Categories

Best Brass Manifolds

DASBET Car Vacuum and Fuel Pump Tester Gauge Kit, Fuel Pump and Vacuum Tester Gauge, Leak Carburetor Pressure Diagnostics

  • Professional Tester Kit: Fuel Pump Pressure & VacuumTester Gauge Kit, Carburetor Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts.
  • Diagnose leaking valves, incorrect timing, leaky intake manifolds, and clogged mufflers. Fuel pump operating pressures up to 10 PSI (0.7 Bar), Pressure gauge 0-28 IN-Hg (0-70 cm-HG) vacuum and 0-10 PSI (0-0.7 kg/cm²) pressure.
  • Easy-to-use: Includes a variety of adapters ideal for most vehicles.
  • 4-inch (10.2cm) diameter pressure gauge with color-coded measurement scales, 1.2-inch (3cm) thickness with rubber side notches, easy to read and grip.
  • Extra-long rubber hose and 14mm/18mm manifold adapter.
  • Rubber hose 40 PSI (2.8 Bar) maximum working pressure.
  • Easy Storage: All the tools are well organized in a storage case for easy transportation, simple storage, and quick identification.
  • Package Included: (1) vacuum pressure gauge, (1) 2-foot (61cm) long rubber hose – 13/64-inch ID 23/64-inch OD, (1) brass cone adapter, (1) plastic connector, (1) 1/4”x18 male to 1/8”-2....
Check Stock

ATPEAM Vacuum and Fuel Pump Tester Gauge Kit, Fuel Pump Pressure & Vacuum, Carburetor Intake Manifold, & Vacuum Test

  • Rubber hose 40 PSI (2.8 Bar) maximum working pressure.
  • Professional Tester Kit: Fuel Pump Pressure & VacuumTester Gauge Kit, Carburetor Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts.
  • Diagnose leaking valves, incorrect timing, leaky intake manifolds, and clogged mufflers. Fuel pump operating pressures up to 10 PSI (0.7 Bar), Pressure gauge 0-28 IN-Hg (0-70 cm-HG) vacuum and 0-10 PSI (0-0.7 kg/cm²) pressure.
  • Easy Storage: All the tools are well organized in a storage case for easy transportation, simple storage, and quick identification.
  • Package Includes: 1x Gauge,1x 24-inch long rubber hose 40 PSI,1x brass cone adapter,2x plastic connector,1x 1/4" x18 male to 1/8" -27 female brass adapter,1x 1/8”-27 male to 7/32" barbed brass fitting adapter,1x 1/8"-27 female to 3/8" male brass adapter,1x T-type 7/32" barded fitting adapter.
Check Stock

SharkBite 3 Loop Radiant Heating Manifold, Push to Connect Brass Plumbing Fitting, PEX Pipe, PE-RT, 24930

  • SHARKBITE RADIANT HEATING MANIFOLDS: PEX Radiant Manifolds ensure flow to each circuit is regulated precisely, while also controlling shut-off and allowing the venting of air from the heating system.
  • WHAT IS INCLUDED: This innovative radiant manifold includes (1) 1 inch FNPT inlet and (3) loops featuring integrated 1/2 inch SharkBite push-to-connect fittings.
  • features flow-balancing valves and flow meters to avoid waste and ensure thermal comfort.
  • DURABLE AND HIGH QUALITY: These heating manifolds are made with stainless steel that provides durability and protects against corrosion.
  • EASY TO INSTALL: The stainless steel manifold designed for use in a PEX system is easy to install with no special tools, crimping, glue, or soldering required.
  • SPECS: Temperature gauges on supply and return manifolds to ensure proper supply temperature and evaluate heat loss at the return manifold.
Check Stock

