Categories

Best Brass Hydraulic Fittings

Joywayus 1/4 NPT Female 1/2 Male Brass Bulkhead Fitting Bulk Head Pipe Fitting Bulkhead Tank Fitting Coupler

  • Gasket and nut for air tight seal through bulkhead..
  • Joywayus female coupler for connecting 1/4" NPT fittings through a bulkhead..
  • Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)..
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
  • This bulkhead fitting is suitable for connecting brass, bronze, or iron hydraulic lines through a bulkhead..
Check Stock

Cardone Select 13-2693 New Brake Master Cylinder

  • Includes OE features such as brackets, grommets, molded plastic guards, and wire clips to provide correct fit and easy installation.
  • Premium brass fittings provide an excellent hydraulic seal. Teflon Lined: No.
  • Performs to standards required by OE manufacturers ensuring optimal protection, service life, and safety.
Check Stock

Dorman M39980 Brake Master Cylinder Compatible with Select Jeep Models

  • Includes OE features such as brackets, grommets, molded plastic guards, and wire clips to provide correct fit and easy installation.
  • Premium brass fittings provide an excellent hydraulic seal.
  • Performs to standards required by OE manufacturers ensuring optimal protection, service life, and safety.
Check Stock

Racewill 25 ft 3/16 Copper Coated Brake Line Kit Includes 16 Fittings and 4 Unions Brake Line Fittings + Brake Line Double & Single Flaring Tool Kit

  • MATERIAL：Racewill copper coated steel line is easy to be bent by hand and flare by simple tools.all brake line fittings are made of durable brass to prevent rust and plated for corrosion resistance.
  • UPGRADE TO 20 FITTINGS: ① 2 x 3/16” (7/16-24) Inverted Tube Nut.
  • ② 10 x 3/16" (3/8-24) Inverted Tube Nut.
  • ③ 2 x 3/16” (1/2-20) Inverted Tube Nut.
  • ④ 2 x 3/16"(9/16-18) Inverted Tube Nut.
  • RUST AND CORROSION PROOFING：Our 3/16 Copper coated steel line are the longest lasting brake line and much better than standard steel tubing. Copper coated brake line are ideal for vehicles experiencing harsh weather and environmental conditions.
  • MAKE DOUBLE & SINGLE FLARES: Designed to use when flaring single or double flare in a variety of material: copper, aluminum, brass, magnesium, and soft steel brake line tubing. Flaring tool apply to 1/2", 3/8", 5/16", 1/4", 3/16" O.D. tubing..
  • WIDELY APPLICATION：Brake line and fittings Fits for Most Hydraulic Braking Systems, Fuel Systems, and Transmission Systems,etc. It is also widely fit for household, industrial and commercial uses..
Check Stock

Hooshing Brass Pipe Fitting, 1/2' Female to 1/2' Male Pipe Nipple Extension Connector Fitting, Hex Bushing Adapter, Reducer Adapter, Solid Brass Length 1.97 Inch/50mm

  • 【Material】High quality soild brass for corrosion resistance, high temperature ductility and low magnetic permeability. Strong and durable..
  • 【Size】1/2 Inch Female x 1/2 Inch Male Thread, the thread is NPS, have no tapered. It's straight thread..
  • 【Extension Design】Length: 1.97 Inch/50 mm, can be used to extend the length of the pipe or fitting.Deeper and smoother threads makes work easier and more efficient..
  • 【Widely Applications】Use to extend shower fixtures/arms through walls, extend tub spouts.Also be used with grease, fuels and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections..
  • 【Note】Brass pipe fittings for connecting pipes or fittings of different thread types, can be used in wet environments.Not recommended for potable water..
Check Stock

Permatex 80632 Thread Sealant with PTFE, 4 oz. , White

  • Economical general-purpose fitting sealant.
  • Seals and resists pressure in air, oil, diesel fuel and hydraulic systems.
  • Remains pliable at higher and lower temperatures.
  • Suggested Applications: Air conditioning fittings, temperature sending fittings, hydraulic fittings.
Check Stock

OKBA 64pcs JIC 37° Flare Thread Cap&Plug Kit,37 Degree JIC Cap and Plug Assortment Kit Precision Threading Hydraulic Hose Tube Pipe Adapter AN Fittings Set Kit Dash Sizes 04 06 08 10 12 16

  • 64 PCS hydraulic JIC cap & plug fittings kit,AN assortment hydraulic fitting set,also known as "AN" 37 degree flare JIC caps and plugs. The JIC 37° flare thread cap & plug can be easily installation to seal hydraulic hoses, tubes, and pipes.
  • A must have for hydraulic lines: hydraulic JIC plug and cap cap kit works great for hydraulic repairs.The JIC cap and plug are sealed quickly keep hydraulics lines from fluid leaking when remove fluids hydraulic application/machinery work/ truck/chemical processing systems.
  • The hydraulic adapter fittings set are made by carbon steel to withstand high pressure applications and high heat fuel delivery and fluid power applications. The jic cap and plug kit fittings have precision threading to make sure install smoothly and resist corrosion.
  • Packed in a plastic carring storage box case and with size chart with thread sizes,keeps all 37° JIC caps & plug fitting organized with dash sizes: 04, 06, 08, 10, 12,16.
  • Package including:#4 (7/16-20) JIC caps&plugs---each 10PCS| #6 (9/16-18)caps&plugs ---each 8PCS| #8 (3/4-16)caps&plugs---each 6PCS| #10 (7/8-14)caps&plugs---each 4PCS| #12 (1 1/16-12) caps&plugs---each 2PCS| #16 (1 5/16-12) caps&plugs---each 2PCS.
Check Stock

