Categories

Best Brass Tee

RapidAir MaxLINE Compressed Air Piping 1' Tee M8012 Max Line Rapid Air New

  • MaxLINE 1" piping tee fitting Part Number M8012.
  • This MaxLINE Tee is specifically designed for the MaxLINE 1" tubing made by RapidAir and is great for adding extra tubing in multiple directions or adding extra air outlets..
  • This fitting is made of solid brass and has a double o-ring seal for a no leak connection..
  • It has split ring connections for easy disassembly if needed, and is rated for 175 PSI working pressure..
  • Solid Brass with Nickel Plating for Maximum Corrosion Resistance.
Check Stock

Utah Pneumatic Dot Air Fittings Tee Union 1/4”Od 1/4” Npt Air Push Fittings Male Female brake tube fittings Push In Fitting D.O.T Approved For Sae Brake Line fittings Applications Pack Of 2

  • Typical application: Air brake systems push dot fittings pneumatic fittings brass air brake fittings dot air line fittings.
  • Maximum operating pressure of 150 psi dot air brake fittings air line fittings 1/4 dot push union dot compliant air line fittings.
  • Temperature Range:_65°F to +250°F-40°C to +93°C push-to-connect fittings ptc air fittings push lock fittings.
  • Material:CA360 ,CA377 brass push air fittings tee brass fitting airline tee fitting air fittings 1/4 dot.
Check Stock

Hromee 18 Pieces Air Coupler and Plug Kit 1/4-Inch NPT Air Hose Fittings and Compressor Accessories with Universal Quick Coupler Brass Ball Valve Swivel Air Plug and Tee Pipe Fitting

  • UNIVERSAL QUICK COUPLER - The 1/4'' NPT universal couplers (male and female) which fit Industrial (I/M), ARO (A) and Automotive (T) so you do not worry about whether it is fitting or not. Heavy duty steel air fittings are ideal for general purpose applications and the brass has good solid and durability..
  • SWIVEL QUICK PLUGS - The special design of 1/4" basic swivel body, preventing hose kinks and increasing mobility, great for air tools to reduce strain on wrist and air hose. Made of high-quality corrosion resistant zinc plated hardened steel, solid body for use of a longer life. The maximum operating pressure is 300 psi..
  • HEAVEY DUTY BALL VALVE - The ball valve is made of forged brass for corrosion resistance, ductility at high temperatures and low magnetic permeability. It has a plastic-covered lever handle for on/off manual control so can be used to give your tool full air flow to total shut-off. Designed for use on all pneumatic circuits and features a quick connect/disconnect positive seal..
  • TEE PIPE FITTING - The tee fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. It has 2 x 1/4” female and 1 x 1/4” male for connecting pipes. Pipe ....
Check Stock

Harvard Boshart 1 x 11 BRASS Tank Tee Kit installation package with BALL VALVE and CHECK VALVE Water Well Pressure Tank SQUARE D 4060 FSG2 pressure switch NO LEAD

  • (1) 1" x 11" Tank Tee(SOLID BRASS, NO LEAD CONSTRUCTION).
  • (1) Square D 30-50 Pressure switch, 40-60 available in other listing.
  • (1) 1/2" 100 psi Brass Pressure Relief Valve.
  • (1) Roll of 3/4" x 520" 3.5 mils Thread tape.
Check Stock

HYDRO MASTER 0179101 Universal Outdoor Misting System Calcium Inhibitor Filter (2 pcs)

