Best Brazing Alloys

Aufhauser SilverAlloy 56% Ag BAg-7 1/16 x 18 Flux Coated Silver Solder Brazing Rods 3 Sticks

• Fluxed coated 56% Silver brazing rods, 1/16" Core. (3 Sticks).
• For general purpose brazing of ferrous and non-ferrous alloys excluding aluminum..
• For joining and repairing of Copper, Brass, Steel, Stainless Steel and Cast Iron..
• Meets AWS A5.8 BAg-7. AMS 4763, QQB-654A Class BAg-7.

Silver Brazing Rod BCuP-5 20 Flat Bar Welding Stick JAgP-15 15% Silver Phos Welding Rods 0.050 x1/8 x14 for Air-conditioners Refrigerators and Freezers

• Material: The package includes 20PCS 15% Silver Brazing Rods BCuP-3.Silver (Ag) 4.8-5.2%.
• Copper (Cu): Rest. For the best results..
• Standard: The BCuP-5 silver brazing rod containing 15% silver, is equivalent to the American standard AWS BCuP-5 national standard BCu88PAg and L205. It has certain plasticity and is suitable for welding of copper and its alloy joints that cannot maintain a tight fit. Melting point 645-815 degrees Celsius..
• Advantage: The low temperature phosphor silver welding rod is easy to install and remove. Good fluidity during welding, can flow into small space. Low metling point 704-816℃, good fluidity during welding, molten metal can flow to small gaps.
• Application：The brass brazing rod is used for brazing of silver & silver alloy in motors, air-conditioners, meters, and refrigeration industry,Widely used in brazing of copper and copper alloys in electrical machinery, electrical appliances, glasses and other industries.
• Service: Fox Alloy Time-proven formulation.
• A team of experienced welding engineers ready to answer all your welding questions.

WeldingCity 4-pcs Low Temperature Flux Cored Zinc/Aluminum (Zn98-Al2) Brazing Rod 20″ for Joining Al-Al/Cu Alloy in HVAC/Heat Exchanger

• Premium quality flux cored low temperature Zinc/Aluminum 20″-long brazing rods Zn78-Al22, Zn98-Al2 and Zn92-Al8 series for joining Al-Al and Al-Cu alloy in HVAC, heat exchanger and refrigeration repairs..
• Flux core means no manual flux application required. Non corrosive flux and ensures good oxidation protection and capillary fill. Ideal for joining aluminum alloys of the 1000, 3000, and 6000 series as well as aluminum to copper welding..
• Good replacement to equivalent products such as Lucas Milhaupt AL822/AL802 and Harris Aluxcor Zinc-Aluminum brazing filler metals, etc..
• Brazing rod dimension: 20-in (500mm) length and .078″ (2.0mm) diameter.
• brazing temperatures as shown in spec. table in picture. Available packages: 4-pcs, 1/2-lb and 1-lb..
• U.S. based welding supplier. Strong technical support with experienced customer service to address buyer’s any question..

20 Sticks BLUEFIRE JAgP-5 1/2 lb 5% Silver Phos Copper Brazing Alloys Welding Rods Industry BCuP-3 0.050\x1/8\x14\ equivalent to HARRIS STAY SILV 5 Professional Grade Gas Soldering Torch Accessory

• 5% Silver Bearing: USA AWS A58 Class: BCuP-3 brazing alloys rods. Contents: Silver (Ag) 4.8-5.2%.
• Copper (Cu): Rest. For the best results, recommend to be use with Bluefire JFB-102S brazing flux..
• Valued Pack: Each tube contains 20 sticks of 14" long brazing rods, total 0.5 (1/2) pound in weight. GREAT SAVING!.
• Best Performances: Solidus Temperature: 1189°F / 643°C, Liquidus Temperature: 1419°F / 771°C. Recommended Joint Clearance: 0.003"/0.006.

Bernzomatic PC3 Copper-Phosphorous Brazing/Welding Rods, 3-Piece

• Copper-phosphorous brazing/welding rods ideal for use in refrigeration, electrical and plumbing jobs.
• Working temp: 1,310-1,475-Degree farenheit.
• Joins copper to copper without flux, or copper to copper alloys (brass, and bronze).

