Categories

Best Brass Round Stock 2

Sutemribor Brass Solid Round Rod Lathe Bar Stock, Diameter 1/8 Inch+3/16 Inch+1/4 Inch, Length 14 Inches, Total 7 PCS

  • √ Diameter: 1/8 inch+3/16 inch+1/4 inch, Length 14 inch.
  • √ Package: 3 Pcs 1/8 inch Brass Rod, 3 Pcs 3/16 inch Brass Rod, 1 Pcs 1/4 inch Brass Rod,.
  • √ Sutemribor Brass Solid Round Rod Lathe Bar Stock, Diameter 1/8 inch+3/16 inch+1/4 inch, Length 14 inch, total 7 PCS.
Check Stock

PGCOKO Brass Solid Round Rod Lathe Bar Stock, 1/2 inch in Diameter 12 inch in Length

  • Product type: 1 Pieces 1/2 inch Round Solid Brass Rod Lathe Bar Stock.
  • Material: Made of high quality brass pins, corrosion-resistant, sturdy and durable.
  • Easy Cut & Use: These things are very nice and easy to cut. You can cut to any size you want according to your needs..
  • Widely Application: These rods can be cut and formed into replacement parts for almost anything, Widely used in Gear shaft, motor shaft, short support shaft, shaft pocket model, miniature axle, model plane, model ship, model cars..
Check Stock

TACTALOAD Flash-5 Stock with Integrated Magazine Loader - 5 Shell Holder, Patented Next Generation Stock Never Before Seen -Fits Remington 870

  • While most hold shells vertically, the FLASH-5 holds them horizontally making it 30% faster while reloading. Made for Remington 870.
  • Fast and easy: To retrieve shells from the Flash-5 stock, you merely pull the round out and push it into either the chamber or the magazine.
  • Because you're grabbing the round by the brass end, you can't accidentally load it backwards into the shotgun.
  • Durable and dependable: With the Flash-5 stock, the shells are safely protected inside the stock, cannot fall out under recoil or accidentally bumped off.
  • We chose the traditional style because it fits seamlessly into existing shotgun storage devices.
  • Designed for the Remington and Mossberg shotgun.
  • The Tactaload shooting accessories are specifically designed for the 12g models.
  • The recoil pad on the Flash-5 stock is the same size as the industry standard size recoil pads found on shotguns today.
  • Commitment to quality: To ensure the finest quality product, the Flash-5 defense and hunting firearm stock is made entirely in the U.S.A. from domestically sourced materials.
Check Stock

Glarks 18Pcs Brass Solid Round Rod Lathe Bar Stock Assorted for DIY Craft Tool, Diameter 2.5-8mm Length 100mm

  • Product type: High quality brass solid round rod lathe bar stock assorted.
  • Material: High hardness brass, corrosion-resistant, sturdy and durable.
  • Diameter: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm.
  • Feature: The surface is smooth, easy to shape, no cracks formed.
  • Application: Widely used in Gear shaft, motor shaft, short support shaft, shaft pocket model, miniature axle, model plane, model ship, model cars.
Check Stock

6 Pieces Brass Strip Brass Shim Stock Assortment 1 Width x 12 Length 0.002 0.004 0.006 0.008 0.012 and 0.016 Thickness,Brass Sheet Metal Shims

  • ✔ If you happen to need some brass shim stock, you do not have to drive mile to hardware store to find these, our brass shim stock assortment with 6 thicknesses to meet your different needs, this is a great value set of brass shim stock..
  • ✔ Brass flat strip is made of brass material,has nice bend-ability and good processability, excellent conductivity, you can use it according to your requirement..
  • ✔ Brass strip has high strength, high hardness. It can still work well under hot condition and has good corrosion resistance..
  • ✔ Brass shim stock assortment size: 12" Length x 1" Width, 0.002", 0.004", 0.006", 0.008", 0.012" and 0.016" Thickness. Nicely polished up..
  • ✔ Brass shim stock widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc..
Check Stock

(5) 385-571 Trimmer Head Covers Fits Stihl 25-2 Head Replaces 4002-713-9708

  • [WHAT YOU GET] – You will get 10 pieces of Trimmer Head Eyelets..
  • [DURABLE AND STURDY] – Made of high-quality brass, the trimmer head eyelets are durable and sturdy for long time usage..
  • [SPECIFICATIONS] – Material: Brass. Outer Diameter 0.55 Inch (14mm), Inner Diameter 0.17 Inch (4.3mm). Please check the size of your stock trimmer head eyelets before purchase..
  • [COMPATIBILITY] – The trimmer head eyelets fits most of trimmer heads of Strimmer Cutter. Suitable for Troy-Bilt, Craftsman, and Other More Models..
  • [WIDE APPLICATION] – The Brass Eyelet Heavy Duty for Round line. Trimmer Head Eyelets help reduce wear and extend the life of the trimmer line and also help reduce line weld..
Check Stock