  • [ Solid Brass Misting Nozzles and Plug ] The misting nozzles and the plug are mechanically carved from the brass rod. Each nozzle or plug contains a black gasket, good sealing..
  • [ 0.0197" Orifice (0.5 mm) Excellent Misting Effect ] The orifice of the misting nozzles and plugs is 0.5mm（0.0197"), so it will produce tiny and soft mist to make excellent cooling misting in hot summer. Diameter: 0.9cm(0.35"), Height: 1cm(0.39").
  • [ 10/24 UNC Standard Thread ] The thread of the nozzles and plugs is 10/24 UNC, and matches many kinds of tee connectors widely. Such as the 1/4" tee connector, 1/2" turn 1/4" tee connectors, standing misting nozzle connector and so on..
  • [ Product Included and Water Setting ] Product included: 10pcs mist nozzles and 2pcs mist plugs. Water Setting: 2-2.3GPH(us gal per hour), 0.2-0.6MPA. It's suggested to install less than 30pcs nozzles on one water line to make an excellent misting effect in common faucet/tap water pressure in the U.S..
  • [ Wide Range of Use in Hot Summer ] The nozzles are used in misting system to make cooling misting, the plugs are used to stop somewhere you don't want to mist some time. It's widely used to make outdoor cooling system, agriculture irrigation system, standing misting system, trampoline misting, de....
Check Stock

SharkBite 1 Inch Tee, Pack of 3, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U374LF

  • SHARKBITE BRASS PUSH TEE: This push-to-connect fitting can be used when joining pipes of the same sizes quickly and easily.
  • remove using a disconnect clip or disconnect tongs.
  • VERSATILE: Pushfit connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe.
  • EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass push tees allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • approved for underground and behind-the-wall applications with no access panels.
  • SPECS: Made with DZR forged brass, this push tee can withstand 200 degrees F and 200 PSI.
Check Stock

20 Pack Brass Misting Nozzles Replacement Heads, Low Pressure Atomizing Misting Sprayer for Patio Lawn, Landscaping, Dust Control, Outdoor Cooling Mister System, 0.016\(0.4mm) Orifice, 10/24 UNC

  • The Misting Nozzle is made of brass materials and self-sealing o-ring included which is anti-rust, durable and leak-proof. It is good choice for outdoor use with cold water..
  • The orifice of the Brass Mist Nozzle is 0.4mm（0.016"), so it will produce tiny and soft mist to make excellent cooling misting in hot summer..
  • The thread of the Mister Nozzles is standard 10/24 UNC. It can match many kinds of tee connectors widely. Such as the 1/4" tee connector, standing misting nozzle connector and so on..
  • The Brass Misting Nozzles are easy to install, which can be easily screw into any 10/24 UNC threaded mist nozzle opening.
  • The nozzles are widely used to make outdoor cooling system, fan misting, agriculture irrigation system, humidification, deck/porch cooling misting, standing misting system, trampoline misting, etc..
Check Stock

3/8 Compression Tee Valve, Standard Angle Tee Valve, 2 PCS Brass Tee Adapter 3 Way Valve Compression 3/8'' Inlet and 3/8'' Outlet, Lead Free Brass Angle Stop Valve, 3/8 Add-A-Tee Valve Connector

  • 【Lead Free Brass】Heath and environment friendly material. Lead free brass tee adapter 3 way valve compression 3/8″ inlet and 3/8″ outlet..
  • 【Advantage】Brass for corrosion resistance, have a longer using life than iron and iron galvanized products, high temperature ductility and low magnetic permeability. Built-in rubber ring for better sealing, a sealing tape included for further improving sealing performance by using on the male thread end..
  • 【Multipurpose & Easy Installation】Used for adding to an outlet water shut off valve with a washer, toilet bidet, faucet and sprayer hose etc..
  • 【Size】US standard. Thread size is 3/8″ ( also name 9/16″ ) female thread, 3/8″ male thread. Rubber gasket included..
  • 【Package Included】3/8 Inch lead free add-a-tee valve ( 2 pcs )..
Check Stock

Westbrass D326-62 Tip-Toe Bath Waste-22 Make-Up, 17 Gallon Tubing, Matte Black

  • 1-1/2 in. brass tubular bath waste assembly.
  • Two-hole faceplate with two (2) 1/4 in.-20 x 1-1/2 in. plated brass screws (D329).
  • 22-1/2 in. maximum make-up with 17 gauge brass tubes.
  • Two-hole elbow, shoe, and tee with half-ferrules included.
Check Stock

