Categories

Best Brake Piston Tool Kit 3pc

Air Powered Brake Piston Wind Back Tool Pneumatic Brake Caliper Compression Tool Brake Caliper Piston Compressor Rewind Tool Brake Pump Adjusting Tool for Auto Repair

  • Professional Design: Brake caliper compression tool features anti slip knurled handle, exhaust button, pressure plate with rubber sleeve, magnetic head and inlet interface. Made of high carbon steel for durability..
  • Simple Operation: Use the brake compressor on left or right hand thread brake system wheel cylinder piston brake calipers (wind back calipers and some push back single piston calipers) with the 1/4inch air hose adapter to simplify brake jobs..
  • Brake Caliper Piston Tool: Use the ratcheting brake caliper compressor tool to compress pistons quickly and easily into the calipers.
  • Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads..
  • Ratcheting Action: Brake piston compression tool provides 360 degree swing.
  • center located ratchet screw creates an even force when compressing the piston to ensure proper alignment and prevent damage to your brake assembly.
  • reverse movement by flipping the switch on the handle tool to retract the compression plate..
  • Easy Reset: Drain the fluids from calipers then remove the caliper and worn brake pads from your rotor assembly.
  • Retract brake caliper press plates to fit inside the caliper cavity.
  • Begin ratcheting slowly and steadily until the pisto....
Check Stock

21PC Universal Disc Brake Caliper Piston Pad Car Auto Wind Back Hand Tool Kit

  • This tool kit allows you to rewind the pistons in brake calipers by hand without damaging the gaskets in the pistons. It does this by allowing the rotation of the piston at the same time as pushing the piston back into the caliper..
  • This set includes both right and left hand threaded rewind tools 2 pin fixed drives 17 adaptors which fit a variety of modern cars Complete with sturdy blow molded case for storage and ease of transportation.
  • This kit enables the rewinding of pistons back into the core on most disc brake calipers this allows you to service and replace worn brake pads on both wind back and push back type brakes.
  • Color: Gray Dimensions: (13.18 x 2.75 x 9.25)" / (33.5 x 7 x 23.5)cm (L x W x H) Weight: 88.89oz / 2.52kg Quantity: 21 Pcs Adaptable Car: Universal.
  • Package Includes: 1 x 21pcs Disc Brake Caliper Wind Back Tool Kit 1 x User's Manual.
Check Stock

ABN Brake Tool Sets w/ 18 Pc Disc Brake Caliper Tool Kit & 8 Pc Drum Brake Tool Kit – Removal and Installation Tools

  • PROFESSIONAL AUTOMOTIVE TOOLS: The ABN 18-piece Brake Caliper Set and 8-piece Drum Brake Kit is designed to allow you to remove and replace worn and broken brake parts such as bearings, seals, axles, shoes, pistons, springs, pads, calipers, and rotors.
  • Rear brake caliper tools are designed to be used on most foreign and domestic cars and trucks.
  • BRAKE CALIPER WIND BACK TOOL SET: Each piece of the 18-piece brake caliper compressor tool set is constructed of heavy-duty metal for durability and longevity.
  • This set includes a left-handed and right-handed thrust bolt and 15 disc adaptors that are compatible with a wide range of vehicles.
  • All parts in this brake piston compressor tool set are designed to prevent damaging pistons and seals.
  • DRUM BRAKE TOOLS: This 8-piece professional grade brake set includes 3 varying sizes of brake spoons to easily adjust most brake drums and 5 varying brake spring tools to service these drum brakes.
  • Constructed of heavy-duty metal and ergonomic plastic handles, the brake piston compression tool set provides you with the perfect grip and durability for your project.
  • EASY STORAGE: Heavy-duty 14 x 3 x 12.3-inch (35.5 x 7.6 x 31.2 cm) plastic blow-molded carrying case with latches and handle protects these brake kits for easy tr....
Check Stock

OMT Brake Caliper Wind Back Tool Kit, 24pc Brake Caliper Compression Tool Set with Thrust Bolt Assemblies Retaining Plates Caliper Hangers 18 Disc Adapters, Caliper Tool with Case, Black