1/8 NPT Female Brass Bulkhead Fitting Bulkhead Coupling,1.5 Length Tank Fitting

  • 1/8" NPT female coupling for connecting 1/4 inch NPT fittings through a bulkhead.
  • For use with LP and natural gas, refrigeration, and hydraulic applications.
  • 1200 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • NOT DEEMED LEAD FREE. NOT FOR POTABLE WATER.
Check Stock

Litorange 4 PCS 1/2 Inch NPT Male Plug Fittings Brass Cored Plug with Square Head for Boat Gas,Drain plug etc

  • ★ Material：Heavy Duty Brass,strong and durable.Litorange Brass for corrosion resistance, high temperature ductility and low magnetic permeability..
  • ★ Application：For use with Fuel,LP and natural gas, grease,refrigeration,instrument and hydraulic applications. Temperature range of -65°F to 250°F (-53°C to 121°C)..
  • ★ Tip:These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
  • ★ Teflon tape and thread sealant are recommended for threaded joints. Package Include: 4 PCS 1/2" Male NPT Plug..
Check Stock

Litorange 1 PCS 3/4 Inch NPT Male Plug Fittings, Brass Cored Plug with Square Head for Boat, Gas,Drain plug etc.

  • ★ Material：Heavy Duty Brass,strong and durable.Litorange Brass for corrosion resistance, high temperature ductility and low magnetic permeability..
  • ★ Application：For use with Fuel,LP and natural gas, grease,refrigeration,instrument and hydraulic applications. Temperature range of -65°F to 250°F (-53°C to 121°C.
  • ★ Tip:These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
  • ★ Teflon tape and thread sealant are recommended for threaded joints. Package Include: 1 PCS 3/4" Male NPT Plug.
Check Stock

QLOUNI 80Pcs 7-21mm 304 Stainless Steel Single Ear Stepless Hose Clamps with Clamp Crimper Tool Kit,For Water Pipe, Plumbing, Automotive and Mechanical Application

  • 10T Crimping Power: Fits 1/2"(12.7mm), 3/4"(19.05mm), 1"(25.4mm) copper tubes. Our hydraulic pipe crimping tool features excellent crimping performance, offering 10 Tons compressive force, more labor-saving, and crimping pipes in seconds..
  • Changeable Dies 1/2", 3/4", 1": With ball-bearing springs inside the head, simply slide in and out to change crimping dies of different sizes. This hydraulic copper tube fittings crimper meets your various demand fast for pipe maintenance and repair..
  • Hydraulic System: The hydraulic pipe crimper is constructed of 40CR steel with punching & forging process and powder-coated treatment. It is an integral hydraulic pipe crimping tool with a standard manual hydraulic pump..
  • Easy & Reliable: Thickened and insulated handles give you a comfortable and secure user experience. Fitted with an oil return valve, this hydraulic pipe tube crimping tool will release pressure automatically when reaching the max pressure..
  • Wide Application: The hydraulic copper pipe crimping tool is suitable for copper pipes, copper fittings & joints, copper sleeves. It is widely applied in electric power, traffic, petroleum, chemical engineering, mining, metallurgy, and shipbuilding areas..
Check Stock

Litorange 3 PCS 3/4 Inch NPT Male Plug Fittings, Brass Cored Plug with Square Head for Boat, Gas,Drain plug etc

  • ★ 【{Material】：Heavy Duty Brass,strong and durable.Litorange Brass for corrosion resistance, high temperature ductility and low magnetic permeability..
  • ★ 【Application】：For use with Fuel,LP and natural gas, grease,refrigeration,instrument and hydraulic applications. Temperature range of -65°F to 250°F (-53°C to 121°C)..
  • ★ 【Tip】:These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
  • ★ Teflon tape and thread sealant are recommended for threaded joints. Package Include: 3 PCS 3/4" Male NPT Plug.The OD size is 1" or 25mm..
Check Stock

64 Pcs JIC 37° Flare Thread Cap & Plug Assortment Kit Seal Adapter Set for Hydraulic Hose Tube and Pipe SAE AN Fittings Galvanized Carbon Steel with Precision Threading Dash Sizes 4 6 8 10 12 16

  • SUPERIOR PERFORMANCE: AquaAulos hydraulic fittings are made to the highest standards, with our JIC cap and plug kit meeting or exceeding SAE J514 conventions. These industrial heavy-duty JIC fittings are made from premium carbon steel galvanized with robust and long-lasting zinc, which prevents rust, corrosion, and degradation, even with extended use. Over time these fittings are exposed to hose fluid, so this durability is essential. You can trust our products like any leading brands, such as Parker, Eaton Aeroquip, or Gates, as they have been rigorously tested and meet the industry standards for pressure, temperature, and material strength!.
  • PRECISION-ENGINEERED: We understand the importance of heavy-duty craftsmanship, which is exactly what we strive for in every piece in this kit. Our state-of-the-art CNC machine provides ultra-precise production, ensuring that the caps and plugs are made with fine-tolerance thread with good sealing for easy, repeated installation and removal. This extra attention to the manufacturing process enhances the adapter's performance. It provides customers with a competitive advantage through less downtime and extended equipment life, leading to increased revenues and reduced warranty costs..
Check Stock