Categories

Best Brass Bending Tool

XSPC Easy Cut & Bend Toolkit for XSPC PETG Tubing

  • Heavy Duty Hose Cutter – The heavy duty cutter can cut through PETG tubing as effortlessly as you would cut flexible PVC tubing. Easily cut PETG rigid tubing without the need for a saw..
  • PETG Easy Bending Tool – This tool allows you to easily bend PETG tubing at an angle between 0 and 180 degrees. Just heat the tubing with the bending rubber inserted, insert the tube into the tool and bend it to the required radius. This simple tool takes the guess work and difficulty out of bending rigid tube. (Suitable for 12-14mm outer diameter tubing).
  • Bending Rubber – Solid rubber extrusion for bending PETG tubing. Insert into the tube before bending, to stop the PETG tube kinking, or deforming. (Bending rubber diameter is 10mm).
  • PETG Chamfer Tool – Quickly chamfer the edges of PETG tubing by using this handy tool. Just insert the tubing and turn anticlockwise..
  • PETG Edging Sandpaper – Ideal for sanding the edges of PETG tubing, after using a chamfer tool..
Check Stock

Antstone Tubing Bender Kit with Reverse Bend 1/4"-7/8" HVAC Ratchet Copper Pipe Bender Tool Set 90° Bend with 7 Dies for Refrigerator Air Conditioner Repair

  • [Parameters] - Applicable pipe outer diameter: Φ1/4'', 5/16'', 3/8'', 1/2'', 5/8'', 3/4'', 7/8''.
  • applicable pipes: for soft copper / brass pipes only..
  • [High Efficiency] - This pipe bender can be operated with one hand. You can save time and effort and improve work efficiency..
  • [Forward & Reverse Bending] - The pipe bender can be bent in both forward and reverse directions to meet the needs of your different workplaces..
  • [Compact & Portable] - This hvac tool kit has a compact design, making it easy to work in tight spaces, which includes: pipe bender body*1, deburring knife*1, bending groove*2, dies*7, thicken toolbox*1..
  • [Wide Application] - This tubing bender is widely used for HVAC, refrigerators, automobiles, hydraulic and pneumatic systems maintenance, etc..
Check Stock

Bonbo 5PCS Blacksmith Anvil Hardy Tool Set 1 Inch Hot Cut Tool, Creasing Stake Tool, Bottom Fuller, Turning Bending Scrolling Fork, Bending Forge Scrolling Welding Jig

  • Bottom Fuller Tool: Used in the anvil or clamped in a vise to form metal. Use a hammer to work from the top, while the hardy tool works from the bottom. This gives you different anvil surfaces and edges to work with. Square shanks fit the square hole in the anvil and prevent rotation..
  • Turning Bending Scrolling Fork: Used to bend fork in an anvil or in a vice. Used to bend heated steel, quickly forming the curved shape you want. Perfect for making "S" hooks, bending medium stock and most scroll work. This tool allows you to get leverage for bending metal by hand, with a hammer, or with a bending wrench..
  • Bending Forge Scrolling Welding Jig: Fits in 1 inch Hardy hole in an anvil or can be used in a vise. Perfect for making larger "S" Hooks, Bending Medium Stock, and Most any Scroll Work..
Check Stock

Cavnewt Hat brim bender,Hat rack,Hat shaper,Hat organizer for baseball cap,Hat pins for fitted hats,Fitted hats for men,Hat curving band,Hat bender brim,Hat curving tool,Fitted hat,Caps

  • 【Easy to use】Insert the hat into the hat bending tool and leave it for more than 24 hours, the curve of the brim can be perfectly displayed. Use the hat bending tool to stand for more than 24 hours before participating in activities or wearing a hat, and the curve after bending is perfect..
  • 【No environmental restrictions】The hat bending machine is easy to carry and can be used on the table, door hat rack, hat hook, and can also be used outdoors.
  • 【Sturdy and durable】The hat shaper uses high-quality abs, which is flexible in bending and will not be easily broken, caught by the door, and will not break.
  • 【Two options】The hat stylist has a large radius of 2.5 inches and a small radius of 2 inches. The edge bending machine has two bending radii to choose from, and the shape after bending is different..
  • 【Wide Applicable】The hat bending tool is suitable for all visor hats,suitable for sun hats,baseball caps,fishing hats,hunting hats,cowboy hats,sun hats,casual hats, Ashland Cap,Canvas Mesh-Back Cap,Pizza Hat,Trucker Mesh Cap.
Check Stock

6 Pieces Wax Carving Tool Wax Tool Carving Tool Stainless Steel Sculpting Tool Spoon 4.75 Inch (Silver)

  • Please use (PTK3030) plank bending tool for thickness over 1mm.
  • Ideal for bending planking strips to the desired curvature.
  • Excellent price with 2 blades, planking tool & plastic blade holder.
Check Stock

