Best Brass Gas Valve
Welding Torch Fueled By 20 lb Propane With Type 1 Valve, OPD Valve
- HEIGH TEMPERATURE RESISTANCE| Stainless steel head has a heigher melting point than brass, it is more reliable.
- MONEY-SAVER | It use propane tank with OPD valve, this gas is cheaper than MAPP gas..
Check StockIKENIUP One Stop Gas Appliance Hook Up Kit, 22'' Stainless Steel Flexible Gas Connector with 1/2''Brass Gas Shutoff Valve for Gas Log, Gas Dryer, Garage Heater, Gas Stove, Wall Heater and Fireplace
- INCLUDES EVERYTHING FOR INSTALLATION - This Gas Appliances Installation Kit Includes 22” flexible gas line (with 1/2" Female Flare on both end) , 3 different adapters (1/2" Male Flare x 1/2" Male Pipe, 1/2" Male Flare x 3/8" Male Pipe & 1/2" Male Flare x 3/8" Female Pipe), 1/2" brass gas shut off valve, and yellow gas pipe thread seal tape. It has everything needed for installing most gas appliances and easy to install..
- HIGHLY DURABLE & LONG SEVERITY LIFE - Made of High Quality 304 Stainless Steel. Designed for safe, optimal flow rate, the flow capacity is up to 150K BTU. This dryer gas line kit is 100% Leak Tested, CAS certified.
- it has good air tightness, durability, rust and corrosion resistance. It is the perfect choice for hooking up your gas appliances..
- CORRUGATED DESIGNED - The stainless steel gas line is designed with corrugation, which has high-level flexibility and is not easy to be damaged. Can be better used in a narrow range. Also, the corrugated gas line connector has staggered spacing every 2 inches to eliminate noise..
- BRASS GAS SHUT OFF VALVE - The shut off valve is a great feature that allows you to directly shut off the flow instead of operating on the appliances. It is convenience for servicing appliances or summer shutdown..
Check Stock3/4\ NPT Female Threaded IPS Ball Valve Full Port Water Stop Shut Off,Heavy Duty Lead Free Brass,Quarter Turn,Blue Handle (1-Pack)
- 3/4" NPT Female Threaded IPS Brass Full Port Water Stop Shut Off Ball Valve ,Heavy Duty Lead Free ,Quarter Turn.
- Heavy duty: forged Brass ball valve pressure is rated 150 psi wsp for steam and 600 psi woc for water, oil and gas.
- 3/4" Threaded IPS Lead Free Brass Water Cut off Ball Valve.
- Size: 3/4" IPS Brass Ball Valve Max Pressure (PSIG):150 Max. temperature: 200°F.
- IAPMO Listed to cUPC - "Lead-Free" Compliant.
Check StockMr. Heater F271239 One-Stop Universal Gas-Appliance Hook-Up Kit,Small
- 5-piece universal gas-appliance hook-up kit.
- Comes with everything needed for installing most gas appliances.
- Includes 18-inch flexible gas line, 3 different couplings and on/off valve.
- On/off valve provides easy servicing of appliances or summer shutdown.
- Solid brass fittings. One Stop Universal Gas Appliance Hook Up Kit has everything needed for installation and can be used with gas logs, unvented wall mount heaters, gas stoves, and garage heaters.
Check StockBACOENG A Tap Kegerator Door Refrigerator Conversion Kit No Tank
- ... tank pressure with pinpoint accuracy. A convenient knob style pressure dial that can be adjusted without tools. Shutoff valve with built in spring loaded check valve to prevent beer from flowing backward into the gas lines..
- 2. HANDLE D-SYSTEM KEG COUPLER: D-System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply grip the handle and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
- 3. CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this beer faucet puts a stylish finishing touch on your kegerator at a price you'll love.The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles. This 4-1/8" long beer shank with nipple assembly is constructed from chrome-plated brass and can be mounted through a 1" hole..
- 4. METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential t....
Check Stock1/2 Brass 12V DC Electric Solenoid Valve Normally Open Air Water NBR
- Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
- 1/2" Brass direct acting with NBR gasket..
- This highly responsive valve will open and close in less than 1 second when actuated.
- meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
- PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
- to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
- As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..
Check Stock1/2 Brass Electric Solenoid Valve 110V AC NBR Seal N.O Air Gas,Fuel
- Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
- 1/2" Brass direct acting with NBR gasket..
- This highly responsive valve will open and close in less than 1 second when actuated.
- meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
- PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
- to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
- As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..
