Categories

Best Brass Solder Ball Valve

3/4\ NPT Female Threaded IPS Ball Valve Full Port Water Stop Shut Off,Heavy Duty Lead Free Brass,Quarter Turn,Blue Handle (1-Pack)

  • 3/4" NPT Female Threaded IPS Brass Full Port Water Stop Shut Off Ball Valve ,Heavy Duty Lead Free ,Quarter Turn.
  • Heavy duty: forged Brass ball valve pressure is rated 150 psi wsp for steam and 600 psi woc for water, oil and gas.
  • 3/4" Threaded IPS Lead Free Brass Water Cut off Ball Valve.
  • Size: 3/4" IPS Brass Ball Valve Max Pressure (PSIG):150 Max. temperature: 200°F.
  • IAPMO Listed to cUPC - "Lead-Free" Compliant.
Check Stock

Soldering Iron Tip Cleaner,LXIANGN Non-slip Solder Flux Brass Tip Cleaner & Base Holder Cleaner Kit for Cleaning Soldering Irons and Tips,No Water Needed

  • ✎✎Maintain The Tip's Temperature:Replace the traditional water-permeable sponge,the solder tip cleaner is no need to use water to keep the soldering tips clean, so that will not reduce the tip's temperature, improve your working efficiency..
  • ✎✎The Dome Top Design:The soldering iron tip cleaner looks like a ball, hardened solder collects in the bottom,prevents tin slag from splashing on the workbench, keeping the working environment clean..
  • ✎✎High Quality Brass Material:The soldering iron tip cleaner is made of high quality stainless steel, the copper wire ball is made of brass material.can reduce oxide accumulation effectively and prolong soldering iron tip service life..
  • ✎✎Easy to Use: Insert the tip of the soldering iron into the wire in the mouth cleaner to remove the residual solder from the tip.The solder cleaner has two parts. You can separate the two parts to clean tin residual easily..
  • ✎✎Tip of Use:You need to wear gloves when you replace the metal wire, keep the cleaner uprightly when open it, please don't take the metal wire out to sweep the tips, or this will possibly splash the melted residual solder..
Check Stock

EZ-FLUID 1-1/2 NPT Female Threaded IPS Ball Valve Full Port Water Stop Shut Off,Heavy Duty Lead Free Brass,Quarter Turn,Blue Handle 1-Pack

  • 1-1/2" NPT Female Threaded IPS Brass Full Port Water Stop Shut Off Ball Valve ,Heavy Duty Lead Free ,Quarter Turn.
  • Heavy duty: forged Brass ball valve pressure is rated 150 psi wsp for steam and 600 psi woc for water, oil and gas.
  • 1-1/2" NPT Threaded IPS Lead Free Brass Water Cut off Ball Valve.
  • Size: 1-1/2" NPT IPS Brass Ball Valve Max Pressure (PSIG):150 Max. temperature: 200°F.
  • IAPMO Listed to cUPC - Certified to NSF 61-G - "Lead-Free" Compliant.
Check Stock

Soldering Tip Cleaner Set Solder Iron Tip Cleaning Wire and Brass Tip Cleaner Kit Include 8 Pieces Brass Wire Cleaner and 1 Piece Ball Shell Holder for Cleaning Solder Irons and Tips (Gold)

  • Nice performance: the soldering iron cleaners don't need cleaning with water, so that will not lower the temperature of the tips.
  • With a dense structure, the brass tip cleaner provides a multi-pointed touch surface for deep cleaning.
  • Quality material: the ball shell base is made of alloy material, durable and safe to withstand working in the heat.
  • Soldering tip cleaning wire ball is made of quality brass, can reduce oxide accumulation, improve work efficiency and prolong the service life of your soldering iron tip.
  • Considerate design: the cleaner holder is designed in the shape of a ball shell to collect the waste of the solder tip.
  • When you clean the solder tip, the dome shell can effectively prevent the tin residues from falling out of the container, which can keep your workbench clean.
  • Package includes: the soldering iron tip cleaner kit comes with 8 pieces of wire-typed ball cleaners and a brass holder, enough to meet your needs for use and replacement.
  • Compact and portable: the brass cleaner holder weighs about 110 g, with about 2.95 inches in height tall and 2.76 inches in width.
  • The weight of the wire brass ball is approx. 0.6 ounces/16 g.
  • With small size and light weight, the soldering tip cleaner kit is easy to carry and store, suitable for vari....
Check Stock

MTM Hydro Ball Valve for Pressure Washer Gun, Foam Cannons, High Pressure Power Washer Shut Off Valve Plated Brass 3/8” Female BSP 3000 PSI

