Categories

Best Brass Glass Hinge

DreamLine Unidoor Plus 57 1/2 - 58 in. W x 72 in. H Frameless Hinged Shower Door in Brushed Nickel, SHDR-245757210-04

  • Model Size: 57 1/2 - 58 in. W x 72 in. H.
  • Configuration: Shower Door and Inline Panel.
  • Premium 3/8 in. (10mm) certified tempered glass.
  • DreamLine ClearMax water and stain resistant glass coating.
  • Reversible for a right or left door opening.
  • Solid brass wall-to-glass self-closing hinges.
  • Inline attached to the wall by a 1 in. anodized aluminum U-channel.
  • 1/2 in. width or out-of-plumb adjustment available on Inline panel side.
  • Pictured SlimLine shower base is not included.
  • IMPORTANT! All measurements should be taken only AFTER walls are finished (tile, back walls, etc.).
  • Wall studs or other reinforcement behind finished walls required for hinge installation.
  • 57-1/2 to 58 in. W x 72 in. H Brushed Nickel. Door walk-in: 26 in. Panel(s): 30-1/2 to 31 in. Finished walls are required for width measurement.
  • U-channel provides up to 1/2 in. width or out-of-plumb (vertical) adjustment. Single door, one panel. Reversible for right/left opening installation.
  • 3/8 in. (10mm) thick ANSI certified clear tempered glass. Solid brass self-closing hinges (5 degree offset). Frameless glass design.
  • Wall studs or other reinforcement behind finishe....
Check Stock

DreamLine Unidoor Plus 33 1/2 - 34 in. W x 72 in. H Frameless Hinged Shower Door in Brushed Nickel, SHDR-243357210-04

  • Model Size: 33 1/2 - 34 in. W x 72 in. H.
  • Configuration: Shower Door and Inline Panel.
  • Premium 3/8 in. (10mm) certified tempered glass.
  • DreamLine ClearMax water and stain resistant glass coating.
  • Reversible for a right or left door opening.
  • Solid brass wall-to-glass self-closing hinges.
  • Inline attached to the wall by a 1 in. anodized aluminum U-channel.
  • 1/2 in. width or out-of-plumb adjustment available on Inline panel side.
  • Pictured SlimLine shower base is not included.
  • IMPORTANT! All measurements should be taken only AFTER walls are finished (tile, back walls, etc.).
  • Wall studs or other reinforcement behind finished walls required for hinge installation.
  • 33-1/2 to 34 in. W x 72 in. H Brushed Nickel finish. Door walk-in: 26 in. Panel(s): 6-1/2 to 7 in. Finished walls are required for width measurement.
  • U-channel provides up to 1/2 in. width or out-of-plumb (vertical) adjustment. Single door, one panel. Reversible for right/left opening installation.
  • 3/8 in. (10mm) thick ANSI certified clear tempered glass. Solid brass self-closing hinges (5 degree offset). Frameless glass design.
  • Wall studs or other reinforcement behind fi....
Check Stock

DANSEER Moravian Star Light Modern Brass Pendant Light 15 Inches with Clear Glass Shade

  • Transitional Design:Brass finished,this moravian star light bringing a transitional modern chic to your home decor..
  • Clear Glass Shade:Handcrafted of sparkling clear glass with a frame and hardware finished in Craftsman Brass..
  • Unique Design:A hinge on the side of the star pendant light lifts up for easy bulb changing..
  • Height Adjustable:This brass pendant light can be adjusted as you need,it comes with Max 47.24" chain..
  • Bulb Requirement:Compatible with 1* E26 based bulbs (NOT included).Fully dimmable with compatible dimmer switch(NOT included).
Check Stock

DreamLine Unidoor Plus 58-58 1/2 in. W x 72 in. H Frameless Hinged Shower Door in Oil Rubbed Bronze, SHDR-245807210-06

  • Configuration: Shower Door and Inline Panel.
  • Premium 3/8 in. (10mm) certified tempered glass.
  • DreamLine ClearMax water and stain resistant glass coating.
  • Reversible for a right or left door opening.
  • Solid brass wall-to-glass self-closing hinges.
  • Inline attached to the wall by a 1 in. anodized aluminum U-channel.
  • 1/2 in. width or out-of-plumb adjustment available on Inline panel side.
  • Pictured SlimLine shower base is not included.
  • IMPORTANT! All measurements should be taken only AFTER walls are finished (tile, back walls, etc.).
  • Wall studs or other reinforcement behind finished walls required for hinge installation.
  • Limited Lifetime Manufacturer Warranty. (Oil Rubbed Bronze and Satin Black finishes limited to 1 (one) year warranty).
  • 58 to 58-1/2 in. W x 72 in. H Oil Rubbed Bronze. Door walk-in: 27 in. Panel(s): 30 to 30-1/2 in. Finished walls are required for width measurement.
  • U-channel provides up to 1/2 in. width or out-of-plumb (vertical) adjustment. Single door, one panel. Reversible for right/left opening installation.
  • 3/8 in. (10mm) thick ANSI certified clear tempered glass. ....
Check Stock

