Categories

Best Breadboard Compatible

ACEIRMC for Arduino Nano V3.0, Nano Board CH340/ATmega328P Without USB Cable, Compatible with Arduino Nano V3.0 (6 Pack)

  • download the driver of Nano V3.0 at: http://bit.ly/2jKlJMO.
  • Nano's got the breadboard-ability of the compatible for Board and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other)..
  • The Nano is using the chips ATmega328P and CH340, not FT232 as official compatible for Arduino, so pls. use the driver from above link..
  • It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper..
Check Stock

MCIGICM 10pcs Breadboard 830 Point Solderless Prototype PCB Board Kit Protoboard MB-102 for Arduino DIY Electronics kit

  • Featuers: 10pcs large breadboard, mb-102 , 830 point prototype breadboard..
  • Solderless breadboard in breadboard kit is for diy arduino ,and you can use with breadboard jumpers wires and breadboard power supply for toys and....
  • Advantages: easy to fixed breadboard jumper wires, easy to use breadboard holder, suitable to pi breadboard kit..
  • The breadboard is made of ABS plastic, each row and columns has corresponding letters and numbers, reduce the mistake handling ..
  • We sincerely hope you have a good experience with our professional service..
Check Stock

MCIGICM 16Pcs Breadboard 400 Tie Point Solderless Prototype PCB Board Protoboard for Arduino DIY

  • Featuers: 16 pcs prototype breadboard with 400 tie point.
  • Solderless breadboard in breadboard kit is for diy arduino, and you can use with breadboard jumpers wires and breadboard power supply for toys and....
  • Advantages: easy to fixed breadboard jumper wires, easy to use breadboard holder, suitable to pi breadboard Kit..
  • The breadboard is made of ABS plastic, each row and columns has corresponding letters and numbers, reduce the mistake handling ..
Check Stock

MCIGICM 48 Pcs Mini Breadboard 170 Point Solderless Prototype PCB Board Kit for Arduino Proto Shield Distribution Connecting Blocks, 8 pcs for Each

  • Featuers: 48pcs mini breadboard, 8 pcs for each color, green/ white/ black/ red/ blue/ yellow, 170 point prototype breadboard..
  • Solderless breadboard in breadboard kit is for diy arduino ,and you can use with breadboard jumpers wires and breadboard power supply for toys and games..
  • Advantages: easy to fixed breadboard jumper wires, easy to use breadboard holder, suitable to pi breadboard kit..
  • The breadboard is made of ABS plastic, each row and columns has corresponding letters and numbers, reduce the mistake handling ..
  • Package includes: 48 X 170 tie-pointsbreadboard..
Check Stock

EPLZON Gold Plated PCB Solder-able Breadboard for DIY Electronics Projects Compatible with DIY Arduino Soldering Projects 2.05"x3.5" (5 Pack + 2 Mini Board, Black)

  • ✅This board is especially useful for preserving a prototype or experiment you just created on a solder-less breadboard by soldering all the pieces in place..
  • ✅Suitable for a variety of MCU boards, compatible with Arduino Nano, ESP8266, NodeMCU, etc.
  • suitable for various DIP type components.
  • suitable for any type of Raspberry Pi GPIO breadboard PCB..
  • ✅Gold plated finish to prevent oxidation, high quality gold finish for easy soldering,and all holes are through-plated for mounting strength.
  • ✅5pcs 2.05"x3.5" PCB Solder-able Breadboard + 2pcs 2.0"x1.5" mini PCB Solder-able Breadboard for prototyping and transferring,Black.
  • ✅Lead-free and RoHS compliant for longer shelf life.
Check Stock

Treedix 4 Sets GPIO Breakout DIY Breadboard PCB Shield Red Expansion Board Kit Compatible with Raspberry Pi 4 3 2 B+ A+

  • The breadboard can provide a good prototype development platform for Raspberry Pi, and you can build your own circuit on this breadboard and have enough room for more complex circuit designs.
  • Combining the functions of Raspberry Pi GPIO pins to achieve many different functions, you can build an electronic experiment environment.
  • Easy to assemble, prototype breadboard, compatible with GPIO, with write-protected ID EEPROM.
  • With high-quality material, gold plated finish prevents oxidation，all pads from the top to the bottom are plated with holes.
  • We strive to make our 100% meet your requirements, and do our best to satisfy you.
Check Stock

Mini Nano V3.0 ATmega328P Microcontroller Board w/USB Cable for Arduino

  • ...ou need an older driver, pls get it from GitHub—please read the link that follows immediate. http://sparks.gogo.co.nz/ch340.html.
  • More detals on how to use it please refer to: http://audiodiwhy.blogspot.com/2018/05/one-cheap-arduino-nano-clone-o-plus-one.html.
  • Small Arduino UNO Board:It is a smallest, complete and breadboard friendly board. It has everything that Arduino/Genuino UNO has (electrically) with more analog input pins and onboard +5V AREF jumper.More Breadboard Space:Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other)..
  • Specification:The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.Usage: The Nano is 100% compatible with Arduino, with the same chips ATmega328P and CH340 with the official version..
Check Stock

Hellotronics Breadboard Jumper Wires, Pack of 130 Pieces More Red and Black Male Female M/F Jumper Wire Cables Square Head 0.1'' 26AWG 5 Colors (10cm/4'' Length, Male-Female)