  • COMPLETE BRAKE CALIPER TOOL SET: This Orion Motor Tech 24-piece brake piston compressor tool set includes 2 retaining plates, left and right thrust bolt assemblies, 18 disc adapters, 2 brake hangers, and a pair of gloves.
  • keep your tools in the heavy-duty blow molded case for easy storage and transportation.
  • EASY OPERATION: Attach the plate to the handle, select the disc adapter that fits your vehicle and rotate the pistons back into their calipers to clear your pads.
  • embedded magnets in each thrust bolt of this brake tool assembly easily hold your drive keys and adapters in place during use.
  • UNIVERSAL COMPATIBILITY: This disc brake caliper tool set includes a large array of adapters to fit most vehicles, including hundreds of American, Japanese, and European models.
  • see below for a full list of compatible models.
  • DURABLE BUILD: The sandblasted #45 carbon steel construction of our caliper piston tool ensures long lasting performance and corrosion resistance even after years of punishing use.
  • 1 YEAR WARRANTY: Service your brakes today with peace of mind thanks to our caliper piston ....
Check Stock

JMMRRR Automotive Brake Caliper Press Tool with 2 PCS Steel Plates Ratcheting Caliper Piston Tool with 360 Degree Swing Ratchet Blue

  • 【2 Groups Of Push Boards Wider Application】This brake caliper press tool has 2 sets spreading plates, the bigger ones more fit for some sextuplet pistons fixed calipers, smaller ones are suitable for disc brake system with twin and quad pistons fixed calipers, or single and twin pistons floating calipers, is designed to "push" the piston back, cannot twist and compress at the same time..
  • 【360° Ratcheting Design】Adopts 360 degree ratchet design, it is easy to get into place and use from any direction, the ratchet is in the centre of the dual piston brake caliper compressor, both spreading plates need pressure to start the ratchet, to ensure correct alignment to prevent the piston from being misaligned and damaging the brake components..
  • 【Brake Hook & Reversing Switch】Two caliper hooks to protect the brake fluid lines and calipers provides maximum protection for the brake fluid lines and the brake calipers, there is a small positive and negative regulation switch on the ratchet, you can flip it to realize the conversion of expand and retract spreading plates..
  • 【Comfortable And Durable】This brake....
Check Stock

JMMRRR Automotive Brake Caliper Press Tool with 2 PCS Steel Plates Ratcheting Caliper Piston Tool with 360 Degree Swing Ratchet Red

  • 【2 Groups Of Push Boards Wider Application】This brake caliper press tool has 2 sets spreading plates, the bigger ones more fit for some sextuplet pistons fixed calipers, smaller ones are suitable for disc brake system with twin and quad pistons fixed calipers, or single and twin pistons floating calipers, is designed to "push" the piston back, cannot twist and compress at the same time..
  • 【360° Ratcheting Design】Adopts 360 degree ratchet design, it is easy to get into place and use from any direction, the ratchet is in the centre of the dual piston brake caliper compressor, both spreading plates need pressure to start the ratchet, to ensure correct alignment to prevent the piston from being misaligned and damaging the brake components..
  • 【Brake Hook & Reversing Switch】Two caliper hooks to protect the brake fluid lines and calipers provides maximum protection for the brake fluid lines and the brake calipers, there is a small positive and negative regulation switch on the ratchet, you can flip it to realize the conversion of expand and retract spreading plates..
  • 【Comfortable And Durable】This brake....
Check Stock

YSTOOL Pneumatic Brake Caliper Piston Wind Back Compression Spreading Tool 23PCS Kit Rewind Spreader Air Tool Set to Repair Brake Pad Change Brake Pump for Cars Trucks

