Categories

Best Brass Shim Washer Kit

Tool Daily Short Pressure Washer Gun, High Replacement, M22 Thread, with 5 Nozzle Tips, 4000 PSI

  • ★ATTENTION: Not Fit GardenHose, WaterHose or YourFaucet Directly ★Pressure washer gun kit includes: 1-piece Pressure Washer Gun, 1-piece brass coupler, 1-piece Red Nozzle (0 Degree), 1-piece Yellow Nozzle (15 Degree), 1-piece Green Nozzle (25 Degree), 1-piece White Nozzle (40 Degree), 1-piece Brass soap nozzle tip (65 Degree)..
  • ★ATTENTION: Not Fit GardenHose, WaterHose or YourFaucet Directly ★ATTENTION: NOT FIT GardenHose or WaterHose. High replacement pressure washer guns works with electric or gas pressure washer..
  • ★ATTENTION: Not Fit GardenHose, WaterHose or YourFaucet Directly ★Pressure washer wand has M22 THREAD and 14 MM INNER CONNECTOR FITTING. If hose has M22 14mm fitting with 14mm inside diameter, please connect to hose directly. If hose has M22 15mm fitting with 15mm inside diameter, please connect the brass coupler to gun and hose..
  • ★ATTENTION: Not Fit GardenHose, WaterHose or YourFaucet Directly ★1/4’’ standard quick connector. Connects any accessories with 1/4’’ plug to the gun. Such as nozzles tips, pivoting coupler, foam cannon, extension wand, surface cleaner, undercarriage cleaner, water broom. Safety trigger lock to prevent unintended operation..
  • ★ATTENTION: Not Fit GardenHose, WaterHose or YourFaucet Directly ....
Check Stock

12 Pieces Brass Strip Brass Shim Stock Assortment 1 Width x 6 Length 0.002 0.004 0.006 0.008 0.012 and 0.016 Thickness Metal Shims Brass Sheet

  • ✔ ---- With 6 thicknesses to meet your different needs, this is a great value set of brass shim stock..
  • ✔ ---- Brass shim stock assortment size: 6" Length x 1" Width, 0.002", 0.004", 0.006", 0.008",0.012" and 0.016" thickness, 2 pieces for each thickness..
  • ✔ ---- Brass sheet is made of brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers..
  • ✔ ---- Metal shims brass sheet widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc..
  • ✔ ---- If you are a lover of DIY crafts, you should prepare this brass strip, because it is indeed widely used and multifunctional, you will definitely use it..
Check Stock

Faucet Washers, 58-Pack Flat and Beveled Rubber Faucet Washers and Brass Bibb Screws Assortment Replacement Kit for Repairing Faucet Leak

  • Faucet Washer: Are you still worried about the wear and tear of the gasket and the continuous leakage of the faucet? Ancable faucet washer has a good rubber seal and is specially designed for repairing leaking faucets, suitable for most kitchen faucets or bathroom sink leaking problems..
  • Easy to Use: Just match the washer size and shape to use. 52 multi-size flat washers and beveled washers with 6 brass screws for better results. Contains 10 different styles of commonly used washers, the size of which is clearly marked on the washer for easy identification and use..
  • Outstanding Durability: Faucet washer are made of high-quality rubber material, which is durable enough to withstand the rigors of daily use. Equipped with brass screws not easy to corrode. The black finish is low-profile and stain-resistant for long-term use..
  • Perfect Repair Kit: 58pack in total, enough for your replacement needs or as a spare for future use. A great addition to your home and tool kit, an inexpensive alternative that saves you on expensive faucet repairs..
  • 100% Guarantee: All Ancable products come with....
Check Stock

WOJET Sandblasting Kit, Wet Sandblaster Attachment, 5000 PSI, 1/4 Inch Quick Disconnect

  • 1/4" Plug inlet, connect to pressure washer wand with 25ft sand suction tube..
  • Made of quality material : High quality brass and stainless steel. Working pressure is 5000 PSI. Temperature is up to 140ºF/60ºC..
  • Pressure washer sand blasting attachments use dry silica sand, baking soda or washed and dried river sand..
  • Pressure washer sandblaster kit used for abrasive cleaning. Ideal for rust removing , graffiti, paint, baked on grease. ower washer sand blaster kit use baking soda, dry silica sand or washed and dried river sand..
  • WOJET MFG always care and support our customer feedback, contact our customer service if there is any reason you are not satisfied..
Check Stock

Brass Strip Brass Shim Stock Assortment 1 Width x 6 Length 0.002 0.004 0.006 0.008 0.012 and 0.016 Thickness 6 Pieces

  • With 6 thicknesses to meet your different needs, this is a great value set of brass shim stock..
  • Brass shim stock assortment size: 6" Length x 1" Width, 0.002", 0.004", 0.006", 0.008", 0.012" and 0.016" Thickness.Nicely polished up..
  • Brass sheet is made of brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers..
  • Metal sheets plates widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc..
  • Reliable service: As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product..
Check Stock

