Best Brass Tube Pipe Fitting
DOT Brass Air Line Quick Connect Fittings Assortment, 34 Pcs DOT Push to Connect Air fittings 1/4" 3/8" 1/2" Air Fitting Kit with 1/4" Schrader Valve Air Line Fittings for Trucks or Industrial
- 【PREMIUM MATERIAL】:Our dot push to connect air fittings are made of high quality CA360 brass, meet D.O.T. FMVSS 571.106, SAE J1131 with corrosion resistance, high temperature ductility and low permeability. Long service time, air brake fitting assortment type: 1/4", 3/8", 1/2"..
- 【TYPICAL APPLICATION】:The dot air line quick connect fittings can be used with air suspension systems, copper tubing in air lines brake systems, perfect for truck /RV repair air line leak, also perfect for industrial workshops, daily garden or lawn mower repair, towing machine hose connection and so on..
- 【EASY TO INSTALL】:Pre applied red sealant for male thread for better sealing. All brass quick connect air fittings can be sealed by pushing the tube firmly into the fittings, simply depress button to remove tubing..
- 【MAX PRESSURE】:Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F(-40°C to +93°C)(Note: see tubing manufacturer's recommendations for pressure and temperature mutations).
- 【ALL IN ONE SET】: Unique DOT Air Brake fit....
Check StockBrass Pipe Fitting Coupling-1/2 x 1/2 NPT Female Chrome Plated Finish Brass Pipe Fitting Coupler with 1 Roll Copper Joint Thread Sealing Tape for Home Plumbing Pipes 1pcs-Chrome Plated
- 【MATERIAL】Our brass pipe fitting coupling is made of premium solid brass with chrome plated finish.chrome plated brass for corrosion resistance,....
- 【APPLICATION】Our brass pipe fitting coupling can apply to water, oil and fuel, LP and natural gas, and be used to connect various pipes as well as....
- 【STANDARD】Our brass pipe fitting coupling meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance..
- 【FUNCTION】1/2" female x 1/2" female NPT threads equal diameter hex nipple for connecting two female threaded pipes with same diameters. Or....
- 【SERVICE】Our QC department do 100% quality inspection on the brass pipe fitting coupling before delivery. We will do 100% refund if brass pipe....
Check StockBELEY 1/2 Inch & 3/4 Inch Olive Remover Puller Tool Removal Tool Solid Brass Copper Pipes Fitting Compression Fittings Thread Tool Puller Metric Handle Nut
- US 1/2 Inch & 3/4 Inch Ferrule Removal Tool: The olive puller is suitable for any solid brass pipe fittings with a diameter of 15mm and 22mm. Solid....
- Main Function: The olive puller uses a compression fitting to lock the nut, and takes out the used or damaged olive from the copper pipe without....
- High-Quality: The copper pipe fittings are made of solid brass. The high-quality brass makes the product sturdy and durable, with high strength, high....
- Easy to Use: The olive removal tool can remove most olives and can also increase torque, which is appropriate for various tasks. And the operation is....
- After Sales Service: We provide 7X24h service. If you have any questions about this brass tube, please feel free to reach us via email..
Check StockSharkbite Disconnect Tongs all three U711, U713 & U715
- Sharkbite Disconnect Tongs all three U711, U713 & U715.
- Allows for easy removal of Universal brass push-to-connect fitting from pipe.
- Used to remove a tube from a SharkBite push-fit fitting.
- Easy to use and very fast to Disconnect with this tool.
Check StockBulkhead Union Push to Connect Tube Fitting 3/8 In Tube OD Stainless Steel Double Threaded 5 Packs
- Bulkhead Fitting Push Connector Type : 3/8 inch, Tube OD 3/8 inch NPT.
- Bulkhead Fitting Type: Push In Straight Male Connector.
- Body:Nickel Plated Brass Seal, O-Ring NBR.
- Bulkhead Fitting Features: high pressure resistant and non tripping, all taper pipe threads are paint Teflon leakage-proof rubber, offering good seal property.
- Push Fittings are easy to install, flexible and space-saving, 360-degree rotate freely, Release rings adopt ellipse design, which can be removed conveniently.
- Fluid Admitted: Air, Vacuum, Water (No Freezing).
- Negative Pressure-100Kpa | -29.5 In Hg. Working Temperature: 0-60¡ãC | 32¡«140¡ãF. Applicable Tube:PU / PA / PE / PVC.
Check StockJoywayus 40PCS 3/8 Tube OD Brass Compression Insert Tube Fitting
- Suitable for the outer diameter of the pipe:3/8"..
- Product Material: Brass. 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
- Sleeve for a tube compression insert fitting.Connects to copper, brass, aluminum, or plastic tubing. No flaring tool required for assembly..
- Commonly used to connect lines for air,water,fuel,oil and inert gases in a quick and simple way..
- Package included: 40pcs Compression Insert. It is packed in plastic box to avoid product damage..
Check StockJoywayus 40PCS 5/16\ Tube OD Brass Compression Insert Tube Fitting
- Suitable for the outer diameter of the pipe:5/16"..
- Product Material: Brass. 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
- Sleeve for a tube compression insert fitting.Connects to copper, brass, aluminum, or plastic tubing. No flaring tool required for assembly..
- Commonly used to connect lines for air,water,fuel,oil and inert gases in a quick and simple way..
- Package included: 40pcs Compression Insert. It is packed in plastic box to avoid product damage..