  • PRESSURE WASHING BALL VALVE - Premium 3/8” Plated Brass Ball Valve for pressure washer guns. 3000 PSI Max Pressure rating. Max Temp 176 degrees Fahrenheit..
  • PLATED BRASS - Ball valve pressure washer made from plated brass, offering enhanced rust and corrosion resistance. Durable pressure washer accessories built for long-term use..
  • EASY SWITCHING - Power washing valve commonly found at the base of the high pressure washer gun. Enables quick shut off to switch between pressure washing guns without turning off the entire system..
  • HIGH QUALITY SEALS - High pressure ball valve with high quality PTFE (Polytetrafluoroethylene) seals for improved performance with high heat and chemicals..
  • LIGHTWEIGHT - Pressure washer shut off valve made from lightweight materials with a rounded frame. 3/8" Female BSP Inlet x 3/8" Female BSP Outlet..
Check Stock

YASI Bicycle Presta Schrader Valve Adaptor, 16PCS Brass Bike Pump Adapters, Ball Pump Needle, Balloon Inflatable Toys Nozzle Inflator Adapter, Air Pump Accessories for Standard Pump or Air Compressor

  • 【Complete Bike Valve Adapter】A complete bike tire presta and scharder valve adaptors, suitable for Dunlop valve, Presta valve, Schrader valve. Make your bicycles, motorcycles or automobiles pumping much easier..
  • 【16PCS Valve Adaptor Kit】YASI brass valve pump adapter kit included: 4 x DV/SV valve adapters, 2 x AV valve adapters, 2 x SV valve adapters, 2 x Ball pump needle, 2 x solid brass tapered inflatable nozzles and 4 x premium ABS tapered inflatable nozzles..
  • 【Ball Needle & Inflatable Nozzle】2 ball needles and 3 kinds of tapered inflatable nozzles, great for most kinds of sport balls likes basketball, football, volleyball, rugby, yoga ball and swim ring, balloon or other inflatable toys..
  • 【Premium Materials】All of these valve adapters are made of pure solid brass & premium ABS plastic, corrosion resistant with standard screw threads, strong and durable for more long time of use..
  • 【Daily Tool for Family】Easy to use and eco-friendly, kids also can easy to use the plastic tapered nozzle for inflatable toys and balloon. It’s a best choice for bike pumping, sport balls and other inflatable equipment..
Check Stock

Soldering Tip Cleaner, Wire-type Soldering Iron Tip Cleaner With Holder, Soft Coiled Brass Tip Cleaner Kit with 4 PCS Solder Tip Cleaning Wire and 1 PC Holder for Cleaning Soldering Irons and Tips

  • A Must Have For Cleaning Soldering Tips:The brass tip cleaner cleans the tip perfectly only need dip your solder iron into this spongy metal mesh. Such cleaners are used for removing solder from the tip’s surface and cleaning the working surfaces from oxidation products, which prolongs the life of the tool..
  • Time Saver:Does a great job of keeping the solder gun tip clean regardless of solder gun temp. Used 6-8 times so far and the coiled brass is still in great shape. A few dabs in this, a touch of flux, and solder away! The soldering iron tip cleaner will save you lots of time..
  • High Quality Material:The best material for these cleaners is high-quality brass and extra-strong stainless steel. A cleaner resembles the ball of spiral-shaped brass fine chips. Brass has a lower density than the solder’s tip coating material but is higher than the oxidation products on the tool surface. It is sufficient to immerse the soldering iron’s tip in the chips to remove the oxidation..
  • Cleaning With This Soldering Iron Tip Cleaner Does Not Require Water: This special cleaner does not reduce the working temperature of the tool. They are made of non-corrosive material and does not require additional time the tool’s reheating..
Check Stock

Solder Tip Cleaning Brass Wire 6 packs, Replacement Cleaning Brass Wire for Soldering Station Tip Cleaner

  • SOLDERING IRON TIP CLEANER: Effectively remove iron oxide and solder on the iron tip..
  • IMPROVE EFFICIENCY OF WELDING: Without adding water,avoid iron head cooling,no the outbreak of solder ball,improve the efficiency of welding..
  • ALUMINUM HLODER CASE: Aluminum with strong corrosion resistance..
  • COPPER WIRE BALL: The brass ball contains flux to effectively remove the iron oxide and extend the life of the iron tip..
  • ECO-FRIENDLY: No contamination risk compared to conventional tip tinners.
Check Stock

