluid lines and calipers provides maximum protection for the brake fluid lines and the brake calipers, there is a small positive and negative regulation switch on the ratchet, you can flip it to realize the conversion of expand and retract spreading plates..
  • 【Comfortable And Durable】This brake....
Check Stock

OEMTOOLS 27111 Disc Brake Tool Set Front and Rear Brake Piston Tool 11 Adapters Included for Use with Most Cars Forces or Rotates Pistons into Calipers

  • DISC BRAKE CALIPER TOOL SET: This disc brake caliper tool kit assists in the replacement of brake pads on most 4 wheel disc brake vehicles.
  • WORKS WITH MOST CARS: Our OEM brake caliper tool set includes 11 adapters for use on most domestic and imported cars that require clockwise rotations,....
  • QUICKLY FIT BRAKE PADS: The brake piston caliper tool set forces the pistons straight back into the brake calipers and rotates the pistons back into....
  • HEAVY DUTY DISC BRAKE PISTON TOOL: These brake caliper kits are constructed from steel for long-lasting strength and durability.
  • CONVENIENT STORAGE: This front and rear brake caliper tool set comes in a sturdy plastic case for easy storage, organization, and portability, making....
Check Stock

BIGTUR Brake Caliper Press Tool, Car Ratcheting Brake Caliper Piston Spreader Press Tool with 2 pcs Steel Plates/2 pcs Hangers

  • Included: Brake piston calipers equipped with 2 large push plates and 2 brake caliper hooks.The larger plates are held in place by built-in strong magnets and cylindrical pins for quick installation and removal.Hooks can hang calipers, brake tubing, and other parts to facilitate inspection of other car parts while the brakes are being repaired..
  • Easy to use: Ratchet technology gives a full 360° swing so that the spreader may be placed at any position.The extended reversing lever allows for easy change from spreading to retracting. Fully retracted: 1.88”, Fully expanded: 3.03”.
  • High quality:Brake caliper compressor uses high strength spreading plates with 1/6" thickness steel, which is not easy to deform and is durable. The ergonomically designed reinforced handle is efficient, comfortable and non-slip..
  • Wide range of applications: Our professional brake caliper press is suitable for all disc brake caliper press ratchets. Suitable for most large trucks and commercial vehicles. Used for dual-piston and four-piston fixed calipers, and single-piston and double-piston floating calipers.The bigger ones more fit for some sextuplet pistons fixed calipers..
  • Professional after-sales team: All kits are provided with lifetime technical support and one-year limi....
Check Stock

OEMTOOLS 25265 Disc Brake Pad Spreader | Replace & Install Brake Pads | Tool Compresses Inner Brake Pads and Resets Caliper Pistons | Good for Cars and Light Trucks | Rust Resistant | Easy to Use

  • BRAKE PAD REPLACeMENT is a Lot Easier with the OEMTOOLS Disc Brake Pad Spreader - it's Great for Compressing Inner Brake Pads and Resetting Pistons.
  • IT'S IDEAL for Tight Areas Where C-Clamps Won't Work.
  • IT CAN BE USED on Cars and Light Trucks (both Domestic and Import).
  • IT RESISTS CORROSION with its High Carbon Steel and Chrome Vanadium Steel Construction and its 2-Piece Design Provides Added Strength.
  • EASY TO TURN - its Design Includes a Large Knob and Fine Thread DriverDescriptionThis OEMTools Disc Brake Pad Spreader is perfect for compressing inner brake pads and resetting pistons for easy pad replacement! Also, this OEMTools Disc Brake Pad Spreader works great in tight areas where C-Clamps cannot! Constructed from high carbon steel and high quality chrome vanadium steel for strength durability and resistance to corrosion. Large Knob for Easy Turning.
Check Stock

A-Premium Disc Brake Caliper Assembly with Bracket Compatible with Toyota Sienna 2004-2010 Rear Left and Right 2-Pcs Set

  • 【Vehicle Fitment】Compatible with Toyota Sienna 2004-2006(3.3L), 2007-2010(3.5L)---with 4 Wheel Disc Brakes---(Rear Left and Right, Driver and Passenger Side).
  • 【Reference Number】4772228010, 4775028270, 47750-28270, 47722-28010, 19-B2873, 19B2873, 19-P2873, FRC11565C, 4772128020, 47721-28020, 4773028270, 47730-28270, 19-B2873, 19B2873, 19-P2873, FRC11565C.
  • 【Specification】Inlet Port Size: M10 x 1.0.
  • The Brake Calipers are coated with antirust coating, which can effectively prolong the service life..
  • 【Directly Fit】OE Replacement Brand New Brake Caliper Assembly, including Brake Caliper, Bracket, Steel Piston, Installation Hardwares. Please enter your vehicle information in the top left corner of listing and check our "Special Note" before ordering..
  • 【Buy with Confidence】1 Year Unlimited-mileage Quality Guarantee---We extremely value your satisfaction and strive to provide you good shopping exprience. Any further question, please feel free to contact us at any time..
Check Stock

ZTZ MTB MTB Hydraulic Disc Brake Set, Hydraulic Disc Brakes, Left Rear/Right Front, Four-Piston Bicycle Brakes PM/is Adapter Fit for MTB BMX

  • 【Material】 3D Forged 6061 aluminum alloy + 7075 T6 quenched..
  • 【Easy braking】 Mountain bike hydraulic oil brake, dual-piston brake, no matter how fast the speed, how steep the terrain, how wet the environment, gently pull the brake lever to stop immediately..
  • 【Easy to Install】Left Rear, Right Front (installation). Two-way brake. Adjust the brake grip by adjusting the screw to find the right touch. Front and rear brakes are equipped with a conversion seat AB column frame for universal installation is more convenient.Length of front cable: 800mm，Rear cable:1400mm.
  • 【Four Piston】The dual-brake four-piston directly transmits the oil pressure to the brake block to improve the braking efficiency，15% higher braking efficiency than ordinary hydraulic brakes.
  • 【Three-finger brake lever】 The three-finger brake lever is designed according to the human body. The brake is easy to operate, the front and rear, left and right are in line with the usage habits, and the long enough oil pipe can adapt to almost all models..
Check Stock

A-Premium Disc Brake Caliper Assembly Compatible with Chrysler Town Country Voyager Dodge Caravan Grand Caravan 2000-2007 Rear Left or Right Side

  • 【Vehicle Fitment】Compatible with Chrysler Town & Country / Voyager 2000-2007.
  • Dodge Caravan / Grand Caravan 2000-2007 (Rear Left or Right Wheel).
  • 【Specification】Brake Piston Count: 1 Piston.
  • The Brake Calipers are coated with antirust coating, which can effectively prolong the service life..
  • 【Directly Fit】OE Replacement Brand New Brake Caliper Assembly, including Brake Caliper, Phenolic Piston. Please enter your vehicle information in the top left corner of listing and check our "Special Note" before ordering..
  • 【Buy with Confidence】1 Year Unlimited-mileage Quality Guarantee---We extremely value your satisfaction and strive to provide you good shopping exprience. Any further question, please feel free to contact us at any time..
  • 【Reference Number】5019808AA, 5003891AB, 18-4774.
Check Stock