4-way 5/16" Barb CO2 Distributor Manifold with integrated check valves

  • LIGHT AND DURABLE aluminum body is lighter than steel but remains durable and long lasting. Aluminum is the industry standard for CO2 manifolds for their strength and resistance to corrosion. This manifold is ideal for homebrewers, bars, or anyone who is looking to easily split gas for beer or beverage dispensing and even for force carbonation..
  • INTEGRATED HIGH QUALITY CHECK VALVE OUTPUTS prevent liquid from flowing into the manifold and your regulator. Don’t worry about dirty lines or ruined regulators ever again! Every integrated check valve ensures that your beer stays on the right side of the line..
  • NO LEAKS due to ample thread tape and vigorous water testing after assembly. All manifolds are internally cleaned before assembly for the purest air possible. Don’t settle for mass produced, low quality manifolds from overseas. The Weekend Brewer manifold is the highest quality manifold on the market due to rigorous testing and quality control..
  • MOUNTING HOLES allows for easy installation on walls or kegerators. Two screws or nails will easily secure your manifold to any surface for ease of use..
  • MADE IN THE USA These manifolds are assembled by American workers in our Fayetteville, AR facility..
Check Stock

BATONECO Polished Airgap Intake Manifold High Rise Dual Plane Compatible with SBC Chevy 350 400

  • 100% NEW - Made of high-quality aluminum material, Natural Intake Finish, Package Contents: Intake Manifold..
  • COMPATIBILITY - Intake Manifold Compatible with Chevy Small Block SBC 350 400..
  • ADVANTAGE - Basic Operating RPM Range: Idle-5500.
  • FEATURE - intake manifolds are the perfect performance upgrades for your engine. These cast-aluminum manifolds are pressure-tested for leaks..
  • DESIGN - The intake manifolds feature a high-flow runner design to deliver improved power from idle to 5500 rpm..
Check Stock

Schneider Electric AG13B020 Tac Erie Spring Return Two-Position General Close-Off Actuator Without End Switch, Normally Closed

  • Designed for use with Uponor TruFLOW manifolds, stainless-steel manifolds, or engineered polymer (EP) manifolds.
  • Accurately controls the flow of fluid through individual radiant loops.
  • Features an end switch for activation of a relay pump, heat plant, or other auxiliary devices.
Check Stock

The Weekend Brewer 8-way 5/16" Barb CO2 Distributor Manifold with integrated check valves

  • LIGHT AND DURABLE aluminum body is lighter than steel but remains durable and long lasting. Aluminum is the industry standard for CO2 manifolds for their strength and resistance to corrosion. This manifold is ideal for homebrewers, bars, or anyone who is looking to easily split gas for beer or beverage dispensing and even for force carbonation..
  • INTEGRATED HIGH QUALITY CHECK VALVE OUTPUTS prevent liquid from flowing into the manifold and your regulator. Don’t worry about dirty lines or ruined regulators ever again! Every integrated check valve ensures that your beer stays on the right side of the line..
  • NO LEAKS due to ample thread tape and vigorous water testing after assembly. All manifolds are internally cleaned before assembly for the purest air possible. Don’t settle for mass produced, low quality manifolds from overseas. The Weekend Brewer manifold is the highest quality manifold on the market due to rigorous testing and quality control..
  • MOUNTING HOLES allows for easy installation on walls or kegerators. Two screws or nails will easily secure your manifold to any surface for ease of use..
  • MADE IN THE USA These manifolds are assembled by American workers in our Fayetteville, AR facility..
Check Stock

The Weekend Brewer 2-way 5/16" Barb CO2 Splitter Distributor Manifold with integrated check valves

  • LIGHT AND DURABLE aluminum body is lighter than steel but remains durable and long lasting. Aluminum is the industry standard for CO2 manifolds for their strength and resistance to corrosion. This manifold is ideal for homebrewers, bars, or anyone who is looking to easily split gas for beer or beverage dispensing and even for force carbonation..
  • INTEGRATED HIGH QUALITY CHECK VALVE OUTPUTS prevent liquid from flowing into the manifold and your regulator. Don’t worry about dirty lines or ruined regulators ever again! Every integrated check valve ensures that your beer stays on the right side of the line..
  • NO LEAKS due to ample thread tape and vigorous water testing after assembly. All manifolds are internally cleaned before assembly for the purest air possible. Don’t settle for mass produced, low quality manifolds from overseas. The Weekend Brewer manifold is the highest quality manifold on the market due to rigorous testing and quality control..
  • MOUNTING HOLES allows for easy installation on walls or kegerators. Two screws or nails will easily secure your manifold to any surface for ease of use..
  • MADE IN THE USA These manifolds are assembled by American workers in our Fayetteville, AR facility..
Check Stock

