Best Brass Nozzles - TopShopReview.com

32 Pieces Brass Misting Nozzle 0.3 mm/ 0.012 Inch Orifice Replacement Head Low Pressure Atomizing Misting Nozzle and 10-24 Drill and Tap Bit for Outdoor Cooling System Patio Misting System

【PACKAGE】30PCS Brass Stainless Steel Misting Nozzles For Outdoor Cooling System..
【MATERIAL】The misting nozzles are made of brass with stainless steel orifice, anti-rust, durable, leak-proof, the mister nozzle is best choice for outdoor use with cold water..
【TECHNICAL PARAMETERS】High Pressure Outdoor Anti-drip Fogging Spray Head, 0.012" (0.3mm) orifice diameter, 10-70kg working pressure, 60-110ml/min flow rate.It is recommended to increase the use of pumps to achieve a better spray effect..
【EASY TO INSTALL】 The brass misting nozzles are easy to install, which can be easily screw into any 3/16"( UNC 10/24) threaded mist nozzle opening..
【WIDE USAGE】The misting nozzles is widely applied to outdoor cooling system, agriculture irrigation system, green house, spray disinfection, epidemic prevention, deodorizing air purification, landscaping, small fountain, etc..

Check Stock

Creality 3D Hardened Steel MK8 Nozzle with High Temperature Resistance Upgraded Tungsten All Metal Nozzle Ends for Makerbot Ender 3 / Ender 3 S1, CR-10 Series, 0.2/0.3/0.4/0.5/0.6 mm (5pcs in One Set)

[Super Durable Tungsten Material] MK8 extruder nozzles are made by paramount hardened tungsten steel, with long life use time than the normal brass nozzle. The hardness is over HRC60 can reduce the abrasion to the inner and outer of the nozzle during long time printing，more heat-resistant than ordinary brass nozzle，MK nozzles is harder than brass nozzles，which makes it durable accurate and compatible with more filaments..
[High Temperature Resistance ] The max temp of this hardened tool steel nozzle could reach at 450c, suitable for 3D printing at high temperature, compatible material from PLA,ABS to carbon fiber, even PEEK..
[High Precision] these 3D printer nozzles keep stable temperature during printing let the filament out evenly, create more perfect printer item than normal metal nozzle. Also with higher print speed in same print precision.Not easy clog during printing, easy to clean. Made with centering CNC precision automatic lathe and one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs..
[Applicability and Compatibility] Our Creality Ender-3 S1 Nozzles suit to almost all FDM printer,could install to MK8 heating block. Our tungsten nozzles fit for 3D Printer Mak....

Check Stock

Residential Misting System- Made in USA Pump- 200 psi Mid Pressure Patio Misting System-12 Nozzles Misting System

{Made in USA Pump & Tubing} Mid Pressure Patio Misting Kit complete with 200PSI Booster Pump, Cleanable Brass/Stainless Steel Misting Nozzles, UV treated flexible tubing, and push lock fittings. Easy to install..
{Pump Specifications} 110 Volt Kit Includes: - 200PSI Booster Pump with Plug (110v) - 50ft Flexible Tubing – Calcium Inhibitor Filter - 12 Brass/Stainless Steel Mist Orifice Nozzles - 0.012'' - 11 - Push Lock Mist Tees - 1 - Push Lock End Mist Elbow - 6ft Feed line with 3/4 Garden hose connector - Plastic Clamps.
{Installation} - Push Lock Fittings - Easy Connect -Whisper Quiet Operation Easy to hook with any garden hose Max Water pressure 200 PSI Supports up to 20 Nozzles Wall Mountable Plugs in to standard 115V outlet (wall plug included on 110v models only).
{Comes with Filter to protect your Nozzles} Booster Pump Features: Built-In Thermal Safety Switch Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4'' Garden Hose Connecter Outlet Fitting: 1/4'' and/or 3/8'' Push Lock.
{Easy to Expand} Booster Pump Features: Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4'' Garden Hose Connecter Outlet Fitting: 1/4'' and/or 3/8'' Push Lock. MC12020.

Check Stock

26PCS 3D Printer Nozzles Kit,MK8 3D Printer Extruder Nozzles Compatible with Creality Ender 3 Ender 3 v2 Ender 3 pro Ender 5 Ender 5 pro CR-10 and so on,3D Printer Nozzle Wrench

Wide compatibility : nozzlethe input diameter is 1.75mm, m6 thread, suitable Compatible with 3D printer Makerbot Anet A8, MK8 Reprap Prusa I3,....
Storage box : convenient for you to carry and store.
Practical wrench : A special wrench suitable for nozzles of MK8, which not only makes the adjustment and replacement of the nozzle easier, but also....
Premium material : MK8 extruder nozzles are made of hardened stainless steel, harder than normal brass nozzles，hardened stainless steel material is....
Value for money: package comes with 4 pieces of hardened steel nozzles, 16 pieces brass nozzles, 1 Nozzle Spanner ,5 nozzle cleaning needles, fficient....

