Categories

Best Brake Press

Mastercool 43050 Air Powered Brake Caliper Wind Back Tool Kit, 1 Pack

  • PNEUMATIC SINGLE PISTON PRESS SHAFT OPERATION allows one technician to perform the brake job quickly and efficiently.
  • RIGHT OR LEFT HAND WIND-BACK OPERATION for rear brake caliper pistons.
  • 15 PIECE ADAPTER SET allows for a large range of single piston brake calipers including GM, Honda, AUDI, FIAT, ALFA ROMEO, FORD, ISUZU, JAGUAR, BMW, MERCEDES BENZ, MITSUBISHI, TOYOTA, VOLVO, MAZDA, SAAB, NISSAN VW, SUBARU and more.
  • O-RING PROTECTED SHAFT to maintain proper pressure.
Check Stock

JMMRRR Automotive Brake Caliper Press Tool with 2 PCS Steel Plates Ratcheting Caliper Piston Tool with 360 Degree Swing Ratchet Blue

  • 【2 Groups Of Push Boards Wider Application】This brake caliper press tool has 2 sets spreading plates, the bigger ones more fit for some sextuplet pistons fixed calipers, smaller ones are suitable for disc brake system with twin and quad pistons fixed calipers, or single and twin pistons floating calipers, is designed to "push" the piston back, cannot twist and compress at the same time..
  • 【360° Ratcheting Design】Adopts 360 degree ratchet design, it is easy to get into place and use from any direction, the ratchet is in the centre of the dual piston brake caliper compressor, both spreading plates need pressure to start the ratchet, to ensure correct alignment to prevent the piston from being misaligned and damaging the brake components..
  • 【Brake Hook & Reversing Switch】Two caliper hooks to protect the brake fluid lines and calipers provides maximum protection for the brake fluid lines and the brake calipers, there is a small positive and negative regulation switch on the ratchet, you can flip it to realize the conversion of expand and retract spreading plates..
  • 【Comfortable And Durable】This brake....
Check Stock

JMMRRR Automotive Brake Caliper Press Tool with 2 PCS Steel Plates Ratcheting Caliper Piston Tool with 360 Degree Swing Ratchet Red

  • 【2 Groups Of Push Boards Wider Application】This brake caliper press tool has 2 sets spreading plates, the bigger ones more fit for some sextuplet pistons fixed calipers, smaller ones are suitable for disc brake system with twin and quad pistons fixed calipers, or single and twin pistons floating calipers, is designed to "push" the piston back, cannot twist and compress at the same time..
  • 【360° Ratcheting Design】Adopts 360 degree ratchet design, it is easy to get into place and use from any direction, the ratchet is in the centre of the dual piston brake caliper compressor, both spreading plates need pressure to start the ratchet, to ensure correct alignment to prevent the piston from being misaligned and damaging the brake components..
  • 【Brake Hook & Reversing Switch】Two caliper hooks to protect the brake fluid lines and calipers provides maximum protection for the brake fluid lines and the brake calipers, there is a small positive and negative regulation switch on the ratchet, you can flip it to realize the conversion of expand and retract spreading plates..
  • 【Comfortable And Durable】This brake....
Check Stock

EWK Brake Caliper Press Tool Piston Spreader Pad 360 Degree Swing Ratchet with 2 Pcs Steel Plates

  • 【 Versatile Tool 】 EWK brake caliper press tool comes with two pairs of press plates: 4.53x2.24 inches and 5.79x3.36 inches. Ideal for most large trucks and commercial vehicles with single, double, and four side pistons brake caliper..
  • 【 Time & Effort Saver 】 360-degree swing design makes the brake caliper compression tool easy to insert into the caliper and use from any direction..
  • 【Easy to Use】 Centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components..
  • 【 Ratcheting Design 】 Because of the ratcheting mechanism, you will need to apply some pressure to squeeze the spreaders inward, then you are able to spread the brake tool to fit into your caliper. Fully retract: 1.59”.
  • 【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 months warranty. If there is any problem or concern with our products, please contact us for assistance..
Check Stock

Lang Tools 277 Brake Caliper Press

  • 【Fit for Disc Brake】 The brake caliper press tool is equipped with two groups of push boards: 7.01x2.36 inches and 4.53x2.17 inches, Suitable for....
  • 【Working Principle】The spreader can spreading to push the boards or retracting when finished it. (Ajust by the switch). In expanded mode, the....
  • 【How to use】Make the push boards both sides Centralized Alignment the pistons, let both sides of the push boards be forced at the same time (press....
  • 【Size Reference】Two groups of push boards size: 7.01x2.36 inches and 4.53x2.17 inches.
  • Telescopic range: fully retracted: 1.88”, fully expanded:....
  • Two-Year Customer Service for Five Bananas Brake Caliper Tool. Pls email us first when you have any problem, we promise will provide the best....
Check Stock

