Categories

Best Brake Vacuum Fitting Cap

Hromee Fuel Pump and Vacuum Tester Gauge Carburetor Pressure Diagnostics Leakage Tool Kit

  • HOSE AND ACCESSORIES - The kit comes with a 2ft/61cm rubber hose (13/64-inch ID and 23/64-inch OD). The max working pressure is 40PSI. Other accessories include (1)conical adapter, (1)plastic connector, (1) 1/4”x18 male to 1/8”-27 female adapter, (1)1/8”-27 male to 7/32”barbed fitting adapter, (1)1/8”-27 female to 3/8”male adapter, (1)T-type 7/32”barded fitting adapter..
  • EASY STORAGE - Heavy-duty 11”x 5.7”x 2.4”inch (28cm x 14.5cm x 6cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization..
Check Stock

UTSAUTO 30 Pack Brake Bleeder Rubber Caps 7mm-8mm Dust Cover Brake Bleed Nipple Cap for Cars and Motorcycles

  • ...s with keeper is about 1.2 cm/ 0.5 inch in outer diameter, about 0.6 cm/ 0.24 inch in inner diameter, and the ring is about 1 cm/ 0.4 inch in diameter, proper for most cars and motorcycles to use.
  • Please check the size details before you place the order.
  • Reliable and Serviceable: made of quality rubber, these grease fitting caps have nice softness and sealing, are stable in structure, not easy to break or fade, in exquisite workmanship, can serve you for a long time.
  • Keep Away Dust and Moisture: these brake bleeder screw caps can cover the vent screws, keeping dirt or rainwater away from the screws, the inner rib design makes it easy to fix stably and fasten tightly, and the brake bleeder screw cap with keeper comes with an anti-shedding ring, hard to fall off or be lost.
  • They are nice helpers for your cars and motorcycles.
  • Easy to Use: these bleeder valve caps are packaged in a plastic box, easy for you to manage and store, light in weight and portable, will not occupy much space, you can easily put them in your trunk or tool case.
Check Stock

ANRIWT Air Brake Line Fittings,1/4" DOT Air Fittings Brass Push in Fitting, Push to Connect Union Fittings, Air Brake Union 1/4" Tube OD for Trucks Trailers Use and Industria Workshops (4 PCS)

  • 【PREMIUM MATERIAL】：Our air brake fittings are made of high quality CA360 brass,Meets D.O.T FMVSS 571.106 ,SAE J1131 Air Brake system Requirements and Air Brake system Requirements,with corrosion resistance, high temperature ductility and low permeability. Great for long time use, dot air brake fitting pneumatic fittings type: 1/4" ..
  • 【EASY TO USE】: Union connect two tube with same OD. All dot air quick connect fittings can be sealed by pushing the tube firmly into the fittings and they are also simple to be removed from the tube..
  • 【TYPICAL APPLICATION】：Air brake fittings assortment kit can be used with air systems, copper tubing in air lines brake systems, which is perfect for automotive car or truck repair,air operated seats, operating gauges, air horns, industrial workshops, air brake connections,towing machine hose connection and air brake connections or lawn mower repair..
  • 【PRESSURE RANGE】: Air brake fittings working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer’s recommendations for pressure and temperature mut....
Check Stock

Thorstone Pneumatic Brake Fluid Bleeder Tool Kit, 1L Vacuum Brake Oil Change Set with Extractor and Refill Bottle +4 Master Cylinder Adapters + 2 Air Quick Plugs, for Car, Truck, Motorcycle 90-120PSI

  • ...r adapters to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it..
  • COMPLETE ACCESSORIES - This vacuum brake bleeder kit includes everything you need to quickly and easily remove air from your brakes without creating a mess.
  • 4 master cylinder adapters are suitable for most vehicles (21-30mm, 24-32mm, 28 -37mm, 32-41mm) + 2 air quick plugs + 1.8m long transparent hose + universal black tapered nipple..
  • 100% SALE SUPPORT - We back up all products for life, 24*7 fast response customer service free all your concerns. Sincerely thanks for your support to THORSTONE!.
Check Stock

SCITOO 2pc Water Pump Tool 32mm Fan Clutch Nut Wrench acd Water Pump Holder for BMW for Ford

  • ...ening size before bidding, there are only 32mm 35mm 40mm 45mm, 4 sizes adapters.
  • EASY OPERATION: Completely discharge the old coolant and trapped air first. Use the adapter or work with a suitable adapter sleeve to seat on the radiator opening, rotate the golden knob to seal. Connect the vacuum pump by the brass tee fitting to vacuumize to optimal filling pressure range: -25~-20 inHg. Then take the filling coolant hose to replace the tee fitting to fill coolant. Operate according to the instruction. The filling usually needs 5 to 10mins, depending on the size of the tank.
Check Stock