Mophorn YP-9 Manual Bench Top Compact Bender Pipe Bending Machine 7 Dies 1-3inch Metal Fabrication Tube Rod Pipe Bender 44ft Mount Powdercoat Telescoping Handle Maximum 5/8 Thick 1-15/16inch Width

  • 5/16" Bending Range: The bender can easily and smoothly bend max thickness stocks the diameter of tubes. And The metal bending tool is made of A3 high-hardness steel.
  • it can be used for a long time. The heavy base improves stability during operation..
  • 7 Superior Steel Dies: We provide 7 interchangeable tube bender dies, ranging from 1" to 3". All these are made of reinforced steel for durable use. The bending heads can meet different usage needs, making your work more convenient..
  • Different Shape of Materials: The product is able to bend different metal materials such as steel, wrought iron, brass, copper, aluminum, etc. And it can bend different shape of material, such as flat stock, round stock, square stock..
  • Energy-saving Structure: The metal bender adopts a long handle with ergonomic design for effortless operation. At the same time, this iron bender machine has a wide support surface. It can be installed on a bracket or simply on the ground..
  • Universal Usage: A multifunctional steel bender machine produces grids, gates, balcony railing, patio furniture, iron la....
Check Stock

3Pcs 14mm OD Hard Rigid Tube Bender Mould Tool Kit, Rigid Tubing 45/90/180 Degree Bending Kit, Acrylic Bending Jig Set, Hard Pipe Bend Die Tube Tool Suitable for Water Cooling System

  • 【Bender Mould】3Pcs Hard Rigid Tube Bender Mould Kit is mainly used for angle setting. Heat the hard tube to a certain degree, then place the tube on the grinding tool at different angles to shape it, and the required angle can be bent.
  • 【Wide Application】Hard tube/Acrylic tube bending tool set. Multi-angle acrylic bending mould for AWGM3 series, each group with a total of three. 45/90/180 curvature, suitable for 14mm rigid tubes.
  • 【High Quality】 The tube bender is made of ABS plastic material, the angle of the positioning groove is precise, and the molds are mirror polished to ensure the best contact effect between the finished product and the tube body.
  • 【Bending Tool】It is convenient and simple, a good helper for hot folding. The bending kit is an ideal tool for professionals and beginners, measuring / cutting / heating / bending. Need enough heat to bend (such as a heat gun).
  • 【Note】This bending mould set is suitable for 14mm rigid tube, please check it before use. The heat gun must be used in a ventilated place, wear protective gloves and goggles. If you have any questions, please contact us.
Check Stock

Zhangxin Brass Sheet Roll Brass Strip High Purity Gold Film Brass Foil Copper Sheet,Thickness 0.3mm,50x1000mm

  • Material: H62 brass Sheet. High strength, good plasticity, good weldability, corrosion resistance..
  • Has strong wear resistance, high strength, hardness, corrosion resistance, good machinability, easy welding, Suitable for manufacture all kinds of deep drawing and bending force components..
  • Material properties: hot processing temperature is 750-830 degree.
  • The annealing temperature is 520-650 degree.
  • The low temperature annealing temperature for eliminating internal stress is 260-270 degree..
  • It is one of the widely used ordinary brass varieties. Used for the loaded parts made of a variety of deep stretching and bending stress such as pin, rivets, washers, nuts, conduit, barometer spring, screen mesh, radiator parts,etc..
  • Package included: 1 x Brass Foil Copper Sheet.
Check Stock

Kitchen Cleaning Scrub Brush,Deep Gas Stove Brass Wire Brushes with Stiff Bristles & Cooktop Scraper,Scrubber Brush for Range Hood Grease Grime, Rust Cleaner Brush for Pot Pan,Household Cleaning Tools

  • Versatile kitchen tool: Brass wire brush +nylon brush on one side and stainless steel nail + spatula on another side. This brush size is made for small jobs and tight spaces. Durable and strong. Combine brush, sparse, stainless steel needle pick and shovel into one, 4-in-1 function, easy to clean the counters,gas stoves, etc ..
  • Golden brass wire bristles: Good scrubbing strength, can wipe away rust, oil stains and food burn marks on the stove. Stubborn stains can be cleaned..
  • Nylon stiff brush: Made of high-quality nylon stiff bristles, not easy to flattening out and bending, long-lasting for daily use.Perfect for pots, pans, kitchen, sink, tile, and household cleaning. Help you remove grease and food particles..
  • Foldable stainless nail: The foldable tip part ( nail ) can be used to clean the holes of the stove top, thus preventing clogging. The 180° rotatable steel nail is easy to store after use..
  • Flat Scraper Tool : The flat spatula at the rear is convenient to clean up the daily accumulation of burn marks and large oil stains. Featuring the tail hanging hole design, this brush be hung for storage to save space, and it is easy to dry..
Check Stock