  • Brake caliper tool set comes with a brake compression tool and 22 drive key disc adapters, making it a easy job to push the brake caliper piston back without others' help. YSTOOL pneumatic brake pad caliper tool fits for a variety of domestic and foreign vehicles with windback pistons and push back pistons, performing services on many brake repair jobs like brake pump regulating, brake pads replacement, etc..
  • YSTOOL brake tools are compatible with Ford, Alfa Romeo, Audi, BMW, Citroen, Fiat, Alfa Romeo, Honda, Range Rover, Jetta, Jaguar, Subaru, Mazda, Mercedes, Mitsubishi, Nissan, Renault, Saab, Iveco, Toyota, Volvo, VW, etc. Just choose one adapter, connect the brake piston caliper tool to shop air, press air trigger(til the end) and rotate swivel rod to rewind brake piston, then release pressure before tool removal by pressing air release button..
  • Compared with manual brake caliper spreading tool, pneumatic brake caliper tool is more laborsaving, convenient and environment-friendly. Only one tool is needed to satisfy for use with left and right hand threaded pistons by rotating the long swivel handle freely, no need to gather two sets of left and right hand thrust bolt assemblies and waste time to try which one is right. YSTOOL caliper piston re....
Check Stock

Spurtar Brake Caliper Press Tool Brake Caliper Tool Spreader 4 in 1 Universal Disc Brake Caliper Compression Tool Ratchet Piston Spreader Automotive Tools for Car Brake Repair Installation Blue

  • MULTIFUNCTION 4-1: Spurtar Brake Caliper Compression Tool is ideal for automotive brake pump adjustment. Works on single piston, dual piston and quad piston, as well as single and twin piston floating calipers.
  • RATCHETING: Automotive brake caliper centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components.
  • 360-DEGREE RATCHETING: Ratchet technology of this Brake Caliper Tool provides a 360-degree swing that allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates.
  • EASY TO USE: This caliper piston tool extended reversing lever allows for easy change from spreading to retracting. Cushioned grip handle provides comfortable and easy grip.
  • BUILT TO LAST: Constructed of carbon steel, the ratcheting screw and pad plates are designed for maximum strength and durability, which is an useful brake tools for automotive replacement brake system parts.
Check Stock

HauSun Brake Caliper Press Tool - 360 Degree Car Adjustable Ratchet Piston Spreader Tools Set for Single Twin Quad Piston Disc Brake Repair Replacement

  • 【Main Function】This Brake Caliper Press is professional for automotive brake caliper piston adjustment. Works on single, twin and quad pistons,as well as single and twin piston floating calipers..
  • 【360° Ratchet】Brake Repair Brake Spreading Tools adopts a full 360 degree swing ratchet design so that the spreader may be placed at any position. And your hands will not get fatigued from the constant squeezing..
  • 【Easy to Use】This Brake Caliper Piston Expander is very easy to operate. Swing the long lever handle to expand and retract the two spreading plates, and the positive and negative regulation is realized by flipping the reversing switch on the ratchet..
  • 【Sturdy Material】This Brake Caliper Compressor is constructed of heavy duty carbon steel. The spreading plates with 1/8" thickness steel, high strength, not easy to deform..
  • 【Product Size】This Brake Caliper Press Tool is a must-have tool for doing brake pad replacement, changing the brake, resetting the piston, and doing other brake works .Fully retracted: 1.57”, Fully expanded: 2.72”.
Check Stock

Brake Caliper Compression Tool, Pneumatic Brake Caliper Tool with 2 Caliper Hangers, 25pc Brake Caliper Wind Back Tool Professional Brake Tool Set Fits American, European, Japanese Autos

  • 25-PIECE SET: This Orion Motor Tech pneumatic caliper piston compressor tool includes an air-powered compressor, 22 disc adapters, 2 brake hangers and a pair of gloves to easily, quickly, and securely finish the job.
  • keep your tools in the heavy-duty blow-molded case for easy organization, storage, and transportation between jobs.
  • EASY OPERATION: Choose the drive key you need and attach it to the piston wind back tool's magnetic pad, then connect the tool to your brake's airline, press the release button, and turn the rotating lever clockwise or anticlockwise to effortlessly repair or readjust your brakes.
  • UNIVERSAL COMPATIBILITY: This brake caliper set includes a large array of adapters to fit most vehicles, including hundreds of American, Japanese, and European models.
  • See below for a full list of compatible models.
  • BUILT TO LAST: The high quality brake piston compression tool's blackened aluminum-alloy body and sandblasted #45 carbon steel adapters steel disc adapters ensure long-lasting performance and corrosion resistance.
  • 1 YEAR WARRANTY: Service your brakes today with your peace of mind assured by our brake piston compression tool's strong 1 year warranty and Orion Motor Tech's usual friendly customer service.
Check Stock

