LINACAO 1/2/3Pcs Tools Free Copper Union Fitting with Sweat Solder Joint to Male Threaded Connects Compatible with Use Nominal Size Pipes (Size : 1)
- This hex nipple fitting Compatible with connecting two threaded pipes with same diameters, and it has a hexagonal head Compatible with an increased bearing surface when adjusting the fitting with a wrench..
- This fitting is made of Brass Compatible with corrosion resistance, ductility at high temperatures, and low magnetic permeability..
- Brass can be connected to copper, Brass, plastic, aluminum, and welded steel..
- Can be used to connect various pipes, such as air Stone, fuel Stone, water Stone, etc..
Check Stock
Hromee 18 Pieces Air Coupler and Plug Kit 1/4-Inch NPT Air Hose Fittings and Compressor Accessories with Universal Quick Coupler Brass Ball Valve Swivel Air Plug and Tee Pipe Fitting
- UNIVERSAL QUICK COUPLER - The 1/4'' NPT universal couplers (male and female) which fit Industrial (I/M), ARO (A) and Automotive (T) so you do not worry about whether it is fitting or not. Heavy duty steel air fittings are ideal for general purpose applications and the brass has good solid and durability..
- SWIVEL QUICK PLUGS - The special design of 1/4" basic swivel body, preventing hose kinks and increasing mobility, great for air tools to reduce strain on wrist and air hose. Made of high-quality corrosion resistant zinc plated hardened steel, solid body for use of a longer life. The maximum operating pressure is 300 psi..
- HEAVEY DUTY BALL VALVE - The ball valve is made of forged brass for corrosion resistance, ductility at high temperatures and low magnetic permeability. It has a plastic-covered lever handle for on/off manual control so can be used to give your tool full air flow to total shut-off. Designed for use on all pneumatic circuits and features a quick connect/disconnect positive seal..
- TEE PIPE FITTING - The tee fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. It has 2 x 1/4” female and 1 x 1/4” male for connecting pipes. Pipe ....
Check StockBrass 1/4 Barb X 1/4 NPT Male End Air Hose Pipe Fitting Threaded Connector Adapter Pack of 12
- ✅ Function -- Barb head for connecting hoses, NPT end used to connect NPT pipes. Air hose pipe can apply to water, gas, oil and fuel as well as air tools..
- ✅ Premium material -- Brass barbed hose fitting is made of high quality solid brass, firm and durable, providing high resistance to abrasion and corrosion. Solid brass hose barb can withstand up to 100 °C (212 °F)..
- ✅ Durable -- Air hose fittings is not a cast product and has a thick wall, providing a longer service life than iron and iron galvanized pipe fittings..
- ✅ Superior threads -- Deeper and smoother threads with barbed edges provide effective connection..
- ✅ CUSTOMER SERVICE -- Professional factories produce brass air line fittings. Every detail reflects a strong texture performance. Fast Delivery and 30 Days Free Refund..
Check Stock
H.A.K. PNEUMATIC Air Filter Regulator – ½” NPT Poly Bowl Compressed Air, Water Filter Lubricator Combo | Water/Oil Trap Separator | 0-140PSI | 2 Micron Brass Element
- PRESSURE REGULATOR: The speed and precision of air flow are controlled by a Regulator, while the air that passes from the Compressor is cleaned by an Air Filter. The Two Brass pipe fitting available..
- EFFECTIVE AIR FILTER: H.A.K. PNEUMATIC Air Compressor Regulator Filters the moisture and tiny particles from the air to preserve air tools including spray guns, nailers, airbrushes, tyre compressors, inflators, and pneumatic equipment. The air flow direction has mentioned in the images. Air in from Left side and get out from right side..
- EASY TO INSTALL This Pressure gauge comes with Good Impact Locking Composite Knob Inlet Outlet Port to Indicate Position Circulation. Compressed Air Gas Water Filter also have Two 1/2" Brass Pipe Fitting Straight Connector Adapters and Tread seal Teflon tape..
- AUTO LUBRICATION & PRESSURE RANGE: The lubricator plate allows atomized oil to be delivered to lubricant air tools to improve durability and work efficiency. The Pressure range of our Pressure Regulator is 0~140PSI & Rated flow is 500L/MIN. There is an option of adjusting the air pressure..
- CUSTOMER'S SATISFACTION: We guarantee everything we make. Our Primary Priority here at H.A.K. PNEUMATIC is your happiness &100% Satisfaction, which means we stand by our Air Filter....
Check StockRapidAir MaxLINE Compressed Air Piping 1' Tee M8012 Max Line Rapid Air New
- MaxLINE 1" piping tee fitting Part Number M8012.
- This MaxLINE Tee is specifically designed for the MaxLINE 1" tubing made by RapidAir and is great for adding extra tubing in multiple directions or adding extra air outlets..
- This fitting is made of solid brass and has a double o-ring seal for a no leak connection..
- It has split ring connections for easy disassembly if needed, and is rated for 175 PSI working pressure..
- Solid Brass with Nickel Plating for Maximum Corrosion Resistance.
Check StockMetaland Brass 1/2 Barbed Tee Fitting 3 Way T Shape Adapter with Hose Clamps
- √【Material】Made of solid brass, high quality, can work in high temperatures and pressure..
- √【Size】1/2"Barb x 1/2"Barb x 1/2"Barb, suitable for 1/2"ID tubing..
- √【Quantity】1PCS 1/2" brass tee barbed fitting, 3PCS hose clamps..
- √【Connetion】This 3 way splitter fitting can be connected to 3 tubings on all ends..
- √【Usage】Hose fittings are used in systems such as beer brewing, air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation..