THOROAD Brake Caliper Press Tool, Brake Caliper Compression Tool,Car Ratcheting Brake Caliper Piston Spreader Press Tool with 2 pcs Steel Plates (Red)

  • 【】THOROAD Brake Caliper Press Tool uses high quality spreading plates with 1/8" thickness steel,corrosion resistance, economical and practical, with long service life. The ratchet brake piston is equipped with 2 additional steel plates. The bigger spreading plates with build-in small magnets and cylindrical pins, can install and unload quickly and easily from the compressor..
  • 【】THOROAD Brake repair brake spreading tool adopts 360 degree ratchet design, it is easy to get into place and use from any direction, also your hands will not get fatigued from the constant squeezing. Ratchet technology provides 360 degree full rotation so that the spreader can be placed in any position. The centering ratchet screw produces a uniform force as it compresses the piston to ensure proper alignment and prevent damage to the brake assembly..
  • 【 】THOROAD brake caliper compression tool ideal for most large trucks and commercial vehicles with quad piston calipers.Easy to install, easy to remove. Ratchet technology gives a full 360-degree swing so that the spreader may be placed at any position.Suits for disc brake, NOT for drum brake..
Check Stock

DASBET 4 in1 Ball Joint Service Auto Tool Kit 2WD & 4WD Car Repair Remover Installer

  • Function: The ball joint press removal tool with four wheel drive adapter allows easy removal of crimped parts including ball joints, universal joints, brake fixing pins, etc. You don't need to remove the control arm from the vehicle at all during operation, improving work efficiency..
  • Durable Structure: The ball point press kit is made of heavy forged steel with black oxide finish adapters.The ball joint service auto tool kit has great strength and service life, while rust and corrosion resistant.And the ball joint separator tool can withstand long-term and massive use..
  • Easy to Operate: The ball joint service auto tool kit is ideal for removing/installing vehicle parts. You can remove all lock ring retainers from the brake anchor pins, then place the C-frame press on the brake spider, and tighten the forcing screws until the mounting pins are removed. .
  • Wide Compatibility: The ball joint press & U joint removal tool kit is suitable for most two wheel drive (2WD) and four whee....
Check Stock

BIGTUR Brake Caliper Press Tool, Car Ratcheting Brake Caliper Piston Spreader Press Tool with 2 pcs Steel Plates/2 pcs Hangers

  • Included: Brake piston calipers equipped with 2 large push plates and 2 brake caliper hooks.The larger plates are held in place by built-in strong magnets and cylindrical pins for quick installation and removal.Hooks can hang calipers, brake tubing, and other parts to facilitate inspection of other car parts while the brakes are being repaired..
  • Easy to use: Ratchet technology gives a full 360° swing so that the spreader may be placed at any position.The extended reversing lever allows for easy change from spreading to retracting. Fully retracted: 1.88”, Fully expanded: 3.03”.
  • High quality:Brake caliper compressor uses high strength spreading plates with 1/6" thickness steel, which is not easy to deform and is durable. The ergonomically designed reinforced handle is efficient, comfortable and non-slip..
  • Wide range of applications: Our professional brake caliper press is suitable for all disc brake caliper press ratchets. Suitable for most large trucks and commercial vehicles. Used for dual-piston and four-piston fixed calipers, and single-piston and double-piston floating calipers.The bigger ones more fit for some sextuplet pistons fixed calipers..
  • Professional after-sales team: All kits are provided with lifetime technical support and one-year limi....
Check Stock

ABN Caliper Piston Compressor Tool 16-pc Pneumatic Brake Caliper Tool Air Brake Tools Brake Caliper Compressor Tool

