Categories

Best Brass Shim Assortment

Brass Sheet Brass Shim Stock Assortment 6 Length x 4 Width 0.001 0.002 0.003 0.005 and 0.01 Thickness Metal Sheets Plates 5 Pieces

  • With 5 thicknesses to meet your different needs, this is a great value set of brass shim stock..
  • Brass shim stock assortment size: 6" Length x 4" Width, 0.001", 0.002", 0.003", 0.005" and 0.01" Thickness.Nicely polished up.
  • Brass sheet is made of brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers..
  • Metal sheets plates widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc..
  • Reliable service: As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product..
Check Stock

Brass Sheet Brass Shim Stock Assortment 6 Length x 3 Width 0.002 0.004 0.006 0.008 ,0.012 and 0.016 Thickness Brass Shim Stock 6 Pieces

  • With 6 thicknesses to meet your different needs, this is a great value set of brass shim stock..
  • Brass shim stock assortment size: 6" Length x 3" Width, 0.002", 0.004", 0.006", 0.008",0.012" and 0.016" Thickness. Nicely polished up..
  • Brass sheet is made of brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers..
  • Metal sheets plates widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc..
  • Reliable service: As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product..
Check Stock

Precision Brand 17SX3 Brass Shim Stock, 6″ x 60″ Roll, 260 Alloy Brass, 0.003″

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability.
  • Used in applications where corrosion problems exist.
  • Especially useful for pilot production runs where material accuracy and economy are important.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
Check Stock

Valve Spring Shim - 1.500\ OD.645\ ID .060\ Thickness

  • Must-Have for Your Next Engine Build or Spring Upgrade - Production tolerances in cylinder heads, valve lengths, valve springs, retainers and locks can impact the valve spring installed height from valve to valve, greatly impacting spring seat and open pressures. COMP Cams spring shims are a must-have to ensure precise installed height on intake and exhaust valves..
  • Guaranteed Precision - COMP Cams shims are crafted from the finest shim stock steel to precise dimensions, ensuring consistent installed height adjustments from the first valve to the last..
  • Race Tough - COMP Cams valve spring shims are not only made from the highest quality shim stock available, they are also heat treated to withstand the most radical camshaft profiles..
  • 1.500" Outside Diameter, 0.645" Inside Diameter. Includes 1 0.060" Thick Shim..
  • Recommended for use with our 916, 26056, 917, 928, 929, 924, 925, 911, 954, 936, 938, 930, 953, 999, 26094, 943, 26055, 939, 927, 919, 933, 935, 944, 26095, 26097, 932, 26089,955, 26115, 26099 and 26547 springs..
  • Available in an assortment pack under part number 4757..
Check Stock

1-1/2 C360 BRASS ROUND ROD 6\ long +.07\/-0 Solid 1.50\ Diameter H02 Lathe Bar Stock

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability.
  • Used in applications where corrosion problems exist.
  • Especially useful for pilot production runs where material accuracy and economy are important.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
Check Stock

Precision Brand 17SN6 Brass Shim Stock, 6″ x 18″ Flat Sheets, 260 Alloy Brass, 0.006″ (Pack of 10)

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability.
  • Used in applications where corrosion problems exist.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
  • It is especially useful for pilot production runs where material accuracy and economy are important.
Check Stock

Precision Brand 17SN9 Brass Shim Stock, 6″ x 18″ Flat Sheets, 260 Alloy Brass, 0.009″ (Pack of 10)

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability.
  • Used in applications where corrosion problems exist.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
  • It is especially useful for pilot production runs where material accuracy and economy are important.
Check Stock

9 Piece Punch & Die Set Metal Punch Tool for Cutting Coins Metal Plastic-with Clear Acrylic Guide

  • See What You Cut- Clear plate guide for easy alignment and placement Accurate to within 0.002 inch.
  • Precise Cuts- Hole punch set made from precision ground hardened alloy steel- 9 pieces for a variety of hole sizes.
  • Backed by Amazon's A-Z Guarantee with Prime available and a 1 year manufacturer guarantee.
  • Many Uses- Works well for metal shim, brass shim stock, sheet styrene, leather punch, paper, decal stock, coin ring making, and model ship building.
  • Well Oiled And Ready To Cut- Normal to see grease on the unit Capacities: 20 Gauge Steel Sheet, 13 Gauge Aluminum & Brass.
Check Stock

260 Brass Shim Stock, Unpolished (Mill) Finish, H02 Temper, ASTM B19/ASTM B36, 0.40mm Thickness, 150mm Width, 2.5 m Length

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability.
  • Used in applications where corrosion problems exist.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
  • It is especially useful for pilot production runs where material accuracy and economy are important.
Check Stock

260 Brass Shim Stock, Unpolished (Mill) Finish, H02 Temper, ASTM B19/ASTM B36, 0.80mm Thickness, 150mm Width, 2.5 m Length

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability.
  • Used in applications where corrosion problems exist.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
  • It is especially useful for pilot production runs where material accuracy and economy are important.
Check Stock

JAVIKA 0.005 x 6 x 100 inches Brass Shim Stock Roll Half Hard Cold Rolled CDA 260 Brass Alloy for Hardware and Machine Maintenance DIY Projects Jewelry Crafts Electrical

  • Brass Shim Stock Roll is made from a half hard, cold rolled, CDA 260 brass alloy with Low Friction and Good Corrosion Resistant..
  • Sieze: 0.005" Thickness x 6" Width x 100" Length. We have 4 thicknesses to meet your different needs..
  • The half-hard copper and zinc alloy material makes the shim rust-resistant for long-lasting performance..
  • Brass Sim Stock's softness and low melting point make it suitable in a broad range of applications, particularly in machinery. They are useful in creating accurate alignments, leveling surfaces, filling gaps, and more..
  • This product is Made in Taiwan, and has been tested for quality and reliability. Packing with a carton box..
Check Stock

Small Parts-17974 260 Brass Shim Stock, Unpolished (Mill) Finish, H02 Temper, ASTM B19/ASTM B36, 0.20mm Thickness, 150mm Width, 2.5 m Length

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability.
  • Used in applications where corrosion problems exist.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
  • It is especially useful for pilot production runs where material accuracy and economy are important.
Check Stock

Spring Steel 1095 Shim Sheet Assortment Blue Tempered Polished Finish Spring Steel Shim Stock 0.004 0.008 0.015 0.02 0.024 0.03 Thick 6 Width 6 Length 6 Pieces

  • ✿---- If you are a professional tool or die maker, or a machine maintenance engineer, you may often need these precision gaskets, you can prepare some for emergency use..
  • ✿---- Our spring steel shim sheet assortment including 6 popular thickness（0.004", 0.008", 0.015", 0.02", 0.024", 0.03" ）to meet your various need, great value and practical..
  • ✿---- Spring steel shim sheet is made of high carbon blue tempered spring steel which has a excellent processing performance, can cut or weld according your reqirement..
  • ✿---- Spring steel shim widely used in applications which high toughness and accurance are required. Such as machine installation and maintenance, mold setting, etc.
  • ✿---- As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product..
Check Stock