Check StockWilkins 1/4' Male x 1/4' Female Test Cock TCS-14
- 【Material】Brass material has corrosion resistance, high temperature ductility and low magnetic permeability. The handle is made of steel plated zinc and the most twist force is 12 LBS..
- 【Wing Style】Winged style for easy to use with moisture drainage from tanks. External drain fitting for air and water service..
- 【Perfect Replacement】To replace old or damaged drain cocks on compressor tanks. Brass Winged Tank Drain Cock is the perfect replacement for damaged or leaking drain cocks for pressure vessels on air compressors or air tanks..
- 【Widely Applications】Suitable for use as an externally accessible drain in an air or water service application. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting and aviation..
Check StockGasOne 50200+2109 Gas ONE High Pressure Cast-Iron Round Burner Head with Brass Fitting O, Black
- Includes - cast iron high pressure burner head and 0-20 psi high Pressure regulator and 4 ft hose.
- Universal replacement burner - With our gas one burner head, you can use it with high pressure or low pressure regulators (high pressure regulator is recommended for high output).
- Brass fitting orifice Block - includes brass fitting orifice Block & air Shutter and spring.
- Heat resistant - cast iron will not melt easily compared to aluminum construction.
Check StockGasOne 50250+2109 Gas ONE High Pressure Cast-Iron Burner Head with Brass Fitting Orifice
- Includes - Cast Iron high pressure burner head and 0-20 psi high Pressure regulator and 4 ft hose.
- Universal replacement burner - With our gas one burner head, you can use it with high pressure or low pressure regulators (high pressure regulator is recommended for high output).
- Brass fitting orifice Block - includes brass fitting orifice Block & air Shutter and spring.
- Heat resistant - Cast Iron will not melt easily compared to aluminum construction.
- Note: Image 3 accessories: Those parts come pre-installed for customer’s conveniences.
Check StockSCITOO 2pc Water Pump Tool 32mm Fan Clutch Nut Wrench acd Water Pump Holder for BMW for Ford
- ...ening size before bidding, there are only 32mm 35mm 40mm 45mm, 4 sizes adapters.
- EASY OPERATION: Completely discharge the old coolant and trapped air first. Use the adapter or work with a suitable adapter sleeve to seat on the radiator opening, rotate the golden knob to seal. Connect the vacuum pump by the brass tee fitting to vacuumize to optimal filling pressure range: -25~-20 inHg. Then take the filling coolant hose to replace the tee fitting to fill coolant. Operate according to the instruction. The filling usually needs 5 to 10mins, depending on the size of the tank.
Check StockWYNNsky Coiled Air Hose Nylon Material Anti-Corrosion Abrasion Resistance 1/4 Inch × 12 Feet 1/4 Inch NPT Brass Air Compressor Accessories Fittings 200PSI
- Material: Nylon material, Anti-Corrosion, Abrasion Resistance, lightweight, Temperature range of -4 ℉ to +212 ℉..
- Brass Air Fittings with Spring: 1/4 Inch NPT Male Threads Size, most common connection size, spring whcih fix the fitting can prevent bending....
- Product Standard: 1/4 inch Inner Diameter, 12 Feet length, 200PSI Working Pressure, 800 Bursting Pressure, 1/4 Inch NPT Thread Size brass air....
- Application: Suitable for air transportation, pneumatic devices, pneumatic tools, air compressors, etc..
- WYNNsky Air Compressor Accessories: We're committed to providing outstanding value, top customer service and long-lasting, high-quality products to....
Check Stock
LEIMO KPARTS AC Diagnostic Manifold Gauge Set for Freon Charging, Fits R410A R22 R404 Refrigerants, 1/4' Thread Hose Set 60' with 2 Quick Coupler-r410a Manifold Gauge Set
- AC A/C Manifold Gauge Set —- 3-way air conditioning diagnostic manifold gauge set for R404a, R410a, R22 refrigerants. Designed for AC charging, diagnostic check and recovery work.
- Necessary tools for HVAC, car air condition maintenance and coolant or Freon adding.Widely used for household air conditioning units.
- Refrigerator, air conditioner and industrial refrigeration equipment..
- Easy to operate and install, strong sealing for durability and safety.The solid brass gauge threaded connector and hose fitting is different from the brass plated construction, corrosion-resistant and rustless——ideal for professional auto mechanics. .
- Freon Charging Hose 4000PSI Burst 800PSI Max W.P. each hose is approx. 5ft ( 60 inches / 152 cm) with 1/4″ SAE fitting——HIGH PRESSURE HOSES with ¼” SAE standard fittings using the highest technology rubber materials giving the hoses the most flexibility and reducing the risk of kinking.
- Include 3-PC 5FT extra long Freon charging hose, 3 color for easily recognition, red for high pressure, blue for low pressure, yellow for refrigerant bottle –r410a manifold gauge set.
Check StockAupoko R12 R22 to R134a Adapters, R134A Refrigerant Tank Adapter Kit with Valve Core Remover, 1/4' Male to 1/2' Female, 1/4’’ SAE Female X 1/2’’ Male Refrigerant Tank Adapters
- ★ FITMENT ---- R134A to R12 fitting adapter refrigerant tank, perfect fit for air conditioning refrigerant system..
- ★ PREMIUM QUALITY ---- The R134A brass vacuum pump adapter is made of high quality brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
- ★ EASY INSTALLATION ---- R134A adapter is quick and easy to install, secure fitting, no-leak connection..
- ★ DIMENSION ---- 1/4" Male to 1/2" Female, 1/4’’ SAE Female X 1/2’’ ACME Male R134A adapter fitting with valve core..
- ★ 1 YEAR WARRANTY ---- Order r134a adapter fitting from Aupoko, we can provide 12 months warranty, should be there any question, please feel free to contact us..
Check Stock