HaSaoMoi Air Brake Line Fitting, DOT Brass Push in Fitting, Push to Connect Union Fittings Air Brake Union 1/4" Tube OD for Trucks Trailers andIndustrial Use (4 Pack)

  • 【PREMIUM MATERIAL】：Our push in fittings are made of high quality CA360 brass,Certified by DOT and Air Brake system Requirements,with corrosion resistance, high temperature ductility and low permeability. Great for long time use, dot air brake fitting pneumatic fittings type: 1/4".
  • 【TYPICAL APPLICATION】：The air brake fittings assortment kit can be used with air systems, copper tubing in air lines brake systems, which is perfect for automotive car or truck repair,air operated seats, operating gauges, air horns, heater controls, industrial workshops, daily garden or lawn mower repair, towing machine hose connection and air brake connections ..
  • 【EASY TO BE INSTALLED】: Union connect two tube with same OD. All quick connect fittings can be sealed by pushing the tube firmly into the fittings and they are also simple to be removed from the tube..
  • 【MAX PRESSURE】: Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer’s recommendations for pressure and temperature mutations).
Check Stock

120 Pieces Brake Bleeder Rubber Caps Brake Bleeder Screw Caps Grease Fitting Cap Rubber Dust Cover with Keeper for Cars and Motorcycle

  • ... screw applications on cars and motorcycles, please check the bleeder screw size carefully before placing your order.
  • Reliable material: the brake bleeder dust caps are crafted with quality rubber material, durable and not easy to break or deform, firm to use and has good sealing, helpful to prevent the metal grease fitting away from erosion and rust, serve for long time use, save your time and effort.
  • Where to use: the rubber dust covers work well at keeping bleed screws and grease fittings away from dirt and moisture, designed with inner rib for better fixing and securely fastened, must-have items for car.
  • Easy to store: we provide a small box for you to store these lightweight and small size rubber brake nipple caps and no worry about losing, portable and easy to carry, you can place them in your car and would not take up too much space, bring you convenience when you need to replace the brake bleeder screw caps.
Check Stock

JEGS Vacuum Reserve Canister | Steel With Chrome FInish | Includes Grommet, One-Way 3/8 “ Check Valve, 1/8 “ NPT x 90 Degree Fitting, And 3/8 “ Barb x 1/8 NPT Port Plug

  • PROVIDES EXTRA VACUUM THAT LARGER CAMSHAFTS CAN’T PROVIDE to properly feed your power brake booster.
  • STEEL WITH CHROME FINISH for great looks and long life.
  • INCLUDES: one grommet, 1 one-way 3/8 “ check valve, one 1/8 “ NPT x 90 degree fitting, and one 3/8 “ barb x 1/8 NPT port plug.
  • OPTIONAL MOUNTING BRACKETS AND VACUUM GAUGE available separately.
Check Stock

Thorstone Brake Bleeder Kit with Hand Held Vacuum Pump Tester | 16pcs Brake Clutch Bleeder Tool with Adapters for Car Kitchen Uses | One-Man Brake Bleeding System Apply to Bike, Motorcycle, Car, Truck

  • 2-IN-1 TOOL SET - This one-man manual brake bleeding kit enables you to bleed brakes, test vacuum readings through the pressure gauge, and pump out oil, power steering fluids, and many other fluid types. Can be used on brake and clutch wheel cylinder/caliper, master or slave cylinder. To flush old brake fluid and air, and guide the new fluid to fill the brake system..
  • VACUUM SYSTEM TESTER - A manual pump with vacuum gauge could be widely used in testing vehicle vacuum system/household kitchen vacuum sealer to seal food jar, ball jar and vacuum bag. Test and diagnose a wide variety of parts and common systems on your bike motorcycle truck pickup or any other vehicle. Equipped with vacuum gauge, convenient readout of pressure, pressure range: 0-30inHg, 0-760mmHg..
  • HIGH DURABILITY & SEALING - Pressure-proof stalinite which is stronger than normal material. The metal parts are made of alloy and copper, with strong corrosion-proof performance. Our tubes are made from premium PVC for high resilience, heat resistance, and maximum sealing performance. Brake bleeding of each wheel takes less than 5 minutes with great ease..
  • COMPLETE ACCESSORIES - Include vacuum pump with gauge, 4.5oz reservoir jar, 3 transparent hoses, 6 adapters, 2 connectors and a blow mold ca....
Check Stock

NEW WILWOOD GO KART BRAKE SET WITH CALIPER PADS MASTER CYLINDER & LINE KIT FOR 1/8 ROTORS GREAT FOR KARTING JR DRAGSTER ETC SOUTHWEST SPEED