  • MAKE BRAKE JOBS EASY: Use the ABN Brake Compressor on left or right hand thread brake system wheel cylinder piston brake calipers (wind back calipers and some push back single piston calipers) with the 1/4-inch air hose adapter to simplify brake jobs.
  • Choose an adapter, connect your existing shop air line, press pressure button and rotating lever to wind back brake piston, press release button, and pull rotating lever to move push piston axle backwards for dismounting tool caliper.
  • FITS YOUR VEHICLE: Drive key adapters for GM, Citroen XM & Zantia, Citroen CXM, Citroen C5, Alfa Romeo, Alfa Romeo 164 2.0 Saab 9000, Audi, Audi 80/90 & V8, BMW, Ford, Honda, Honda Prelude Isuzu, Jaguar, Jaguar XI40, Mercedes, Mitsubishi, Nissan, Nissan Bluebird, Nissan Silvia, Nissan Maxima Rover, Toyota, Toyota Celica & Corolla GR & MR2, Volkswagen (VW), VW Golf/Pas-Sat Corrado/GTX 16V/Scirroco, Volvo, Mazda 323.626, Primera 2.0L VW Golf IV, Rover 800, Subaru L & 2 Series, Opel, Ford Mondeo.
  • BUILT TO LAST: Pneumatic body constructed from solid heat-treated cast anodized aluminum.
  • Moving parts constructed from chrome alloy steel (chrome finished rotating lever, phosphate finished holder, and anodized aluminum handle).
  • Each adapter is permanently etched with size for quick i....
Check Stock

Air Powered Brake Piston Wind Back Tool Pneumatic Brake Caliper Compression Tool Brake Caliper Piston Compressor Rewind Tool Brake Pump Adjusting Tool for Auto Repair

  • Professional Design: Brake caliper compression tool features anti slip knurled handle, exhaust button, pressure plate with rubber sleeve, magnetic head and inlet interface. Made of high carbon steel for durability..
  • Simple Operation: Use the brake compressor on left or right hand thread brake system wheel cylinder piston brake calipers (wind back calipers and some push back single piston calipers) with the 1/4inch air hose adapter to simplify brake jobs..
  • Brake Caliper Piston Tool: Use the ratcheting brake caliper compressor tool to compress pistons quickly and easily into the calipers.
  • Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads..
  • Ratcheting Action: Brake piston compression tool provides 360 degree swing.
  • center located ratchet screw creates an even force when compressing the piston to ensure proper alignment and prevent damage to your brake assembly.
  • reverse movement by flipping the switch on the handle tool to retract the compression plate..
  • Easy Reset: Drain the fluids from calipers then remove the caliper and worn brake pads from your rotor assembly.
  • Retract brake caliper press plates to fit inside the caliper cavity.
  • Begin ratcheting slowly and steadily until the pisto....
Check Stock

CaddyTek EZ-Fold 3 Wheel Golf Push Cart, Red

  • Patented One-Click button folds the cart in 2 simple steps to compact size(13.2"W x 12.4"L x 32.8"H).
  • Strong aluminum frame, weighs less than 18.5 lbs..
  • Patented press to brake, press again to release foot brake.
  • Three 11.5" x 2.6" EVA maintenance-free wheels provides perfect balance and traction on all types of terrain.
  • Patented basket with cooler build in, Mesh net on the handle, Umbrella holder and storage rack included.
Check Stock

SWAG Off Road 50\ Press Brake DIY Builder Kit With Adjustable Back Stop.

  • Press Brake Kit comes Unassembled, you do the final assembly and welding..
  • Constructed out of high strength 3/8" steel with a 1.0" x 4.0" thick top die and 3.0" wide bottom die..
  • This universal press brake kit will bend steel up to 49" wide..
  • Designed to fit in hydraulic presses that are at least 52" wide, but can easily be cut down..
Check Stock

LAJIAOZ Stainless Steel Car Brake Caliper Press Tool,Compressor Brake Wrench Can 360 Degree Ratchet Swing for Car Brake Repair and Replace

  • ★Function:this car brake caliper press tool has a wide range of uses,suitable for most automotive,it is also suitable for single piston and double piston floating calipers, please check your brake caliper size first before purchasing..
  • ★Design:the piston spreader tool is designed to 360 degrees swing , so the spreader can be placed any position and the tool can be used from any direction, thickened and reinforced pad and comfortable handle.
  • ★Material:the ratchet brake pad spreader is made of stainless steel,high strength and durable and the handle is made of rubber, which is very comfortable to grasp.
  • ★Size:The brake caliper press tool total length is about 10.7''/271mm, the retraction supports about 1.3''/33mm, and the spread supports about 2.52 ''/64mm,see the picture for detai.
  • ★We are specialized in producing various tools, please go find all kinds of tools fittings you need in LAJIAOZ store .Customer satisfaction is our top priority,if there anything missed or broken,pls let us know,we'll reply within 24 hours.
Check Stock