Categories

Best Brass Steel Tip

Soldering Tip Cleaner Solder Tip Cleaning Wire and Holder Soft Coiled Brass Tip Cleaner Kit with 5 PCS Solder Tip Cleaning Wire and 1 PC Holder for Cleaning Soldering Irons and Tips, No Water Needed

  • ✅A must have kit for cleaning soldering tips: this soldering tip brass cleaner cleans much better than conventional sponges, it’s no need water, will not reduce the tip temperature when clean tips, also no solder ball breaks out than conventional tip tins, improve work efficiency..
  • ✅The soldering tip cleaner can prevent the iron tips oxidation effectively, to prolong the life of your tip, they help to remove oxides and excess solder to preserve tip life and enable clean precise soldering. Soldering tip cleaner wire uses high quality brass material, It is smokeless, tasteless, non-toxic, Soft coiled brass tip cleaner can reduce oxide accumulation effectively and prolong soldering iron tip service life..
  • ✅Extra 4pcs replacement brass pads: a brass tip cleaning ball can improve your soldering capabilities and it's way better than paper, sponge or steel wool. No contamination risk compared to conventional tip tinners with this soldering iron cleaner..
  • ✅Two part construction makes it easy to dispose of hardened solder that collects in the bottom.The solder cleaner has two parts, You can separate the two parts to clean tin residual easily with welding tip cleaner. the ball shell and domed housing design with the hold, tin slag will not splashed on t....
Check Stock

Real Avid Accu-Punch Hammer & Punches Set with Smart Bench Block, Combo (Hammer & Brass Punches + Bench Block) red

  • ESSENTIAL WORKBENCH TOOLS designed with Real Avid’s ingenuity: Accu-Punch Hammer and Punches Set paired up with innovative Smart Bench Block.
  • BRASS AND STEEL FLAT TIP GUNSMITHING PUNCHES: standard sized, brass and steel pin punches AND PIN ALIGNMENT TOOL.
  • 1/16", 5/64", 3/32" FLAT TIP steel punches and 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 9/32" FLAT TIP brass punches 5/16" engineering resin punch.
  • AUXILIARY TOOLS: Proprietary Pin Alignment Tool and non-marring finishing punch to make common maintenance, modification and repair tasks hassle-free.
  • SMART BENCH BLOCK: non-slip, steady work surface, helps protect finish and firearm itself from causing accidental damage. MAGNETIC: captures the small pins – prevents losing pins.
Check Stock

Solder Tip Cleaner Soldering Ion Tip Cleaning Wire and Holder Coiled Brass Sponge Tip Cleaner Kit with 7 PCS Solder Tip Cleaning Wire and 1 PC Holder for Cleaning Soldering Irons and Tips

  • ✅A must have kit for solder tip cleaner: this SINJEE soldering tip brass cleaner cleans much better than conventional sponges, it’s no need water, will not reduce the tip temperature when clean tips, also no solder ball breaks out than conventional tip tins, improve work efficiency..
  • ✅The soldering iron tip cleaner can prevent the iron tips oxidation effectively, to prolong the life of your tip, they help to remove oxides and excess solder to preserve tip life and enable clean precise soldering. Soldering tip cleaner wire uses high quality brass material, It is smokeless, tasteless, non-toxic, Soft coiled brass tip cleaner can reduce oxide accumulation effectively and prolong soldering iron tip service life..
  • ✅Extra 6pcs replacement brass pads: brass tip cleaning ball can improve your soldering capabilities and it’s way better than paper, sponge or steel wool. No contamination risk compared to conventional tip tinners with this SINJEE soldering iron cleaner..
  • ✅Two part construction makes it easy to dispose of hardened solder that collects in the bottom.The solder cleaner has two parts, You can separate the two parts to clean tin residual easily with SINJEE welding tip cleaner. the ball shell and domed housing design with the hold, tin slag w....
Check Stock

Colwood Super Pro II Woodburning KIt

  • We fully understand the processes involved in woodburning including the effect high heat has on brass. As brass softens because of the heat,....
  • For US/Canada/Mexcio - 110V ONLY. Using with any other voltage voids the product warranty. This 30W pen heats quickly and has excellent heat....
  • TRUArt Superior-quality pen features a stainless steel barrel integrated with heat and impact resistant rubber. The lightweight pen is easy to handle.....
  • This kit comes with 21 different interchangeable tips (solder point tip, razor blade tip, calligraphy tip, groove tip, dot tip, pattern transfer tip,....
  • The printed User Manual explains the parts of the pen, uses of the various nibs or tips, and safety precautions. It provides easy instructions on how....
Check Stock