Cartman 12pc Heavy Duty Disc Brake Caliper Tool Kit Universal Front and Rear Brake Piston Tool Screw-in Wind Back Rewind and Piston Compression Forces or Rotates Pistons into Calipers

  • Caliper Wind Back Disc Brake Pad Piston Compressor Tool.
  • 12pcs kit for brake pad replacement- rotating piston into the caliper for proper fit.
  • Ideal for rotating piston back into caliper and exposing new pads.
  • Constructed for professional mechanics, built to last even through years of service.
  • Come with Brand New in Blow Molded Carrying Case.
Check Stock

(3)877-323 Aftermarket Piston Driver &(1) 883-511 Piston Bumper Kit - for Hitachi NR83A, NR83A2, NR83A2(S) Air Nailer - Framing Nailers 885915, 877323, SP 877-323, SP 885-915 878-303 Piston Assembly …

  • 877-323 883-511 Aftermarket Piston Driver.Framing Nailer (885-915, 877-323) - 877-323,Heat treated tool steel 6150 - Rockwell hardness 50-52,Aerospace grade #2024 Aluminum piston.partes para pistola hitachi roofing framing placa de cilindro nr832 nr65ak2 nv45ab2.
  • 877-323 Piston Driver: Aluminum is crimped into the unilok grooves of the shaft to prevent unscrewing. Hardened steel lock tite and micro-mechanically locked piston driver interface. Guaranteed never to unscrew.hitachi nail gun parts original.
  • 878-303 Piston Bumper: Precision machined, high density yellow color plastic framer bumper..
  • Driver & Bumper Kit - Pack of 4 which includes 3pc 877-323 piston driver & 1pc 878-303 piston bumper..
  • ☎AFTER-SALE GUARANTEE: - You decide you are not satisfied, you can request a replacement or a full refund, no questions! Refund is void if you have installed, used or damaged the item in any way. Item must be returned with its original box, packing materials .If you have any problems please kindly contact us by logging in your Amazon Buyer Account > Click Your Account > your ....
Check Stock

2" DROP SUSPENSION & WILWOOD 4 PISTON BRAKE SET FOR 55-57 CHEVY, CURRIE REAR END, AXLES, 9" FORD POSI-TRAC 3RD MEMBER, RED CALIPERS, 12" ROTORS SPINDLES MASTER CYLINDER BOOSTER CONTROL ARMS

  • Brand New Suspension & 12" Wilwood Brake Kit For 1955-1957 Chevys with 2" Drop Spindles (Part # GMB5557X-K72). This specific set features 2" drop spindles, Rotors, and Red Dynalite 4 piston front calipers & Red Dynalite 4 piston rear calipers. Fits: 1955-1957 Chevrolet Bel Air, Delray, 150, & 210. Excludes All Station Wagons, Sedan Deliveries, and Nomads due to their Bowtie shaped gas tank that requires a centered housing rear end, as opposed to a centered pinion rear end..
  • Includes: *Currie 9-Plus Notch-Back rear end with 31 spline axles (#CE-GMB5557X): Currie crate rear ends are designed to be a bolt-in upgrade. Built to the stock 60” width & pinion specs. Heavy-duty 2" wide leaf spring pads are installed in the stock location for easy bolt-in installation *Southwest Speed 9" Ford Rear End Third Member With Posi Trac-Loc (#603-2078): This kit comes with a 3.70 ratio gear, which is a good cruising ratio. We have ratios from 3.50 to 5.00 that can be substituted in.
  • *Southwest Speed 2" Drop Spindles (SWS Part # 103-9760): SWS drop spindles provide a full 2" drop, while not changing the vehicle's steering geome....
Check Stock