Categories

Best Brazing Rod For Copper

3mm Copper Round Rod, Favordrory 20PCS Copper Round Rods Lathe Bar Stock, 3mm in Diameter 100mm in Length

  • 【Size】：5/8" OD (16mm, 4" Length(100mm).
  • 【Material】:110 Copper（The content of copper is 99.9%）.The copper rod has high purity, fine structure, extremely low oxygen content, no porosity, trachoma and looseness..
  • 【Advantage】:The electrical conductivity and thermal conductivity of copper are second only to silver, so copper rods are mainly used to make conductive and heat-conducting equipment..
  • 【Good Appearance】: The surface of the copper rod is smooth and full of metallic luster..
  • 【Wide Application】:Easy to work under hot and cold pressure.Copper rod can be used for welding and brazing.Pure copper rod is suitable for DIY hobbies,jewelry decoration and handicrafts, etc..
Check Stock

30Pcs Copper Brazing Rod Copper Phosphorus Solder Round Selffluxing Brazing Rod Copper Phosphorus Brazing Rod 25cm Copper Welding Rod for Air Conditioner Refrigerators

  • 【Perfect Welding Performance】: Our phosphor copper welding rods are mainly used in the welding field of copper and copper pipe joints of....
  • 【Easy to Use】: Standard processing with 2.5 mm diameter, the low temperature phosphor copper welding rod is easy to install and remove.This coated....
  • 【Self-flux】: Our copper welder rods owns stable performance and durability. In particular, this copper welding rod has good fluidity during....
  • 【Wide Fields of Welding】: Our copper phosphorus solders are commonly used for welding copper tubes of air conditioners and refrigerators, which....
  • 【What You Get】: Our package includes 30 pieces of copper brazing rod in 3/32-Inch diameter, and this package is about 0.66 pound. These 30pcs....
Check Stock

Goss KA-725-M12P Welding and Brazing HVAC Torch Tool Kit with Stand for \MC\ Acetylene Tanks

  • ...des enough range for working around, the included handy clip helps to hang the gas cylinder to any convenient places, gives you more move freedoms and working safety Patented Super Swirl flame tip and combustion system are specially designed to provide powerful turbo cyclone flame, resists flame blowout and reduces brazing time by 30%. Improve capacity to burn medium to relatively large copper or other metal pipes..
  • Ergonomically designed handle installed with build-in trigger start system to make it super easy to ignite the flame. Brass constructed threading regulator assure durability and reliability, pressure regulated for consistent performance even when tiled or momentarily inverted. adjustable flame control knob can easily sized flame for different applications.
  • Added 15% Silver into Phos-Copper brazing rods.A solder rod with 15% silver added can be liquid phase temperature down to 1472°F. The temperature at which it melts from a solid to a liquid is 1472°F..
  • Each 0.5 lb tube contains 19 sticks of 14" brazing rods. Significantly lower melting point:A solder rod with 15% silver added can be liquid phase temperature down to 1472°F. The melting temperature from solid to liquid is 1472°F..
  • Enhanced metallicity: The addition of silver will improve t....
Check Stock

21 Sticks BLUEFIRE BCuP-2 Half 1/2 lb Self Fluxing Phosphor Copper Brazing Alloy Welding Rods No Need for Flux 0.050 x 1/8 x 14 Industry Professional Grade Propane Gas Soldering Torch Supply

  • Self Fluxing: USA USA AWS A58 Class: BCuP-2 brazing alloys rods. Contents: Phosphor (P): 6.6-7.4%.
  • Copper (Cu): Rest. This brazing alloy is close to eutectic crystal composition. It is self fluxing and do not need any brazing flux when soldering copper to copper or copper to brass joints, while for brazing brass to brass parts, Bluefire JFB-102 brazing flux is recommended for best results..
  • Valued Pack: Each tube contains 21 sticks of 14" long brazing rods, total 0.5 (1/2) pound in weight. GREAT SAVING!.
  • Best Performances: Solidus Temperature: 1310°F / 710°C, Liquidus Temperature: 1508°F / 820°C. Recommended joint clearance: 0.002"/0.007", Fluid Rating: 5. JCuPB brazing rods contain lesser phosphors, resulting a much better plastic performances and a little higher melting points..
  • Versatile: A popular and economic solution for HVAC, Plumbing and Mechanical repairing. Ideal for gas welding, MIG and TIG welding, contact welding, HF brazing and some furnace welding. Perfect for brazing Copper to Copper, or Brass and Bronze joints in A/C, freezer, evaporator, heat exchange, water heater and etc. Cannot be used to weld iron or steel parts..
  • High Quality: All Bluefire brazing alloys are manufactured under highest quality control. Equivalent to HARRIS 0 PN0....
Check Stock

WeldingCity 4-pcs Low Temperature Flux Cored Zinc/Aluminum (Zn98-Al2) Brazing Rod 20″ for Joining Al-Al/Cu Alloy in HVAC/Heat Exchanger

