Best Brass Coupling Fitting

Suncast Slide Trak 150 ft. Wheeled Hideaway Bronze Hose Reel

Dixon FAB250N Aluminum Hose Fitting King Short Shank Suction Coupling with Brass Nut 2-1/2 NST Female x 2-1/2 Hose ID Barbed

• Coupling for connecting a hose to a pipe or fitting.
• Hose barb on one end and female NST threads on the other.
• Aluminum shank for resistance to corrosion and chemicals and brass nut for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
• Barbed fitting for a tight seal on hoses and a rubber seal for high elasticity and resistance to abrasion and impact forces.
• Nut for tightening threaded fitting with a wrench.

KUNTEC Victor Style Cutting Torch CA1350 & 100FC Acetylene Oxygen Welding Cutting Torch Set

• 90 degree head For use with multiple gas types: Oxy-Acetylene, Propane, Butane, Natural and LP Gases, and Propane.
• Brass coupling nut & double o-ring tapered seal gives quick gas-tight seal without a tightening wrench..
• Connection: B fitting (9/16" - 18), 1pc 3#101 cutting nozzle,built in reverse flow check valves no need for accessory check valves.
• Constructed with high strength alloy, heavy duty stainless steel and durable brass.
• Package includes: 1 set of torch handle, 1 set of cutting attachment, 1 piece cutting tip.

Weber 7627 QCC1 Hose and Regulator Kit for Genesis Gas Grill, 30-Inch

• Includes 30 inch rubber hose (5/16 inch diameter) with regulator, threaded brass fitting and QCC1 coupling nut.
• Genuine Weber part for Genesis 300-series gas grills.
• Regulates liquid propane flow for consistent, uniform heat distribution.

ECUDIS 10 PCS Lamp Pipe Brass Coupling 0.6 Inch Long 1/8 IP for Lamp Rod and Light Fixture Assemlby or Repair Lamp Tube Threaded Locknuts

• 0.6 Inch fitting to connect two separate threaded rods or pipes..
• Fits 1/8 IP standard lamp pipe, hardware DIY repair part..
• Brass material makes the lamp pipe connection duralble and antirusting.
• ECUDIS makes and sells easy to use products, if you have any questions please contact us..

Yellow Jacket 42024 Series 41 Manifolds with 3-1/8\ Gauge, 60\ Plus II Standard Fittings, bar/psi, R-410A

• INSTALLS IN SECONDS: PEX water manifold requires no soldering or glue.
• LINER: No loose components with SharkBites' tube liner, nothing to lose and easy to create a dependable secure connection.
• COPPER, PEX, CPVC: SharkBite straight coupling plumbing fittings fits copper tubing, and CTS CPVC and PEX and connects all three types in any combination.
• EXPANDABLE and FLEXIBLE: Simple – Connect multiple manifolds together using SharkBite PEX Fittings.
• LEAD FREE: All SharkBite brass fittings are made of Lead Free DZR brass for a durable fitting that is also corrosion resistant.

Anderson Metals 57014-06 Brass Hose Fitting Union 3/8 x 3/8 Barb

• Union coupling for connecting two hoses with the same diameter in a straight run.
• Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
• Barbed fitting for a tight seal on hoses.
• These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

134a Quick Coupler AC R134a Adapter Fittings Quick Connector 1/4 SAE Male Flare High/Low A/C Freon Manifold Gauge Hose Conversion Kit

• [High Quality]--Made of brass metal construction, durable, reliable .Quick action 6-ball operated, safe design to protects against injury and....
• [High/Low SAE Male Fitting]--Quick coupling connections sizes are 1/4" inch SAE Male Fitting. Easy identification with colored knobs - Red for high....
• [Widely Applicable]--This adapter is used for connecting 1/4" SAE hose fitting to R134a automobile refrigeration tank, which adapt to the female flare....
• [Easy to use]--Quick, Easy Connect/Disconnect, High Flow.
• Adjustable to fit different Valve Cores..
• [Method of Use]--Connect bottoms with vehicle's R134A service port.
• connect the R-134A adapter with the refrigerant hose..

PEX Pipe Plumbing For Beginners: Complete Guide To Plan, Design, Install And Maintain PEX Plumbing Systems

• Directly from One of the Biggest Pex Systems Manufacturers.
• NSF Certified Pex Pipe/Tubing 1/2" Blue and Red 100 ft x2 Rolls for Potable Water.
• Pex Crimp Lead Free Brass Fitting 1/2" coupling, Elbow, Tee 5 PCS/each -15 PCS.
• Pex Cinch Clamp Tool with 50 PCS Stainless Steel Cinch Clamps.

uxcell 5mm to 6.35mm Aluminum Alloy Shaft Coupling Flexible Coupler Motor Connector Joint L25xD19 Silver,5pcs

• Material: made of good quality brass, antioxidant and durable.
• 12 pcs brass material 6mm length hexagon motor flexible coupling.
• Coupler copper shaft coupling for the automotive tires DC motor robot car.
• Package Include: 12 x Shaft Motor Flexible Coupling Coupler, 4 x Allen Wrench, 24 x Screws.

Dixon BCM76 Brass Hose Fitting, Machined Coupling, 3/4\ GHT Male x 3/4\ Hose ID Barbed

• Coupling for connecting two hoses or pipes with the same diameter in a straight run.
• Connects to a hose on one end and a GHT female connector on the other.
• Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
• For use with rubber (styrene butadiene), neoprene, Viton, leather, or rubber gaskets (not included).
• Hex nut for tightening threaded fitting with a wrench.

Legines 2pcs Barb Union 1/2 Barbed x 1/2 Barbed Splicer Brass Hose Fitting Mender Joiner

• Union coupling for connecting two hoses with the same diameter in a straight run.
• Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
• Barbed fitting for a tight seal on hoses.
• These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Legines 2pcs Barb Union 3/8\ Barbed x 3/8\ Barbed Splicer Brass Hose Fitting Mender Joiner

• Union coupling for connecting two hoses with the same diameter in a straight run.
• Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
• Barbed fitting for a tight seal on hoses.
• These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..