Soldering Tip Cleaner Soldering Iron Tip Cleaner Brass Tip Cleaner Kit and 6PCS Brass Ball Wire-type with 1PC Ball Shell Holder for Cleaning Solder Irons and Tips

  • A must have for cleaning soldering tips: this soldering tip cleaner cleans much better than conventional sponges, it's no need water, will not reduce the tip temperature when clean tips, also no solder ball breaks out than conventional tip tinners, improve work efficiency..
  • Advantage: the soldering tip cleaner can prevent the iron tips oxidation effectively, to prolong the life of your tip, they help to remove oxides and excess solder to preserve tip life and enable clean precise soldering..
  • Humanized Design: the ball shell and domed housing design with the hold, tin slag will not splashed on the workbench, keep a cleanly working environment..
  • Extra 6pcs replacement brass pad: brass tip cleaning ball can improve your soldering capabilities and it's way better than paper, sponge or steel wool. No contamination risk compared to conventional tip tinners..
  • Helpful and Saving time: when the iron head inserted into the brass wire tip cleaner, the tip will be cleaned thoroughly, convenient and efficient, improve work efficiency..
  • Kulannder Soldering tip cleaner is a best replacement of the traditional sponge, the tip can be cleaned thoroughly, convenient and efficient, improve work efficiency..
Check Stock

Exchilerator Ready To Brew - Efficient Wort Chiller for Home Brew Beer - 25% Faster Than Stainless Steel Chiller - Best Counter Flow Wort Chiller

  • EASY TO USE - FAST CLEAN UP. The Maxx is for a brewer with pump, without pumps or with warm chilling water..
  • USES FDA COMPLIANT copper, PEX, stainless collars, lead free solder and lead free brass fittings. Unlike garden hose designs with so called adjustable nut and ferrule fittings, the Exchilerator is skillfully soldered the full length of the fittings this leaves no place for infections to hide! (see cross sectional photo).
  • READY TO BREW MANIFOLD INCLUDED temp gauge, 1/2" s/steel tee, 1/2" s/steel close nipple, 1/2" s/steel ball valve,brass garden hose adapters and a roll of Teflon tape comes standard on the Maxx.( see photo of parts included).
  • 5 GALLONS 5 MINUTES 5 YEAR WARRANTY. YOU DESERVE THE QUALITY AND WORKMANSHIP OF THE MAXX ON YOUR PERSONAL AND UNIQUE BREW STAND!.
  • COPPER CHILLS FASTER THAN STAINLESS BUY YOURS TODAY !.
Check Stock

YELUN Garden hose shut off Valve- 3/4”Heavy Duty Brass Shut Off Valve Hose ball Valve Garden Hose Connector 2 Set

  • Solid Brass Shutoff Ball Valve Faucet Hose Adapter，3/4 in.Male * 3/4 in. Female,garden hose thread. Garden nozzle,watering tools,accurate attachment to faucet/spigot..
  • Extreme Duty Brass Shut Off valve,brass one way valve,Solid Brass Construction,no leakage，Contains 2 Set Solid Brass Shutoff Ball Valve with 4 pcs free rubber gaskets and 1 PTFE pipe seal tape.
  • Shut off valve offers easy on, off and flow control.Allows you to change out any spraying device without having to trek back and forth to the faucet to shut the water on and off.Used indoors or outdoors, you can connect hoses or hard pipes!.
  • swivel connectors for accurate attachment to garden hose ends,sprayer,outdoor faucet..
  • With 3 years product warranty， If you have any slightest problem with these products,we will 100% refund to you or replace a new set for you..
Check Stock

Guardian G1643 ABS Plastic Emergency Shower, Horizontal Mounted

  • Application: Emergency shower for horizontal mounting.
  • Shower Head: 10" diameter orange ABS plastic.
  • Valve: 1" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon seals. Furnished with stainless steel actuating arm and 29” stainless steel pull rod.
Check Stock

Propane Torch Weed Burner Torch - Weed Torch with Push Button Igniter and 6.5 ft Hose, High Output Outdoor Torch Kit for Garden Stumps Wood Ice Snow Roofing

  • ...egree Swivel Flame Mechanism. Maximum Flame length is 28 inch. Flame Back flow Prevention..
  • Satisfactory Service: We provides THREE-YEAR FACTORY WARRANTY and a return/replace policy against defects in material and workmanship..
  • Multifunctional Use: Burn wand and stumps, melt snow, sear meat or fish, light fires, solder, do wood grain burning, soften asphalt, remove paint from non-flammable surfaces..
Check Stock