DreamLine Unidoor Plus 35 in. W x 34 3/8 in. D x 72 in. H Frameless Hinged Shower Enclosure in Chrome, SHEN-24350340-01

  • Configuration: Shower Door with Inline and Return panel.
  • Premium 3/8 in. (10mm) certified tempered glass.
  • DreamLine ClearMax water and stain resistant glass coating.
  • Reversible for a right or left door opening.
  • Solid brass wall-to-glass self-closing hinges.
  • Return Panel attached to the wall by a 1 in. anodized aluminum U-channel.
  • 1/2 in. width or out-of-plumb adjustment available on Return panel side.
  • Pictured SlimLine shower base is not included.
  • IMPORTANT! All measurements should be taken only AFTER walls are finished (tile, back walls, etc.).
  • Wall studs or other reinforcement behind finished walls required for hinge installation.
  • 34-3/8 in. D x 35 in. W x 72 in. H Chrome finish hardware. Door walk-in: 28 in. Panel(s): 6 in. Finished walls are required for width measurement.
  • U-channel provides up to 1/2 in. width or out-of-plumb (vertical) adjustment. Single hinged door, one stationary panel and one return panel.
  • 3/8 in. (10mm) thick ANSI certified clear tempered glass. Solid brass self-closing hinges. Reversible for right/left door opening installation.
  • Wall studs or other reinforcement behind f....
Check Stock

Rockwell Classic 180 Degree Glass to Glass Shower Hinge in Brushed Nickel Finish

  • 180 degree Glass to Glass Shower Door Hinge.
  • Glass Thickness: 3/8" (10mm) to 1/2" (12mm) Tempered Glass.
  • Stainless Steel Hardened Coil Springs and Pin.
  • Self centering within 15 degrees from closing position.
  • Industry standard fits typical glass cutout template.
  • Accessories – gaskets, template cut out dimensions.
Check Stock

Rockwell Classic 180 Degree Glass to Glass Shower Hinge in Antique Black Finish

  • 180 degree Glass to Glass Shower Door Hinge.
  • Glass Thickness: 3/8" (10mm) to 1/2" (12mm) Tempered Glass.
  • Stainless Steel Hardened Coil Springs and Pin.
  • Self centering within 15 degrees from closing position.
  • Industry standard fits typical glass cutout template.
  • Accessories – gaskets, template cut out dimensions.
Check Stock

Rockwell Classic 180 Degree Glass to Glass Shower Hinge in Polished Chrome Finish

  • 180 degree Glass to Glass Shower Door Hinge.
  • Glass Thickness: 3/8" (10mm) to 1/2" (12mm) Tempered Glass.
  • Stainless Steel Hardened Coil Springs and Pin.
  • Self centering within 15 degrees from closing position.
  • Industry standard fits typical glass cutout template.
  • Accessories – gaskets, template cut out dimensions.
Check Stock

DreamLine Enigma-X 34 1/2 in. D x 48 3/8 in. W x 76 in. H Fully Frameless Sliding Shower Enclosure in Brushed Stainless Steel, SHEN-6134480-07

  • Configuration: Shower Door with Inline and Return panel.
  • Premium 3/8 in. (10mm) certified tempered glass.
  • DreamLine ClearMax water and stain resistant glass coating.
  • Reversible for a right or left door opening.
  • Solid brass wall-to-glass self-closing hinges.
  • Return Panel attached to the wall by a 1 in. anodized aluminum U-channel.
  • 1/2 in. width or out-of-plumb adjustment available on Return panel side.
  • Pictured SlimLine shower base is not included.
  • IMPORTANT! All measurements should be taken only AFTER walls are finished (tile, back walls, etc.).
  • Wall studs or other reinforcement behind finished walls required for hinge installation.
  • 34-3/8 in. D x 46 in. W x 72 in. H Brushed Nickel finish. Door walk-in: 23 in. Panel(s): 22 in. Finished walls are required for width measurement.
  • U-channel provides up to 1/2 in. width or out-of-plumb (vertical) adjustment. Single hinged door, one stationary panel and one return panel.
  • 3/8 in. (10mm) thick ANSI certified clear tempered glass. Solid brass self-closing hinges. Reversible for right/left door opening installation.
Check Stock