  • Wilwood Karting Kit with Brake Caliper & Pads, Master Cylinder, 5' of Nylon Line, & 90 Degree Fitting to use with Caliper if necessary. (Wilwood Part #120-5498, #260-5520, #928-503, & #928-560)..
  • Wilwood Karting Kit with Brake Caliper & Pads, Master Cylinder, 5' of Nylon Line, & 90 Degree Fitting to use with Caliper if necessary. (Wilwood Part #120-5498, #260-5520, #928-503, & #928-560). Kit Includes: Wilwood Go-Kart Caliper for .125" Rotors Fits 0.125" Thick rotors Features Two 1.00" Pistons Weighs only 1.2 lbs. Comes with high friction brake pads..
  • Wilwood Go-Kart Master Cylinder with a 1/2" Bore 1/2" Bore Weighs only .55 lbs. This super lightweight aluminum master cylinder designed specifically for kart & jr. dragster racing applications incorporates an adjustable lever ratio with a remote mount clear fluid reservoir for easy monitoring The assembly comes ready to install and includes billet bracket, lock-wired drilled hardware, & fluid line fitting ..
  • 5 Feet of -3 Nylon Brake Line 3/16" Nylon tubing 5' Should equip most karts with some left-over..
  • 90 Degree Fitting for Caliper Depending on how everything is mounted, the line might run to the caliper at a bad angle for the straight fitting. This 90 degree fitting instal....
Check Stock

TL TOOLEGIN Push to Connect Fittings 3/8" Tube OD x 1/4" NPT Male Air Line Fittings Air Hose Fittings Pneumatic Fittings DOT Air Fittings Air Compressor Quick Connect Fittings Brake Line Fittings 5pcs

  • This 3/8" push to connect elbow fitting is designed for use in pneumatic systems, operates with a working pressure of vacuum to 250psi and temperature range of -40℉ to +200℉..
  • Constructed with high-quality CA360 brass casting for long-lasting performance. Resistant to corrosion and rust, ensuring a leak-free connection for a long time..
  • TL TOOLEGIN air line fittings meet rigorous safety standards with D.O.T FMVSS 571.106 certification, ideal for those seeking a durable and reliable solution for their pneumatic system needs..
  • Easy to install, simply push the tubing into the air hose fitting to create a secure, leak-free connection. No tools, soldering, or crimping required. The fittings elbow has a compact design, allowing for flexible installation in tight spaces..
  • Widely Used, these air brake fittings are suitable for a variety of fluid and air transfer applications, such as air compressors, pneumatic control systems, and vacuum systems..
Check Stock

ATPEAM Pneumatic Vacuum Brake and Clutch Fluid Bleeder Tool Kit | Car Truck Motorcycle Brake Oil Change Set with Extractor and Refill Bottle, 4 Master Cylinder Adapters, 2 Air Quick Plugs

  • ... on it. But if 0.8L is not enough, remember to add new oil in time.
  • Easy To Use: Select a fill bottle adaptor for the master cylinder to hold it in place, fill the bottle with fluid, pop it on the master cylinder and open the valve.
  • Once the master cylinder is filled, the bottle flow will stop so you can connect the vacuum jar to an air compressor (not included), connect the bleed hose to the brake bleeder and open bleeder, then pull trigger on jar and lock in place, let it draw for 4-5 minutes, close bleeder, and check brake pedal pressure.
  • Specifications and Accessories: 34 oz used fluid bottle, 24 oz filler bottle. 4 Master Cylinder Reservoir Adapters: 1.25 in.-1.60 in (32 to 41mm) 1.10 in.-1.45 in (28 to 37mm) 0.95 in.-1.25 in (24 to 32mm) 0.80 in.-1.20 in (21 to 30mm). Air inlet: 2 type of 1/4''- 18 NPT.
Check Stock

Dastool Expert Surface Grinding Dust Shroud for Angle Grinder, Universal 5-Inch + Diamond grinding cup wheel Dt1701-125D

  • ★The dust extraction guard with a brush ring, allows collection of harmful dust surface grinding application, soft brushes prevent dust from escaping and Helps reduce user exposure to harmful Silica Dust.
  • ★Box Contains the following: 1x Dust Shroud,6 PCS clamping washer thickness 1.5-5.5mm，1x shroud wrench,1x Universal Vacuum Cleaner Hose Adapter,1x Diamond grinding cup wheel.Suitable for 39-51mm Angle grinder front cap.
  • ★Suitable for Hitachi,Makita,Ryobi,Kress,Milwaukee Dewalt CRAFTSMAN Etc 90% Main Brands with a 4.5"/5" Angle Grinder.
  • ★Flush grinding door which allows dust collection for flush edge grinding.
  • ★Universal vacuum hose connection with locks to attach to the tool,Standard hose fitting will work with most vacuum systems.
Check Stock