Categories

Best Brass Shims Shim Stock

Brass Sheet Brass Shim Stock Assortment 6 Length x 3 Width 0.002 0.004 0.006 0.008 ,0.012 and 0.016 Thickness Brass Shim Stock 6 Pieces

  • With 6 thicknesses to meet your different needs, this is a great value set of brass shim stock..
  • Brass shim stock assortment size: 6" Length x 3" Width, 0.002", 0.004", 0.006", 0.008",0.012" and 0.016" Thickness. Nicely polished up..
  • Brass sheet is made of brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers..
  • Metal sheets plates widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc..
  • Reliable service: As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product..
Check Stock

Valve Spring Shim - 1.500\ OD.645\ ID .060\ Thickness

  • Must-Have for Your Next Engine Build or Spring Upgrade - Production tolerances in cylinder heads, valve lengths, valve springs, retainers and locks can impact the valve spring installed height from valve to valve, greatly impacting spring seat and open pressures. COMP Cams spring shims are a must-have to ensure precise installed height on intake and exhaust valves..
  • Guaranteed Precision - COMP Cams shims are crafted from the finest shim stock steel to precise dimensions, ensuring consistent installed height adjustments from the first valve to the last..
  • Race Tough - COMP Cams valve spring shims are not only made from the highest quality shim stock available, they are also heat treated to withstand the most radical camshaft profiles..
  • 1.500" Outside Diameter, 0.645" Inside Diameter. Includes 1 0.060" Thick Shim..
  • Recommended for use with our 916, 26056, 917, 928, 929, 924, 925, 911, 954, 936, 938, 930, 953, 999, 26094, 943, 26055, 939, 927, 919, 933, 935, 944, 26095, 26097, 932, 26089,955, 26115, 26099 and 26547 springs..
  • Available in an assortment pack under part number 4757..
Check Stock

Valve Spring Shim Kit - 1.300\ OD.520\ ID .030\ Thickness

  • Must-Have for Your Next Engine Build or Spring Upgrade - Production tolerances in cylinder heads, valve lengths, valve springs, retainers and locks can impact the valve spring installed height from valve to valve, greatly impacting spring seat and open pressures. COMP Cams spring shims are a must-have to ensure precise installed height on intake and exhaust valves..
  • Precision - COMP Cams shims are crafted from the finest shim stock steel to precise dimensions, ensuring consistent installed height adjustments from the first valve to the last..
  • Race Tough - COMP Cams valve spring shims are not only made from the highest quality shim stock available, they are also heat treated to withstand the most radical camshaft profiles..
  • 1. 300" Outside Diameter, 0. 520" Inside Diameter. Includes 16 0. 030" Thick Shims..
  • Recommended for use with ~ 1. 300" Outside Diameter or smaller like our 26915 Beehive and 7228 Conical Spring..
Check Stock

6 Pieces Brass Strip Brass Shim Stock Assortment 1 Width x 12 Length 0.002 0.004 0.006 0.008 0.012 and 0.016 Thickness,Brass Sheet Metal Shims

  • ✔ If you happen to need some brass shim stock, you do not have to drive mile to hardware store to find these, our brass shim stock assortment with 6 thicknesses to meet your different needs, this is a great value set of brass shim stock..
  • ✔ Brass flat strip is made of brass material,has nice bend-ability and good processability, excellent conductivity, you can use it according to your requirement..
  • ✔ Brass strip has high strength, high hardness. It can still work well under hot condition and has good corrosion resistance..
  • ✔ Brass shim stock assortment size: 12" Length x 1" Width, 0.002", 0.004", 0.006", 0.008", 0.012" and 0.016" Thickness. Nicely polished up..
  • ✔ Brass shim stock widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc..
Check Stock

StewMac Acoustic Guitar Neck Shims Maple - Set of 10

  • Fitting an acoustic guitar neck into a dovetail joint is precise work - many times you need to shim a loose side of a dovetail when fitting the neck.
  • This wafer thin shim stock is well made for a clean fit, and is just large enough to create a taper or wedge.
  • Maple shim stock is a problem solver in a busy repair shop, and we found this size has a million uses around the shop—from shimming a saddle, to....
  • Each shim is a 2" x 5" rectangle, approximately 0.022" (0.55mm) thick.
Check Stock

Game Room Guys Rubber Pool Table Leg Shims Varied Sizes - Set of 12

  • LEVEL YOUR POOL TABLE - Mix and Match Shims to Level Your Pool Table.
  • VARIED THICKNESS - (3) 1/32 Rubber Shim, (3) 1/16 Rubber Shim, (3) 1/8 Rubber Shim, (3) 1/4 Rubber Shim.
  • GREAT FOR BARS AND GAME ROOMS - Perfect for Commerical and Home Use.
  • LONG-LASTING RUBBER - Rubber Lasts Longer than Wood Shims.
Check Stock