Johnson Level & Tool 116 Plumb Bob, 16 oz., Brass Finish, 1 Pack

  • PLUMB BOB: This plumb bob is used by foundation contractors, excavation contractors and surveyors for lining up, transferring points or establishing a straight vertical or plumb line by connecting it with a string..
  • PRACTICAL DESIGN: The plump bob tool has a practical design with a hardened steel tip to ensure accurate measurements. It also improves the work quality along with maximum efficiency and safety..
  • QUALITY MATERIAL: This steel tip plumb bob features a brass-plated body that adds to its durability and great performance. It also has a lacquer finish, which protects it against corrosion while adding to the lifespan..
  • EASY INSTALLATION: The brass plumb bob tool has a hardened steel tip and cap that can be removed and replaced easily to offer a quick installation of a string or line..
  • PRODUCT SPECIFICATION: Johnson steel plumb bob weighs 16 oz. and is ideal for a variety of indoor and outdoor applications, including carpentry, masonry, surveying and fencing..
Check Stock

Soldering Tip Cleaner, Wire-type Soldering Iron Tip Cleaner With Holder, Soft Coiled Brass Tip Cleaner Kit with 4 PCS Solder Tip Cleaning Wire and 1 PC Holder for Cleaning Soldering Irons and Tips

  • A Must Have For Cleaning Soldering Tips:The brass tip cleaner cleans the tip perfectly only need dip your solder iron into this spongy metal mesh. Such cleaners are used for removing solder from the tip’s surface and cleaning the working surfaces from oxidation products, which prolongs the life of the tool..
  • Time Saver:Does a great job of keeping the solder gun tip clean regardless of solder gun temp. Used 6-8 times so far and the coiled brass is still in great shape. A few dabs in this, a touch of flux, and solder away! The soldering iron tip cleaner will save you lots of time..
  • High Quality Material:The best material for these cleaners is high-quality brass and extra-strong stainless steel. A cleaner resembles the ball of spiral-shaped brass fine chips. Brass has a lower density than the solder’s tip coating material but is higher than the oxidation products on the tool surface. It is sufficient to immerse the soldering iron’s tip in the chips to remove the oxidation..
  • Cleaning With This Soldering Iron Tip Cleaner Does Not Require Water: This special cleaner does not reduce the working temperature of the tool. They are made of non-corrosive material and does not require additional time the tool’s reheating..
Check Stock

Pressure Washer Turbo Tip 3000PSI Turbo Nozzle Kit 360° Rotating Presure Washer Turbo Nozzles 1/4'' Quick Connect with 5 Nozzle Tips Kit Multiple Degrees(0, 15, 25, 40,Soap) 3.0 GPM 3.0 Orifice

  • 【Turbo Spray Nozzle Kit】- The presure washer turbo nozzle is made of aluminum alloy and brass 1/4" quick connect plug with a sharp ceramic nozzle and rubber exterior resistant to oxidation and corrosion for better cleaning your garden..
  • 【Powerful Jet of Water】- 1/4" quick connect design, for use with pressure washers up to 3,600 PSI, gallons per minute: 3.0（3 GPM）, nozzle orifice size: 3.0, maximum operating temperature: 114°F. Creates 360° powerful jet of water!.
  • 【5 Pressure Washer Tip】- 1 Red 0 Degree Nozzle Tip (Stainless Steel), 1 Yellow 15 Degree Nozzle Tip (Stainless Steel), 1 Green 25 Degree Nozzle Tip (Stainless Steel), 1 White 40 Degree Nozzle Tip (Stainless Steel), 1 Black Soap Nozzle (Brass)..
  • 【200% Rotate Speed】- Turbo Tip spin in a circular motion (0 degree nozzle is a straight line)at high speeds to increase both the intensity and cleaning area of the nozzle. There is a ceramic ball inside that spins under pressure and the pattern is circular regardless of nozzle position. Turbo nozzles cleans up to 40% faster than..
  • 【Clean Any Area】- The Spray Nozzle is ideal for removing a large amount of dirty.Cleaning of soiled bricks, concrete, vinyl or any other large amount of dirt or heavily soiled areas.It can also strip p....
Check Stock