Check StockGASPRO 22 Inch Gas Appliance Hook Up Kit for Gas Logs Fireplace Vent-Free Wall Heater Garage Heaters 5-Piece
- 【Compatibility】 Perfect for gas log, stove, gas dryer, fireplace, wall heater, garage heater and other gas appliances.
- 【Combo Kit】Includes 22-inch flexible hose, 3 different coupling, brass shutoff valve. It has everything you need to hook up the appliances.
- 【Well Made】 Braided stainless steel and solid brass for safe and long-lasting use.
- 【Time Saver】 Multiple standard adapters save you some time from not having to buy all the parts separately from hardware store.
- 【Convenient Design】The shutoff valve is a great feature that allows you to directly shut off the flow instead of operating on the appliances.
Check StockEZ-FLUID 1-1/2 NPT Female Threaded IPS Ball Valve Full Port Water Stop Shut Off,Heavy Duty Lead Free Brass,Quarter Turn,Blue Handle 1-Pack
- 1-1/2" NPT Female Threaded IPS Brass Full Port Water Stop Shut Off Ball Valve ,Heavy Duty Lead Free ,Quarter Turn.
- Heavy duty: forged Brass ball valve pressure is rated 150 psi wsp for steam and 600 psi woc for water, oil and gas.
- 1-1/2" NPT Threaded IPS Lead Free Brass Water Cut off Ball Valve.
- Size: 1-1/2" NPT IPS Brass Ball Valve Max Pressure (PSIG):150 Max. temperature: 200°F.
- IAPMO Listed to cUPC - Certified to NSF 61-G - "Lead-Free" Compliant.
Check Stock1/4 Brass 12V DC Electric Solenoid Valve NPT NBR Seal Normally Open Air Water
- Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
- 1/4" Brass direct acting with NBR gasket..
- This highly responsive valve will open and close in less than 1 second when actuated.
- meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
- PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
- to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
- As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..
Check StockEZ-FLO 1/4 Inch OD Self Tapping Saddle Valve Brass 65801LF
- ICE MAKER SADDLE VALVE KIT: Quick connect saddle valve kit provides everything you need to supply liquid where a low volume, low pressure stream is....
- SIZE: This natural gas saddle valve supports 3/8 inch to 1-5/16 inch OD (outside diameter) tube, and features a 1/4 inch OD (outside diameter)....
- CERTIFIED: This drain saddle valve is certified lead free, making it suitable and safe for all potable water supply installations.
- DURABLE: Self piercing saddle valve is composed of heavy duty brass metal for long-lasting reliability.
- EASY INSTALLATION: This brass saddle tap valve comes already assembled with a captive sleeve, which puts even pressure on the tubing, ensuring a tight....
Check StockLow Pressure LPG Propane Gas Fireplace Fire Pit Flame Failure Safety Control Valve Kit, with Thermocouple Knob Switch with 5/8''-18UNF Flare Inlet & Outlet Replacement for Gas Grill Heater Fire Pit
- WIDE COMPATIBILITY --- The propane lpg gas fire pit control safety valve kit is suitable for gas grill, heater, fire pit, fireplace if same connections. IT'S LOW PRESSURE PROPANE ONLY..
- EASY INSTALLATION --- This low pressure LPG propane gas fireplace fire pit flame failure safety control valve kit is easy to install, install vertically at the opening of the device container..
- PREMIUM QUALITY --- The fire pit gas control valve kit are made of high quality brass material with heavy-duty construction for durable use..
- DEMENSION --- Flame failure valve with inlet and outlet with Flare thread 5/8’’-18UNF, 750mm thermocouple with M8*1 threaded head..
- 1 YEAR WARRANTY --- This gas fire pit control valve replacement parts complete with 1-Year limited warranty, should be there any question, please feel free to contact us..
Check StockColeman Propane Fuel, 16 oz, Propane Camping Cylinde 4-Pack
- DIMENSIONS: 11.8"x1.1"x1.1"/30cmx2.8cmx2.8cm.
- MATERIAL: Super Duralumin, Brass, Stainless, Rubber.
- USES: Convert EN417 Lindal Valve Canister to the one can be used on Propane Stove, very efficient. It is a useful tool for your camping, backpacking, hunting, BBQ, barbecue and other outdoor occasions..
- FEATURES: *OUTDOOR USE ONLY* ①The adapter can connect EN417 Lindal Valve Canister (screw-on type) to propane gas device(burner,stove,lantern,etc..), and it is equiped with regulating valve for gas flow rate adjustment. ②Extend hose can keep your propane tank farther away from gas device, which is more convenient to use. ③Package include: 1 * Propane Stove Adapter with Extend Hose(11.8""/30cm) Z29-30.
Check Stock