Game Room Guys Rubber Pool Table Leg Shims Varied Sizes -Set of 8

  • LEVEL YOUR POOL TABLE - Mix and Match Shims to Level Your Pool Table.
  • VARIED THICKNESS - (2) 1/32 Rubber Shim, (2) 1/16 Rubber Shim, (2) 1/8 Rubber Shim, (2) 1/4 Rubber Shim.
  • GREAT FOR BARS AND GAME ROOMS - Perfect for Commerical and Home Use.
  • LONG-LASTING RUBBER - Rubber Lasts Longer than Wood Shims.
Check Stock

3 Pcs Guitar Neck Shims Made of Solid Maple Protective Guitar Neck Gasket for Bolt-on Neck 0.25° 0.5° and 1°Degree Guitar Plate for Guitar and Bass Repair

  • 【 FUNCTION 】 Guitar neck shims are used to change the angle of a bolt-on guitar neck for protection purposes. The shims are carefully angled and molded from tapered maple to provide the exact angle of tilt needed without creating an air pocket, thus protecting the guitar's neck and base from wear and damage..
  • 【 PERFECTLY RESTORE YOUR GUITAR OR BASS 】 Our guitar neck shims are ideal for repairing electric guitars and basses. They are made with a highly versatile design and can be easily customized to fit your specific needs by cutting or sanding, to protect your guitar from corrosion and improper angle damage..
  • 【 MADE OF SOLID MAPLE 】 The choice of solid maple for guitar neck shims is preferred over plastic for its better resonance, stability, and ability to produce a more beautiful sound..
  • 【 HARD MAPLE SHIM SET WITH THREE TAPERS 】 A set of three hard maple shims with tapers of 0.25, 0.5, and 1 degree, each with a rectangular shape featuring rounded edges and measuring 55 mm by 75 mm. The approximate taper specifications are 0.76 mm to 0.48 mm for the 0.25-degree shim, 0.71 mm to 0.20 mm for the 0.5-degree shim, and 1.52 mm to 0.25 mm for the 1-degree shim..
  • 【 EASY TO USE 】 To ensure a quick turnaround for a common guitar repai....
Check Stock

Handi-Shim, White HS1840WH Plastic Construction Shims/Spacers, 40 Pack, 1/8-Inch, 40, 40 Count

  • Cost 20 Percent less than the average shim and are available in four color-coded thicknesses and 15 combinations of sizes and quantities.
  • Handi-Shims form a secure, flat base with only one shim (not needing to overlap two wedge-shaped shims).
  • Made of plastic, Handi-Shims resist compression, will not rot, and can be reused in many applications.
  • Handi-Shims can serve as high-precision spacers and scribes.
  • Handi-Shims can be easily and neatly cut into smaller units for small-scale jobs and can be easily secured using a pre-drilled screw hole.
Check Stock

Allstar Performance ALL60203 Upper Control Arm Shim

  • Control arm shim is an upper type that is .125 inch thick and a dual mount design for use with 6 inch bolt spacing.
  • One-piece dual mount shims are also available in various other thicknesses if needed (all sold separately).
  • Shims allow easy adjustment of caster/camber during front end alignment.
Check Stock

Allstar Performance ALL60207 Upper Control Arm Shim

  • Control arm shim is an upper type that is . 500 inch thick and a dual mount design for use with 6 inch bolt spacing.
  • One-piece dual mount shims are also available in various other thicknesses if needed (all sold separately).
  • Shims allow easy adjustment of caster/camber during front end alignment.
Check Stock

Allstar Performance ALL60208 Upper Control Arm Shim

  • Control arm shim is an upper type that is . 750 inch thick and a dual mount design for use with 6 inch bolt spacing.
  • One-piece dual mount shims are also available in various other thicknesses if needed (all sold separately).
  • Shims allow easy adjustment of caster/camber during front end alignment.
Check Stock

9 Piece Punch & Die Set Metal Punch Tool for Cutting Coins Metal Plastic-with Clear Acrylic Guide

  • See What You Cut- Clear plate guide for easy alignment and placement Accurate to within 0.002 inch.
  • Precise Cuts- Hole punch set made from precision ground hardened alloy steel- 9 pieces for a variety of hole sizes.
  • Backed by Amazon's A-Z Guarantee with Prime available and a 1 year manufacturer guarantee.
  • Many Uses- Works well for metal shim, brass shim stock, sheet styrene, leather punch, paper, decal stock, coin ring making, and model ship building.
  • Well Oiled And Ready To Cut- Normal to see grease on the unit Capacities: 20 Gauge Steel Sheet, 13 Gauge Aluminum & Brass.
Check Stock