Sealey Oxyacetylene Welding & Brazing Kit

  • Professional torch kit used in Plumbing, HVAC, Refrigeration and heating applications.
  • Kit includes GA-8L EZE-Lite Tip Target Tip that solder and braze copper or steel pipe faster than conventional tips.
  • Heavy brass regulator for "B" Cylinder, quick disconnect handle with snap-in tips machined from solid brass and stainless tubing.
  • GA-8L soft solders up to 2-Inch and silver brazes up to 1-Inch.
Check Stock

Flexzion Soldering Iron Tip Cleaner, Soft Coiled Brass Wire Sponge Stainless Steel Holder with Rosin Flux

  • Our soldering tip cleaner cleans more effectively than conventional sponges. Does not require water, therefore prevents rapid cooling of the tip, preventing thermal shock and metal fatigue.
  • Reduces the rate of oxide accumulation in the tips. Avoids premature wear of soldering iron tips.
  • Soft coiled brass wire thoroughly cleans the residue on the tip, extending the service life of the tip.
  • Rosin flux coated brass allows the tips to work better and last longer.
  • Comes in with a heavy duty stainless steel container with a lid.
Check Stock

Honbay 1PCS Ebony Wood Leather Edge Burnisher Tool for Burnishing Leather Projects (4 Grooves)

  • We fully understand the processes involved in woodburning including the effect high heat has on brass. As brass softens because of the heat, excessive pressure causes it to bend and eventually break. Replace the pen and broken tip for free..
  • For US/Canada/Mexcio - 110V ONLY. Using with any other voltage voids the product warranty. This 30W pen heats quickly and has excellent heat retention. Use 30W for woodburning and 15W for leather burning.
  • TRUArt Superior-quality pen features a stainless steel barrel integrated with heat and impact resistant rubber. The lightweight pen is easy to handle. Makes it perfect for precise results. You will have more time to focus on your projects' details..
  • This kit comes with 21 different interchangeable tips (solder point tip, razor blade tip, calligraphy tip, groove tip, dot tip, pattern transfer tip, stripes tip, branding tip, knife tip, etc.).
  • The printed User Manual explains the parts of the pen, uses of the various nibs or tips, and safety precautions. It provides easy instructions on how beginners can create professional projects in no time! The kit also comes with stencil and stand..
Check Stock

Stanley 47-973 8-Ounce Brass Plumb Bob

  • Brass plumb bob ideal for use in framing, deck building, plumbing, transit location and construction applications.
  • Screw top simplifies attachment of string to center of the plumb.
  • Polished-lacquer solid brass construction resists rust.
  • Replaceable, hardened steel tip provides longer life.
Check Stock

Tool Daily Pressure Washer Nozzle Tips Multiple Degrees, 1/4 inch, 5-Pack (Orifice 3.0)

  • ATTENTION: Please see Image 2 and find the orifice you need based on working pressure and flow rate (GPM). The orifice of these nozzles are 3.0. The working pressure is up to 4000 PSI..
  • Different angle allows you to clean hard-to-reach areas quickly and easily.
  • Nozzle Tips set includes: 1 Red Stainless Steel Nozzle Tip (0 Degree), 1 Yellow Stainless Steel Nozzle Tip (15 Degree), 1 Green Stainless Steel Nozzle Tip (25 Degree), 1 White Stainless Steel Nozzle Tip (40 Degree), 1 Brass soap nozzle tip (65 Degree). Choose different angles nozzle according to the actual need.
  • Don’t use a ladder to clean or sprinkle water for tree with these nozzles.
  • More Application: Can be attached to a Quick-Connect Wand for swifter application and more.
Check Stock

Tool Daily Pressure Washer Nozzle Tips Multiple Degrees, 1/4 inch, 5-Pack (Orifice 3.5)

  • ATTENTION: Please see Image 2 and find the orifice you need based on working pressure and flow rate (GPM). The orifice of these nozzles are 3.5. The working pressure is up to 4000 PSI..
  • Different angle allows you to clean hard-to-reach areas quickly and easily.
  • Nozzle Tips set includes: 1 Red Stainless Steel Nozzle Tip (0 Degree), 1 Yellow Stainless Steel Nozzle Tip (15 Degree), 1 Green Stainless Steel Nozzle Tip (25 Degree), 1 White Stainless Steel Nozzle Tip (40 Degree), 1 Brass soap nozzle tip (65 Degree). Choose different angles nozzle according to the actual need.
  • Don’t use a ladder to clean or sprinkle water for tree with these nozzles..
  • More Application: Can be attached to a Quick-Connect Wand for swifter application and more.
Check Stock