RBCuZn-C - LFB Bare Bronze Brazing Rod - 36 x 1/8 1 Lb

• LFB (bare low fuming bronze) is a general purpose oxyacetylene/brazing rod used for joining various ferrous and non-ferrous metals such as carbon steel, copper alloys, cast iron, malleable iron, stainless steel and some nickel alloys. Mechanical and physical characteristics include ductility, machineability, high strength, free flowing with good tinning action and a low melting point (1630°F).
• A “must have” filler metal for every machine shop, LFB is excellent for building up wearing surfaces or large areas where successive layers must be added.
• galvanized parts can be brazed without damaging the zinc coating. Precise balance of copper and zinc along with alloying elements of tin, iron, manganese and silicon produces weld deposits that can be easily machined but work harden once put into service.
• READ THIS: Main image is for reference only. Please check Picture #2 for an approximate quantity of rods per pound***.
• Available in different sizes: 0.045", 1/6", 3/32", 1/8", 5/32", 3/16" and 1/4".
• Available in different package weights: 1 Lb, 2 Lb, 5 Lb and 10 Lb.

Uniweld KCHP Cap n Hook Brazing/Welding Outfit Tanks Not Included

• Professional contractor grade portable oxyacetylene welding and brazing outfit-tanks not included (sold separately).
• Cap'n hook five flame tip for brazing up to 1" copper tubing-u's Patent no. 4,191,333.
• Welding/brazing tip for brazing up to 1" copper tubing and welding up to 1/8" steel.
• Centurion series regulators with Protective rubber gauge boots.
• Front valve welding handle with stainless steel ball point valves for accurate Gas control.

BLUEFIRE J9802B 1/4lb Flux Cored Low Temperature Aluminium Brazing Coil All Purpose Welding Coil for Almost All Metals Soldering Propane Torch Universal Welding Rods flux Free

• 【No Flux Needed】No additional flux is needed. BLUEFIRE brazing coil can be used directly with propane torch, which will save you a lot of money on extra flux.In addition, the coil design of brazing rods is more convenient to carry than the rod design, you can use the brazing rods coil in your pocket for repair work anywhere and whenever it's needed. A great and thoughtful design!.
• 【Universal Magic Alloy】BLUEFIRE flux cored welding coil is mainly made of zinc aluminum alloy,which can be used for brazing copper and aluminum, aluminum and aluminum, aluminum and stainless steel, aluminum and steel, etc.More specificly,BLUEFIRE flux cored welding coil can be used for brazing transformer,reactor,condenser, evaporator, radiator,motor, battery or other household appliances.You can use it to complete most of the brazing work in life..
• 【Easy to Melt and Flow】BLUEFIRE flux cored brazing rods coil can melt at 752°F and have very good fluidity with good capillary attraction.In addition, BLUEFIRE flux cored welding wire is not only corrosion-resistant, but also is post-braze cleaning unnecessary. It's characteristics of high thermal conductivity and high conductivity make the welding effect full and smooth.It fits both professionals and amateurs..

Forney 48571 Super Sil Flo Brazing Rod, 1/8-Inch, 1/2-Pound

• Super Sil-Flo brazing rod is a brazing alloy that is ideal for large and small copper tubing installations.
• Typical applications are refrigeration control valves, joining copper wires to rotor bars, electrical connections.
• T joints, wage joints and sleeves, couplings on return bends and condenser fitting.
• Sil-flo is not recommended for ferrous metals such as iron or steel.

Hot Max 24184 Aluminum Brazing Flux for Welding

• Formulated specifically for torch brazing aluminum.
• Normally used with 4047, 4043, or 1100 brazing filler alloy.
• Can also be used for furnace and automatic flame brazing operations.

Lucas-Milhaupt 99088 Flux Cored Aluminum 822

Lincoln Electric Inferno Weed Burner Propane Torch Kit w/ 10” LP Gas Hose and Flint Striker, 500,000 BTU High Output, Heavy Duty for Road Repair, Roof, Brush, Ice Snow Melter, KH825-03

• ...tting to work with propane cylinders, and a Flint Striker.
• ABOUT LINCOLN ELECTRIC: For over 125 years, Lincoln Electric has focused on the design, development and manufacture of arc welding products, automated joining, assembly and cutting systems, plasma, oxyfuel cutting, brazing and soldering alloys.

J.W. Harris Company 40022 Stay-Silv White Brazing Flux

• It is a powder flux formulated for brazing gold and silver..
• Jar of welding powder brazing flux powder welding cast consumables jewelry weld repair supply.
• There are 250 grams in this jar, which will definitely meet your needs..
• The powder melts at 700 degree centigrade.​.
• Brazing powder improves the weldability of metal in the process of high temperature welding..