YELUN Garden Hose Elbow Connector 90 Degree Solid Brass Pipe Fittings Hose Elbow -Eliminates Stress and Strain On RV Water Intake Hose Adapter 3/4' FHT x 3/4' MHT (2 SETS)

  • Package Include: Solid brass 90° ​Angle Hose Elbow (2Pcs)+ Extra 2 Pressure Washers..
  • Operation: freehand or tool ( Wrench) ，No Leaks,Durable, Easy to Install..
  • Sturdy material: these hose connectors are made of 58-3 brass, which is rustproof, corrosion resistance and durable.
  • US Standard: Standard 3/4" threaded,The 90-degree Angle is designed, relieve the strain of the hose hanging off your faucet,Keep the water flowing,3/4" Water hose connector perfect for garden, RV, lawn. Elbow adapter helps connect a hose to an appliance without bending, kinking or straining the hose..
  • Quality guranteed :With 3 years product warranty. If you have any problem with this product,feel free to email or call us.We will replace it or give your money back for any reason..
Check Stock

4PCS Blacksmith Anvil Hardy Tool Set 1 inch - Creasing Stake Tool, Hot Cut Tool, Bottom Fuller &Turning Bending Scrolling Fork

  • 【APPLICATION】-- This Blacksmith Anvil Forge Hardy Tool Set fits in a 1 inch Hardy hole in a anvil or can be used in a vise.Square shanks fit the square hole in the anvil and prevent rotation..
  • 【Turning Bending Scrolling Fork】This is a really handy tool for making S hooks or other basic turning/scrolling shapes. This tool allows you to get leverage for bending metal by hand, with a hammer, or with a bending wrench..
  • 【Bottom Fuller Tool】Bottom fuller hardy tools are used in the anvil or clamped in a vise to form metal. Use a hammer to work from the top, while the hardy tool works from the bottom. This gives you different anvil surfaces and edges to work with..
  • 【Creasing Stake Tool】Two piece of bar stock weld it together on a stand. This is used for doing creases in metal. You can put the metal on the tool and use a chisel to drop the metal down into the slot..
  • 【Hot Cut Tool】This plate stands straight up with a Hand Forged, hardened and Sharpened edge along the top. To place orange/red hot steel over edge and strike with hammer. Cuts through hot steel pretty quick..
Check Stock

Ring Bender Ring Bending Tool Set, Ring Making Tool with Dies Ring Bending Machine, Earring Bending Tool Ring Sizer Measuring Tool Multi-Functional Jewelry Making Tool

  • 【What's Package Included】The ring bending tool for spoon rings is designed for professional and beginner. The ring bender set comes with dual-head rubber hammer, ring sizer measuring tool set, including ring mandrel sizer, ring measuring stick, 27 pieces circle models and ring size gauge. This ring bender kit is suitable for Jewelry making, jewelry processing, jewelry repair, and jewelry measurement..
  • 【Tips for Ring Bender】Regarding about the hardness of metal, we recommend this bending tool for soft metals less than 3mm thick. Although many people use this method to make spoon rings,the ring bending tools is designed for soft precious metals. We offer screws for you to fix ring bender to workbench..
  • 【Premium Ring Bender Tool】Our ring bender machine is made of solid steel and then hardened to 45-50 HRC, which has superior performance and exquisitely made. Each steel post and die are black oxidized, and there is no corrosion for life. The base and handle performs at a high level of torque what allowing the user to exert less resistance in bending metals..
  • 【Widely Applications】Ring Making Kit is one of th....
Check Stock

Ferrule Crimping Tool Kit, LUNEY Wire Ferrule Kit with 1250PCS Wire End Ferrules & Crimper Plier, Self-adjustable Ratchet Tool Set for AWG 23-7 Electrical Wire Connectors, 0.25-10mm²

  • ...ty during crimping to avoid wasting terminals..
  • 【Professional Crimping Tool】Ferrules ensure reliable electrical connections, and they will prevent fraying and breaking of individual wire strands. Insulated ferrules also support the conductor, preventing breakage due to bending, wire stress and vibration..
  • 【Package Includes】You will receive ferrule crimping tool kit, which includes 1250 wire end terminals and crimper piler (AWG: 23-7). And the crimping area is 0.25-10mm². They can be used for industrial electricians, ferrule connectors, Electrical connectors, equipment switch, relay power supply, car audio, lamp, speaker wiring project, and so on..
  • 【Important】Before you start installing ferrules, make sure the wire is not live. You should never install ferrules on live wires! If you are not satisfied with our products or have any questions, you can contact us and we will reply you within 24 hours..
Check Stock