Glass Shower Door Hinges, Heavy Duty Glass Door 90 Degree Hinges Stainless Steel Bathroom Gate Clamp for 8-12 mm Toughened Glass, Rust Corrosion Resistance

  • shower door hinge replacement hinges for shower glass door shower door hardware shower door hinges glass door hinge shower door hinges glass shower door hinges glass door hinge.Constructed from high quality Stainless Steel,ensuring quality and longevity,sturdy and durable.
  • 3-Layers Frosted spray sliver finish,Beautiful and elegant color and build to resist daily scratches,corrosions and tarnishing..
  • Notice: Fits 8mm-12mm or 1/3" to 1/2" Thick Glass,largest bearing 40 lbs per hinge.glass door hinge glass door hinges glass hinge glass shower door hinges hinges for glass doors shower clamps shower door hardware parts shower door hinges shower glass clamp shower glass door hinges shower hinges glass door.
  • glass door hinge glass door hinge shower glass shower door hinges shower glass door hinges Self closing from 25 degrees and self centering to 0 degrees in the closed position.glass hinge glass door hinges for cabinets glass shower door hinges glass door hinge cabinet hinges cabinet door limiter cabinet hinges glass clips for cabinet doors pivot hinges for cabinet doors hinge restrictor clip.
  • Included package:1x hinge,4X screws and expansion bolt, and 1 Allen key.glass door shower door hinges shower door hinge gold door hinges glass shower door hinges s....
Check Stock

WANLIAN Heavy Duty 90 Degree Glass Door Cupboard Showcase Cabinet Clamp Glass Shower Doors Hinge Replacement Parts Wall-to-Glass for 8-12 mm(0.31-0.47 inch),Stainless Steel Polished Chrome

  • 1.glass warehouse hinge Constructed from high quality Stainless Steel,ensuring quality and longevity,sturdy and durable,Stainless Steel Polished Chrome.
  • 2.Polished Chrome Finish and 4mm-Thick stainless steel will not broken,Single Ear Stepless Hose Clamps 304 Stainless Steel Wire Tube Pipe Fuel Line Clip Assortment kitHeavy Duty 90 Degree Glass Door Cupboard Showcase Cabinet Clamp Glass Shower Doors Hinge Replacement Part Wall-to-Glass.
  • 3.Notice: Fits 8mm-12mm or 1/3" to 1/2" Thick Glass,largest bearing 40 lbs per hinge.shower door hinges shower hinges glass door glass hinge frameless shower door hinges glass door hinges shower door hinge shower door hardware glass shower door hinge gasket.
  • 4.Self closing from 25 degrees and self centering to 0 degrees in the closed position.frameless shower door hinges shower hinges glass door glass door hinges shower door hinge shower door hinges glass door hinge glass shower door hinges glass shower door hinge gasket shower door hinge gasket glass hinge.
  • 5.Included package:1x hinge,4X screws and expansion bolt, and 1 Allen key.shower door hinge shower hinges glass door frameless shower door hinges glass door hinges living hinge shower door hinge gasket shower door hinges glass door hinge glasses hinge.
Check Stock

DreamLine Unidoor Plus 58 1/2 - 59 in. W x 72 in. H Frameless Hinged Shower Door in Chrome, SHDR-245857210-01

  • ...nish. Door walk-in: 27 in. Panel(s): 30-1/2 to 31 in. Finished walls are required for width measurement.
  • U-channel provides up to 1/2 in. width or out-of-plumb (vertical) adjustment. Single door, one panel. Reversible for right/left opening installation.
  • 3/8 in. (10mm) thick ANSI certified clear tempered glass. Solid brass self-closing hinges (5 degree offset). Frameless glass design.
  • Wall studs or other reinforcement behind finished walls required for hinge installation. Professional installation recommended.
  • Shower base is not included. Limited lifetime manufacturer warranty. Warranty for any hardware in Oil Rubbed Bronze finish is limited to 1 (one) year.
Check Stock

Dophee 2pcs Vintage Industrial Style Hinges with Screws for Cupboard Cabinet Door Folding Butt Antique Brass Size 2.83 x1.97 x1.34

  • 【SOLID BRASS】 Made of 2mm thick Solid Brass, so it’s very strong to hold all kind of doors, or box/box lid. Also have good anti-corrosion....
  • 【BRUSHED EFFECT】 Brushed effect on Solid Brass hinge and clear top coating give the hinge perfect looking and match well with all kinds of....
  • 【EASY TO INSTALL】 6 Pre-drilled counter sinking hole and matched wood screws(Philip head, gold color) make it very easy to be installed.
  • 【FREE SCREWS】 We did special match for the hinge, the screws fit well with the hinge both the size and the color.
  • 【ROUND CORNER】 Hinge with round corner make it high end looking and better protect our safety.
Check Stock