Check Stock

32PCS Mk8 Nozzles 3D Printer Extruder Nozzles Hardened Steel Stainless Steel Brass High Temperature Pointed Wear Resistant Nozzle 0.4mm,Compatible with CR-10 Ender 3/ V2 Ender3 pro,Prusa i3

Value for money: 10 pieces stainless steel nozzles and 16 pieces brass nozzles,5 nozzle cleaning needles,1 Nozzle Spanner,possesses 0.2 mm,0.4....
High precision: the inner wall of the 3D printer extruder nozzle is smooth and has no burrs, its viscosity coefficient is small, and extruder nozzle....
Premium material: Our MK8 extruder nozzles are made of hardened stainless steel, harder than normal brass nozzles，hardened stainless steel material....
Good performance: this MK8 nozzle has impressive toughness and hardness, not only suitable for common 1.75 mm 3D printer filaments, but also can be....
Extensive Compatibility: Outer Thread M6，Input Diameter 1.75mm ,these high temperature pointed wear resistant nozzles are compatible with MK8 hotend....

Check Stock

Creality 10 Packs 3D Printer Hardened Steel MK8 Nozzles, Upgraded Tungsten All Metal Extruder Nozzles 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm for Creality Ender 3 Ender 3 V2 Ender 3 pro CR-10

[Super Durable Tungsten] - MK8 extruder nozzles are made by paramount hardened tungsten steel, with longer lasting time than the normal brass nozzle. The hardness is beyond HRC60, can reduce the abrasion to the inner and outer of the nozzle during long time printing, more heat-resistant and more durable than ordinary brass nozzle..
[Super High Temperature Resistance] - The max temp of this hardened tool steel nozzle could reach at 450c, suitable for 3D printing at high temperature, compatible with material such as PLA, ABS to carbon fiber, even PEEK..
[High Precision More Than Your Imagination] - Keep stable temperature during printing, let the filament out evenly, create more perfect printer item than normal metal nozzle. Also with higher print speed in same print precision. Avoid clog during printing, easy to clean. Made with centering CNC precision automatic lathe and with one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs..
[Applicability & Compatibility] - Our Creality Nozzles are compatible with almost all FDM printer, also fits for MK8 heating block. Our tungsten nozzles are also designed for 3D Printer Makerbot Creality Ender 3 series and CR-10 series 3D printer, MK....

Check Stock

3D Printer Extruder Nozzles 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm for Anet A8 Makerbot MK8 Creality CR-10 Ender 3 Ender 5 IRCHLYN 40 Pcs

【Package include】: Total 40Pcs printer nozzles for 3D printer.
10Pcs 0.4mm nozzles, 5 Pcs nozzles for each size 0.2mm 0.3mm 0.5mm 0.6mm 0.8mm....
【Printer Nozzle Parameter】: Input diameter: 1.75mm, Nozzle precision: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm, Screw thread: M6, Easy to find....
【Durable Material】: Ender 3 printer nozzles are made of premium brass material, sturdy and durable.
Fit to most non-abrasive materials such as....
【Application】: 3D Printer Extruder Nozzles fit to replace all external M6 thread connection, like Ender 3, Ender 2 Creality CR-10, Makerbot Anet....
【100% Satisfaction】: Your satisfaction is our priority. Please feel free to contact us if there is any problem after you received the Brass....

Check Stock

Orbit Cobra Personal Misting System Stand for Cooling - Includes 2 Mist Nozzles

BEAT THE HEAT: The Orbit Misting System will decrease the temperature on your outdoor patio up to 20 degrees F. You will beat the heat this summer and cool off with this awesome misting system..
EASY ASSEMBLY: This patio misting system can be assembled and having you enjoying your backyard in just minutes. It will attach to virtually any standard garden hose. No special tools are required..
STORAGE AND MAINTENANCE: If you live in an area that will see freezing temperatures be sure to drain your Orbit Mist Cooling System before winter sets in. It is recommended that you clean your nozzles once a year..
KIT CONTENTS: This outdoor misting system comes with 10 feet of 3/8 inch Flexible Feed Line Tubing, (5) 2 feet lengths of 3/8 inch Flexible Mist Tubing, (5) Brass Misting Nozzles, (6) Brass Slip-Lok T Fittings, (10) Hanging Clamps, (1) Hose Washer, (1) Brass Automatic Drain Valve, (1) Brass Slip-Lok End Plug and (1) Brass Slip-lock Hose Faucet Adapter..