Precision Brand 17SX3 Brass Shim Stock, 6″ x 60″ Roll, 260 Alloy Brass, 0.003″

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability.
  • Used in applications where corrosion problems exist.
  • Especially useful for pilot production runs where material accuracy and economy are important.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
Check Stock

Brass Sheet Brass Shim Stock Assortment 6 Length x 4 Width 0.001 0.002 0.003 0.005 and 0.01 Thickness Metal Sheets Plates 5 Pieces

  • With 5 thicknesses to meet your different needs, this is a great value set of brass shim stock..
  • Brass shim stock assortment size: 6" Length x 4" Width, 0.001", 0.002", 0.003", 0.005" and 0.01" Thickness.Nicely polished up.
  • Brass sheet is made of brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers..
  • Metal sheets plates widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc..
  • Reliable service: As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product..
Check Stock

BOTINDO Pressure Washer Sandblasting Kit,Wet Sandblasting Attachment with Goggle,1/4 Inch Quick Disconnect,5000 PSI,Orifice 3.5 for Abrasive Cleaning

  • Includes: The pressure washer sandblasting kit includes 1 x Hose, 1 x 16" Pressure Washer Wand (water input), 1 x 15 3/4" Sand Wand(sand input),4 x....
  • Minimum Flow Rate: 3 GPM. Orifice 3.5. Max Temperature is up to 140ºF/60ºC. Minimum Pressure of power washer sandblasting kit is 3000 PSI. Max....
  • Durable and Longevity: Sand blaster kit is made of brass and stainless steel. Premium materials are resistant to corrosion, abrasion, and stable....
  • Principle: Pressure washer sand blasting attachments is suction-fed injection of sand into water system.Use dry silica sand, baking soda washed and....
  • Application: Mainly works for household and factory abrasive cleaning. Ideal tool for removing rust, graffiti, paint, grease baking, scale and other....
Check Stock

1-1/2 C360 BRASS ROUND ROD 6\ long +.07\/-0 Solid 1.50\ Diameter H02 Lathe Bar Stock

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability.
  • Used in applications where corrosion problems exist.
  • Especially useful for pilot production runs where material accuracy and economy are important.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
Check Stock

Brass Sheet Brass Shim Stock Assortment 6 Length x 3 Width 0.002 0.004 0.006 0.008 ,0.012 and 0.016 Thickness Brass Shim Stock 6 Pieces

  • With 6 thicknesses to meet your different needs, this is a great value set of brass shim stock..
  • Brass shim stock assortment size: 6" Length x 3" Width, 0.002", 0.004", 0.006", 0.008",0.012" and 0.016" Thickness. Nicely polished up..
  • Brass sheet is made of brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers..
  • Metal sheets plates widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc..
  • Reliable service: As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product..
Check Stock

Twinkle Star Pressure Washer Sandblasting Kit, Wet Abrasive Sandblaster Attachment, Dustless Sand Blasting Kit, 1/4 Inch Quick Disconnect, 5000 PSI

  • Pressure Washer Sandblasting Attachment: Includes a goggle, 10 ft hose, 16 inch pressure washer wand – water input, 17 inch sand wand – sand input, two hose clamps and extra one replacement ceramic nozzle kits..
  • High Quality: Sand blaster kit is made from durable material – brass and stainless steel. Working pressure is up to 5000 PSI. Temperature is up to 140ºF/60ºC. It has anti-corrosion and wear resistance, stable characteristics..
  • Sand Blasting Attachment: Baking soda, dry slica sand, washed and dried river sand can be use as sandblasting kit attachment..
  • Widely Use: Sandblasting kit is suction-fed injection of sand into water system, works for abrasive cleaning. Ideal for abrasive cleaning, such as removing rust, paint, graffiti, baked on grease..
  • Tips: ONLY SUITABLE FOR PRESSURE WASHER HOSE, PRESSURE WASHER, PRESSURE NOZZLE. NOT FIT FOR GARDEN HOSE..
Check Stock

FAVSTAR Pressure Washer Sandblasting Kit,Wet Sandblaster Attachment,with Replacement Nozzle Tips,5000PSI,1/4 Inch Quick Connect

  • SANDBLASTING PACKAGING KITS: Our pressure washer sandblasting includes 3m hose, 16" pressure washer wand (water input), 15 3/4" sand wand(sand input),....
  • WORKING PRINCIPLE: The pressure sandblasting kit is used to inject sand into the water system for cleaning. Use dry silica sand, baking soda or washed....
  • APPLICATION: The pressure washer sandblaster kit is mainly used to remove rust, graffiti, paint and grease baking, and is ideal for household and....
  • HIGH-QUALITY PERFORMANCE: Sandblasting kits are made of durable materials, brass and stainless steel, which are resistant to corrosion, abrasion, and....
  • EASY to USE: 1/4 inch quick connector on the end of a gun, suitable for most pressure washer..
Check Stock

Precision Brand 17SN6 Brass Shim Stock, 6″ x 18″ Flat Sheets, 260 Alloy Brass, 0.006″ (Pack of 10)

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability.
  • Used in applications where corrosion problems exist.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
  • It is especially useful for pilot production runs where material accuracy and economy are important.
Check Stock