  • Premium quality flux cored low temperature Zinc/Aluminum 20″-long brazing rods Zn78-Al22, Zn98-Al2 and Zn92-Al8 series for joining Al-Al and Al-Cu alloy in HVAC, heat exchanger and refrigeration repairs..
  • Flux core means no manual flux application required. Non corrosive flux and ensures good oxidation protection and capillary fill. Ideal for joining aluminum alloys of the 1000, 3000, and 6000 series as well as aluminum to copper welding..
  • Good replacement to equivalent products such as Lucas Milhaupt AL822/AL802 and Harris Aluxcor Zinc-Aluminum brazing filler metals, etc..
  • Brazing rod dimension: 20-in (500mm) length and .078″ (2.0mm) diameter.
  • brazing temperatures as shown in spec. table in picture. Available packages: 4-pcs, 1/2-lb and 1-lb..
  • U.S. based welding supplier. Strong technical support with experienced customer service to address buyer’s any question..
Check Stock

BLUEFIRE J9802B 1/4lb Flux Cored Low Temperature Aluminium Brazing Coil All Purpose Welding Coil for Almost All Metals Soldering Propane Torch Universal Welding Rods flux Free

  • 【No Flux Needed】No additional flux is needed. BLUEFIRE brazing coil can be used directly with propane torch, which will save you a lot of money on extra flux.In addition, the coil design of brazing rods is more convenient to carry than the rod design, you can use the brazing rods coil in your pocket for repair work anywhere and whenever it's needed. A great and thoughtful design!.
  • 【Universal Magic Alloy】BLUEFIRE flux cored welding coil is mainly made of zinc aluminum alloy,which can be used for brazing copper and aluminum, aluminum and aluminum, aluminum and stainless steel, aluminum and steel, etc.More specificly,BLUEFIRE flux cored welding coil can be used for brazing transformer,reactor,condenser, evaporator, radiator,motor, battery or other household appliances.You can use it to complete most of the brazing work in life..
  • 【Easy to Melt and Flow】BLUEFIRE flux cored brazing rods coil can melt at 752°F and have very good fluidity with good capillary attraction.In addition, BLUEFIRE flux cored welding wire is not only corrosion-resistant, but also is post-braze cleaning unnecessary. It's characteristics of high thermal conductivity and high conductivity make the welding effect full and smooth.It fits both professionals and amateurs..
Check Stock

Uniweld KCHP Cap n Hook Brazing/Welding Outfit Tanks Not Included

  • Professional contractor grade portable oxyacetylene welding and brazing outfit-tanks not included (sold separately).
  • Cap'n hook five flame tip for brazing up to 1" copper tubing-u's Patent no. 4,191,333.
  • Welding/brazing tip for brazing up to 1" copper tubing and welding up to 1/8" steel.
  • Centurion series regulators with Protective rubber gauge boots.
  • Front valve welding handle with stainless steel ball point valves for accurate Gas control.
Check Stock

Hot Max 24003 1/8-Inch by 36-Inch Mild Steel Brazing Rod 1#

  • General purpose copper coated mild steel brazing rod for all low carbon steels.
Check Stock

Forney 48490 Flux Coated Bronze Brazing Rod 3/32-Inch-by-18-Inch 10-Rods

  • Fluxed low fuming bronze brazing rod is a high quality, low fuming bronze brazing rod with flux.
  • Formulated for high tensile strength and ductility.
Check Stock

Supplying Demand 15% Silver Solder Brazing Rods 4 Sticks 19-1/2 Inch Length for HVAC Refrigeration

  • Rod shape is flat. Solidus temp is 1190 and the Liquidus temp is 1475.
Check Stock

Forney 48300 Bare Brass Gas Brazing Rod, 3/32-Inch-by-18-Inch, 10-Rods

  • Easy flow brazing rod makes it simple to braze aluminum and zinc based metals with an oxygen acetylene or propane torch set up.
  • Great for repairs on irrigation pipes, carburetor bowls, aluminum boats, camper covers, lawn mower housings and casings.
  • Melting point is 1620 degrees Fahrenheit.
Check Stock

Supplying Demand SW-ALCU5.5 5 Rod Pack Aluminum to Copper or Brass 8 Inch Brazing Rods Appliance Refrigeration HVAC

  • Solution temperature during heat treating must be below the solidus of the braze alloy in order to ensure integrity of the joint is maintained..
  • Joining all brazable grades of aluminum and copper.
  • Aluminum to Aluminum or Aluminum to Copper wire pigtail splices.
  • Aluminum to Copper, Aluminum to Brass or plated terminals.
  • HVAC applications with Brass, Copper, Aluminum and Steel. Is effective with any of these heat sources: Oxy-acetylene torch, Natural gas torch, MAPP Gas, Induction..
  • Quantity per pack: 5 | Rod Length: 8 inches | Shelf Life: 2 years at ambient temp. | Density (Lbs/in³): 0.19 | Recommended Brazing Temp.: 950-1000°F (510-537°C) | Liquidus: 905°F (471°C) | Solidus: 826°F (441°C) | Appearance: Silver-Colored with White Flux Channel.
  • Supplying Demand replacement parts are compatible with Major Brands, but you should always verify compatibility with your specific application..
Check Stock

MTF-5 Cap'n Hook 5-Flame Tip

  • Five flames with 100% wrap around heat for easy brazing of copper tubing..
  • Capable of brazing up to 1" copper tubing..
  • Hook tip made of tough, durable stainless steel to protect against bending.
  • Proudly made in the USA and 100% flame tested..
  • Fits Uniweld's welding handles Part# 71 or Part# WH550.
Check Stock