Check Stock

25PCS 3D Printer Nozzles, Premium MK8 Nozzle Ender 3 Nozzles 0.4 mm, 3D Printer Brass Nozzles for Makerbot Creality CR-10 Ender3 V2 Ender3 Pro with 5 Needles by Zojicif

【High precision】the inner wall of the 3D printer nozzles is smooth and has no burrs, its viscosity coefficient is small, high precision&perfect aperture, so premium MK8 nozzle can prevent print head from leakage and allow for easy flow of the filament without clogging..
【Premium Quality】Our 3D printer nozzle are made of high quality brass material, heavy duty and provide a long service life, easy to install and change. Our premium MK8 Ender 3 Nozzles input diameter 2.00mm, output diameter 0.4 mm, out thread M6, thread length 5mm..
【Applicability and Compatibility】Our premium MK8 nozzles ender 3 nozzles fit for 3D Printers like Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 Max/Ender 5 Series/CR 10 Series, compatible-with all 1.75mm PLA ABS 3D printers. Fit exactly like the original..
【Good performance】Our precision 3d printer brass nozzles MK8 nozzle has impressive toughness and hardness, not only suitable for common 1.75 mm 3D printer filaments, but also can be applied for printing filaments of carbon fiber, fiberglass, etc..

Check Stock

mistcooling M Stainless Steel Nozzles-Outdoor Cool Down Your pa Patio System (MC560) 45 Feet Mist Line | Brass/Stainless Ste, Beige Tubing

60ft of UV resistant flexible ¼’’ tubing – 45ft mist line – 15ft supply line) 15 – Ultra fine Brass/Stainless Steel Misting Nozzles (More durable than cheap plastic nozzles) 14- Leak proof compression nozzle fittings (Pre-installed every 3 feet) 1 End plug)..
For Patio cooling, Gazbo, pool areas and play area cooling applications.
Brass/Stainless Steel Misting Nozzles, UV treated flexible tubing, High quality Misting Parts and Accessories..

Check Stock

mistcooling Patio Misting System- Tent Misting - UV Treated Flexible Tubing - Brass/Stainless Steel Nozzle - for Patio, Gazebo, Pool and Play Areas (GMC572)

72ft of UV resistant flexible ¼’’ tubing (57ft mist line + 15ft supply line) 20 – Ultra fine Brass/Stainless Steel Misting Nozzles (More durable than cheap plastic nozzles) 19- Leak proof compression nozzle fittings 1 - End Plug fitting - (Pre-cut (19 pcs) every 3 feet) Adjustable spray direction.
For Patio cooling, Gazbo, pool areas and play area cooling applications.
Brass/Stainless Steel Misting Nozzles, UV treated flexible tubing, High quality Misting Parts and Accessories..

Check Stock

Hylaea 20pcs/Pack 0.4mm Orifice Thread 10/24 UNC, Outdoor Brass Misting Nozzles, Brass Fog Mist Nozzles for Greenhouse Garden Landscaping Dust Control and Outdoor Cooling System

The Brass and Stainless Steel Misting Nozzle is the most efficient and water-conservative mist nozzle available today. It only uses 1/2 gallon per hour per nozzle and features a sturdy brass body with stainless steel orifice. The nozzle requires simple maintenance: just soak periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage. Includes: 5 Misting Nozzles.
HIGH-QUALITY CONSTRUCTION: Brass and stainless steel nozzles are sturdy and long-lasting..
WATER EFFICIENT: Cool down without wasting water. These nozzles require minimal water use of 1/2 gallon of water per hour per nozzle..
COMPATIBLE WITH ORBIT MIST SYSTEMS: Screw into any 10/24 threaded mist nozzle opening..
PRODUCT SPECIFICATIONS: For outdoor use with cold water only. Do not use in freezing temperatures..

Check Stock

Roundup PRO 190412 No Leak Pump Backpack Sprayer for Herbicides

Internal No Leak Pump design is safer to use – chemicals will not drip down your back..
Durable, 21 inch poly wand with the highest quality Viton seals for chemical resistance..
Premium, lockable shut off with brass components and an in-line filter..
Easy access pump, change seals in just minutes with no tools..
4 nozzles included: brass adjustable, 2 flat fans, and foaming nozzle. Also accepts TeeJet nozzles..

Check Stock