JS Jackson Supplies 10 Ft Braided Stainless Steel Supply Line, Ice Maker Hose with 1/4 In Fittings on Both Ends with 3/8 x 3/8 x 1/4 Brass Compression Outlet Stop Valve Tee Adapter For Drinking Water

  • ...rs or taste. Complete your maintenance or fix your appliances quickly and easily. This kit is designed to get the job done fast without inconveniencing yourself or other members of your household. The stop tee valve quickly and neatly connects to your current set up to divert the water where you want it to go..
  • Brass Stop Tee: This kit comes with a brass stop tee that allows you to safely use this set up for your ice makers, humidifiers, water filters and other potable drinking water applications. Stop tee measures 1/4" x 3/8" x 3/8" and is ready to connect to existing supply stops..
  • High Quality and Safe: This tubing is extremely reliable and long lasting. It is NSF 14, NSF 61 and ASME A112.18.6 certified. The copper stop tee is sturdy, durable, and long lasting. Great for both contractors and DIYers. Includes clear instructions to complete your set up quickly..
  • We are Here to Help: Please reach out with any questions or concerns. We take pride in the quality products that we offer and the care that we provide our customers. Feel free to contact us through Amazons messaging platform..
Check Stock

SharkBite 3/4 Inch x 3/4 Inch x 1/2 Inch Reducing Tee, Pack of 6, Push To Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U412LF

  • SHARKBITE BRASS PUSH REDUCING TEE: This push-to-connect fitting can be used when joining two different-sized pipes quickly and easily.
  • remove using a disconnect clip or disconnect tongs.
  • VERSATILE: Pushfit reducing tees work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • large diameter fittings (1-1/4 inches to 2 inches) require a Stiffener when connecting to PEX pipe.
  • EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass reducing tees allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use.
  • suitable for underground and behind-the-wall applications with no access panels.
  • SPECS: Made with DZR forged brass, this reducing tee can withstand 200 degrees F and 200 PSI.
Check Stock

Joywayus 1/4 Brass Barb Tee Fittings T-Shaped 3 Ways Union 1/4 ID Hose Pipe Fitting with 6pcs Stainless Steel Pipe Clamp for Water/Fuel/Air Pack of 2

  • Product Size: 1/4" ID hoses x 1/4" ID hoses x 1/4" ID hoses.
  • Branch tee for connecting and branching three hoses,easy to install.
  • Packaging Includes: 2 Brass hose tee connectors with three barb , 6 Stainless steel pipe clamps.
  • Commonly used to connect lines for air, water, fuel, oil and inert gases in a quick and simple way..
  • Material: Made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.Pipe clamps are all made of stainless steel..
Check Stock

2PCS Quick Coupler Access Tee, 1\\/4'' Valves Core Tee Adapter with Swivel Connector, Fits for Gauge Deep Vacuum Pump Manifold

  • 【WELL- DESIGNed TEE CONNECTOR 】This Quick coupler access Tee with 1/4’’male flare connector is designed to hook up a vacuum gauge/micron gauge or something else.And it can ensure there is no leaking. You can use it with security..
  • 【PREMIUM QUALITY】 This refrigerant tee adapter valves core is made of high quality Brass with durable construction , can provide you with long-lasting usage..
  • 【EASY to INSTALL】 The HAVC tee adapter is easy to operate and install with strong sealing for durability and safety.You can remove the valve core reliably..
  • 【ACCURATE DIMENSION】 One of end is Female 1/4" SAE flare FFL with valve core depressor built-in. Another two ends 1/4" SAE male flare MFL..
  • 【1 YEAR WARRANTY】 Once order this 1/4 inch tee adapter c/w valve core from us, you will enjoy 12 months warranty. If there are any questions, please feel free to contact us..
Check Stock