CO2 Distributor Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold, Co2 Air Manifold, Kegerator Splitter, 2-way Kegerator Distributor Manifold 1/4" with Integrated Check Valves by MRbrew

  • Gas manifolds/distributors allow you to dispense your beer from multiple kegs. They are installed to create a faucet draft system. This means that you can dispense your beer and beverages quickly for your guests while maintaining equal pressure from all to to all of your faucets. A gas manifold can split the delivery of gas into several divisions to serve the draft beer system..
  • SAVE MONEY by using a single CO2 tank for multiple kegs. Great for force carbonation or dispensing! This Air Manifold / Distributor is designed to allow you to use one regulator to supply two different kegs. This is the same high-quality air distributor we use in our Kegging kits. LIGHT AND DURABLE aluminum body is lighter than steel but remains durable and long lasting..
  • NO LEAKS due to ample thread tape and vigorous water testing after assembly. All manifolds are internally cleaned before assembly for the purest air possible. It contains a brass cock valve with a check valve. Check valves are very important to keep the beer from backflowing into your system!.
  • Has predrilled Holes for mounting and you can expand the unit by removing plug and adding an additional valve or additional manifold, so it grows with your system. This manifold features output and input barbs made for....
Check Stock

PEX Manifold Radiant Floor Heating Set 3 Loop System Stainless Steel Heated Hydronic Heating For 1/2" Oxygen Barrier Tubing

  • ★HIGH QUALITY CONSTRUCTION: Made of Stainless Steel and Chrome plated our Radiant PEX manifolds are sturdy and very durable. It easily resists corrosion and provides durability.
  • ★ALL-IN- ONE: Each manifold comes with Flow Meters, Shut-Off Ball Valves, Drain/ Fill Valves, and compression connectors.
  • ★EASY INSTALLATION: Our manifolds comes with their own heavy duty mounting brackets making them easily attachable to any wall. They come pressure tested and pre-assembled.
  • ★COMPATIBILITY: Our manifolds are perfect for Size 1/2 Inch Radiant Heat PEX tubing. (Not recommended for potable water).
  • ★30-DAY MONEY BACK GUARANTEE: Your satisfaction is always our priority. For whatever reason you are unhappy with the product you can simply return the item. No questions asked.
Check Stock

PEX Manifold Radiant Floor Heating Set 6 Loop System Stainless Steel Heated Hydronic Heating For 1/2" Oxygen Barrier Tubing

  • ★HIGH QUALITY CONSTRUCTION: Made of Stainless Steel and Chrome plated our Radiant PEX manifolds are sturdy and very durable. It easily resists corrosion and provides durability.
  • ★ALL-IN- ONE: Each manifold comes with Flow Meters, Shut-Off Ball Valves, Drain/ Fill Valves, and compression connectors.
  • ★EASY INSTALLATION: Our manifolds comes with their own heavy duty mounting brackets making them easily attachable to any wall. They come pressure tested and pre-assembled.
  • ★COMPATIBILITY: Our manifolds are perfect for Size 1/2 Inch Radiant Heat PEX tubing. (Not recommended for potable water).
  • ★30-DAY MONEY BACK GUARANTEE: Your satisfaction is always our priority. For whatever reason you are unhappy with the product you can simply return the item. No questions asked.
Check Stock

GM Parts 12345982 Supercharger Gear Oil

  • Fantastic design places turbo on the passenger side, very strong manifolds.
  • Parts Included:TurboCharger -cast t3 wastegate block -35/38mm wastegate -pair of cast manifolds -Crossover pipes -Oil line kit.
Check Stock

Eastwood High Temperature Resistant Satin Black Coating Aerosol 11.75 oz

  • Produces A Custom Look For Manifolds, Headers.
  • Temperature Resistant Up To 1400 Degrees.
  • Each Can Is Sufficient To Coat 2 Standard Cast Iron Manifolds Or About 6 Sq Ft.
Check Stock