Check StockLoreso Mini Copper Pipe Tubing Cutter - Mini Tube Cutter for Copper Brass Aluminum, Thin Stainless Steel for 1/8 to 1 1/8 (3-28mm) OD Pipes)
- MINI TUBING AND PIPE CUTTER – Manufactured with high-quality, heavy duty alloy steel, this tube cutter will efficiently cut copper, brass, aluminum and thin steel pipes. This pipe cutter provides a fast, economical way to do a clean cut..
- VERSATILE PIPE CUTTER FOR ALL INDUSTRIES – This copper pipe cutter is suitable for use on construction sites, HVAC and refrigeration, plumbing jobs, manufacturing, heating, decorating or even at garage repair shops.
- EASY TO OPERATE – Cut like a BOSS with Loreso manual pipe cutter, Rotate the knob to grip tube, Revolve tube cutter around the pipe, Tighten grip smoothly after each full circle until full cut..
- VARIOUS TUBE CUTS – Cut Copper, Brass, Aluminum, Thin Steel and PVC Pipes with 1/8 to 1 1/8 Inch ( 3-28mm ) Outer Diameter OD..
- STURDY ALUMINUM CAST FRAME – Tube Cutter body is made of light weight and durable Aluminum Casting, Blade is built using CNC machining with most durable and high quality Alloy Steel..
Check StockBonbo Fuel Gas Cap with Brass Hose for Honda EU2200i EU1000i EU2000i EU3000i Handi, Champion 2000watt, Westinghouse 2200watt WH2200iXLT Generators, Upgrade Extended Run (Red)
- Application - This fuel gas cap can be widely used in Honda EU2200i EU1000i, EU2000i, EU3000i Handi, Champion 2000watt, Westinghouse 2200watt WH2200iXLT generators..
- Function - As a fixed connection between plastic or rubber hose and pipe, this gas cap with brass hose fitting helps you add gasoline into generator within a safe distance, ensuring seal tight and no leakage..
- Design - The brass hose fitting has a 1/4" male end for connecting to threaded pipe, conforming to National Pipe Thread (NPT) standard and the barbed fitting for a hose is equipped with a 1/4" inside diameter..
- Material - The gas cap is made of premium CNC billet aluminum, finishing with stylish anodized red coat. And the hose fitting is made of top high quality and wear resistance brass, performing well even under extreme conditions..
- Satisfaction Guarantee - Bonbo aims to provide best products and services for our customers. If you receive broken or defective gas cap and brass hose fitting, please contact us any time, we will compensate you with 1 year warranty or 30 days full refund..
Check StockTwotrees J-Head V6 Hot End Full Kit 1.75mm 12V RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle
- 【1】Applicability & compatibility: compatible with all 1.75mm V6 Makerbot 3D printer.
- NTC connector with terminal, easy to intall..
- 【2】Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking ..
- 【3】Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistor whose temperature can up to 280°C, 12V high speed fan, radiating quickly ..
- 【4】Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm ..
- 【5】Package include: all metal V6 hotend 12v / 40w / 1.75mm / 0.4mm extruder full kit (V6 printhead + fan + fan cover + PTFE tube + pipe fitting), 1 pieces brass extrusion nozzles (1×0.4mm ) and a v6 heating block, a 2-part Teflon tube in the nozzle neck made of stainless steel..
Check StockBrass Compression Tube Pipe Fitting Connector, Straight Coupling Adapter,1/4\ Tube OD x 1/4\ NPT Male Connector 5pcs (1/4\ OD Compression x 1/4\ NPT Male)
- Tube OD Compression to NPT tube adapter for converting Standard National Pipe Thread (NPT) pipe to Aluminum, Plastic, and Copper straight compression thread pipe Tubing..
- Heavy-duty brass construction with rust proof, corrosion resistance, high temperature ductility and low magnetic permeability.
Check StockGlarks 220Pcs Brass Compression Sleeves Ferrules Tube OD 4mm 6mm 8mm 10mm 12mm 13mm 14mm 16mm Brass Compression Fitting Assortment Kit
- ♛【What You Get】: This kit include 220pcs 8 size ferrules which are suitable for 4mm, 6mm, 8mm, 10mm, 12mm 13mm 14mm 16mm outer diameter of the pipe. Wide range and enough quantity can meet your various needs..
- ♛【High Quality Material】: All our ferrules are made of high quality brass, anti-corrosion and anti-rust, they can work for a long time even in humid environment. At the same time, it also has enough strength to withstand the pressure of the pipeline..
- ♛【Product Feature】: These ferrule sleeves are light, portable and durable in use. After the installation is complete, it is tightly closed, which can offer a good sealing effect..
- ♛【Excellent Craftsmanship】: We pay attention to every detail our goods. These fittings have perfect radians and are not easy to slip during installation.
- surface is smooth and free of burrs, which will not harm your pipeline..
- ♛【Wide Application】: These sleeves are part of tube compression fitting, can be used with copper, brass, aluminum, 304 stainless steel tube, plastic tubing and other hard pipe or hose. They are easy to install and no tool required..
Check StockGsinodrs 3PCS Brass Pipe Fitting 1/2 Female NPT Thread x 1/2 Male NPT Thread Brass Hex Pipe Fittings Adaptor 1200psi High Pressure
- 【Metal Adapter】Our pipe fitting solid brass constructed, strong and wear resistant more durable than iron and iron galvanized pipe fittings. 3PCS-....
- 【Durable and Steady】Heavy duty brass pipe fitting construction has excellent performance in terms of corrosion resistance, high temperature....
- 【Widely Application】Adapter for connecting pipes or fittings of different thread types, brass is corrosion resistant and can be used in wet....
- 【Temperature Rating】Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to....
- 【Reliable Quality】The pipe fittingadapter can widely used in your life. 24 months warranty for the adapter, any issue, please contact us..
Check Stock