3/8 Inch Brass Round Rod, Favordrory 2PCS Brass Round Rods Lathe Bar Stock, 3/8 Inch in Diameter 14 Inch in Length

  • Product type: Pack of 2 Pieces 3/8 inch Round Solid Brass Rod Lathe Bar Stock Set.
  • Material: Made of high quality brass pins, corrosion-resistant, sturdy and durable.
  • Easy Cut & Use: These things are very nice and easy to cut. You can cut to any size you want according to your needs..
  • Widely Application: These rods can be cut and formed into replacement parts for almost anything, Widely used in Gear shaft, motor shaft, short support shaft, shaft pocket model, miniature axle, model plane, model ship, model cars..
Check Stock

1/4\ x 2\ C360 Brass Flat BAR 12\ Long Solid .250\ Plate Mill Stock H02

  • 1/4" x 2" C360 Brass Flat BAR 12" Long Solid .250" Plate Mill Stock H02.
Check Stock

12 Pieces Brass Strip Brass Shim Stock Assortment 1 Width x 6 Length 0.002 0.004 0.006 0.008 0.012 and 0.016 Thickness Metal Shims Brass Sheet

  • ✔ ---- With 6 thicknesses to meet your different needs, this is a great value set of brass shim stock..
  • ✔ ---- Brass shim stock assortment size: 6" Length x 1" Width, 0.002", 0.004", 0.006", 0.008",0.012" and 0.016" thickness, 2 pieces for each thickness..
  • ✔ ---- Brass sheet is made of brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers..
  • ✔ ---- Metal shims brass sheet widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc..
  • ✔ ---- If you are a lover of DIY crafts, you should prepare this brass strip, because it is indeed widely used and multifunctional, you will definitely use it..
Check Stock

Metal Magery Brass Flat Bar Stock Knife Making Brass Bar Stock 3/8 x 1 x 6

  • This Metal Magery Brass Flat Bar Stock is the perfect size for your Knife Making and other crafting needs. Metal Magery Brass Bar Stock has a tensile strength range of 15-47 KSI, conforming to ASTM B36..
  • Great Workability: 360 Brass Flat is ideally suited for applications where strength, good corrosion resistance, electrical conductivity, and non-sparking characteristics are important. Used widely for decorative purposes because of its smooth, shiny gold-like appearance, brass flats are relative easy to polish to a desired luster with minimal effort..
  • High Quality Brass: Brass Bars have a High malleability and a low melting point, making it easy to machine or form for a wide variety of purposes, including decorative, knife making and other applications..
  • Knife Making: Wether you need to fabricate a knife guard, a bolster or a handle this brass bar stock will be perfect for your project..
  • Dimensions: 3/8" Tall by 1" Wide by 6" Long | Material: 360 Brass | Composition: Copper 61.5% Zinc 35.5% Lead 3%.
Check Stock

AAR Tree Celtic Round Kilt Belt Buckle Antique/Chrome Finish/Belt Buckles (Chrome)

  • Scottish Tree Celtic Round Kilt Belt Buckle Antique/ Chrome Finish/Belt Buckles.
  • Kilt Belt Buckle Made of Brass with High Quality Antique / Chrome Finish..
  • AAR Tree celtic round belt buckle Size Measures 3" X 3" X 1"works with velcro scottish kilt belt.
  • Can be used for many highland events, and is the perfect buckle to complete your highland dress.
  • We have this item in stock ready for immediate dispatch. This sale is for the buckle only - No belt included..
Check Stock

Crown 231W 1.25-Inch Roughing Out Gouge

  • Exceptional quality tool from Crown Hand Tools Ltd, Sheffield, England.
  • Lasts up to 6 times as long as Carbon Tools.
  • Ideal to produce a round shape from square edge spindle stock.
Check Stock

Brass Strip Brass Shim Stock Assortment 1 Width x 6 Length 0.002 0.004 0.006 0.008 0.012 and 0.016 Thickness 6 Pieces

  • With 6 thicknesses to meet your different needs, this is a great value set of brass shim stock..
  • Brass shim stock assortment size: 6" Length x 1" Width, 0.002", 0.004", 0.006", 0.008", 0.012" and 0.016" Thickness.Nicely polished up..
  • Brass sheet is made of brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers..
  • Metal sheets plates widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc..
  • Reliable service: As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product..
Check Stock