  • HELLOTRONICS BRAND JUMPER WIRES: The REAL 26AWG wires comes with 7 cords x 0.16mm and material in RoHs compliance, makes it more safe to use..
  • MORE COLORS AND MORE CHOICES FOR YOU: Each package comes with 5 colors by 20 pieces each, NOW with 30% MORE Red and Black Jumpers for power lines, TOTAL 130 pieces/pack. Hellotronics supplys male to male, male to female and female to female Jumper Wires with length 10cm/15cm/30cm. These Jumper Wires work great with Arduino Breadboards Raspberry Pi and really any 0.1" pitch prototyping boards..
  • MAKES PROJECT EASY: Solid quality product that makes quick jumper connections on a breadboard very easy. They will become your go-to for quick connections compatible with Arduino or FPGA board and breadboard..
  • PRE-MADE JUMPER WIRES: Their ends are solid, at the right length and proper diameter to fit in the holes of your breadboard. This makes it very easy to build or change configurations on your breadboard..
  • WHAT YOU WILL GET: You will definitely receive high quality Jumper Wires, also our worry-free 6-month warranty and friendly customer service..
Check Stock

YUEONEWIN 130 Pcs Breadboard Jumper Wires Kit 4pcs 400 & 830 Points Solderless PCB Breadboards and 126 Pcs Flexible Bread Board Jumper Wire Set for Arduino Prototyping Circuit DIY Electronic Project

  • 【Package Included】Solderless Breadboard Kit includes 2pcs 400-point breadboard, 2pcs 830-point breadboard and 126 pcs flexible breadboard jumpers,....
  • 【Material】400 and 830 connection point breadboards are made of high-quality ABS plastic panels and high-grade tin-plated phosphor bronze contacts,....
  • 【Design】There are metal strips under the breadboard board to connect with the holes on the top. Note that the top row of holes and the bottom row....
  • 【Wide Applications】This breadboard jumper kit can use 20-29 Awg (0.3-0.8mm) wires to interconnect any components, ideal for setting up test....
  • 【Service Guarantee】If you have any questions about these solderless breadboard kits, please feel free to contact us and we will reply within 24....
Check Stock

DORHEA 4Pcs for Nano V3.0 ATmega328P Nano Board CH340 5V 16M Micro USB Microcontroller Board with PIN Headers Pin Unsoldered Compatible with Electronics Development Board Nano 328P Nano 3.0

  • The Nano for motherboard can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
  • The nano has 8 analog inputs,each of which provide 10 bits of resolution.By default they measure from ground to 5 volts, though is it possible to change the upper end of their range using the analogReference function. Analog pins 6 and 7 cannot be used as digital pins, some pins have specialized functionality..
  • It is a smallest, complete and breadboard friendly board. It has everything that board has (electrically) with more analog input pins and on board +5V AREF jumper, compatible with Windows, Mac and Linux operating system..
  • More breadboard space:Nano's got the breadboard-ability of the Mini USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND ）on one top, power and ground on the other..
  • This board is using the chips ATmega328P and CH340, not FT232, Support ISP download.
Check Stock

Aoicrie Jumper Wire Kit, 840 Pieces Preformed Breadboard Jumper Wire Kit,14 Lengths Assorted Jumper Wire for Breadboard Prototyping Solder Circuits

  • This kit is the most complete Breadboard Jumper Wires set which contains high quality assorted U-Shape Jumper Wires, assorted solderless flexible jumper cables, tweezer, with which you can do all kinds of circuit experiments..
  • 2 mm, 5 mm, 7 mm, 10 mm, 12 mm, 15 mm, 17 mm, 20 mm, 22 mm, 25 mm, 50 mm, 75 mm, 100 mm, 125 mm. Note: The kit may also be equipped with a 26AWG jumper..
  • Easy to use : each jumper has stripped ends and preformed right-angled leads for easy insertion into your breadboard ,all the colored jumper wire are pre-stripped and preformed right-angled, easy to insert it into breadboard..
  • Wide Application : designed to work well with any breadboards or anywhere jumper wires are needed, perfect for breadboard projects these breadboards wires are ideal for use with any breadboard, prototyping, prototype circuits, LED strip, test circuits and etc..
  • Package includes : contains 840 pieces U shape preformed breadboard jumper wire kit, 14 lengths, 60 pieces per size,Note: the breadboard wire is a little soft that convenient for changing its shape to do connect test.
  • if you find that it can't be inserted, please check whether the cable in the pin hole of a breadboard is in good condition or not.come with a f....
Check Stock

The Complete Country Guitar Method Compilation: Three Books in One! - Master Country Guitar Licks, Techniques & Soloing (Learn How to Play Country Guitar)

  • ...ou need an older driver, pls get it from GitHub—please read the link that follows immediate. http://sparks.gogo.co.nz/ch340.html.
  • More detals on how to use it please refer to: http://audiodiwhy.blogspot.com/2018/05/one-cheap-arduino-nano-clone-o-plus-one.html.
  • Small Arduino UNO Board:It is a smallest, complete and breadboard friendly board. It has everything that Arduino/Genuino UNO has (electrically) with more analog input pins and onboard +5V AREF jumper.More Breadboard Space:Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other)..
  • Specification:The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.Usage: The Nano is 100% compatible with Arduino, with the same chips ATmega328P and CH340 with the official version..
Check Stock

SIM&NAT 12inch / 30cm 40 Pin Male to Female Dupont Wire, 40 Pin Male to Male, 40 Pin Female to Female Breadboard Jumper wire Ribbon Cables kit for Arduino Raspberry Pi 2 / 3 (120 PCS)

  • The pitch of each end of the wire is 0.1 inch (2.54mm).
  • 40 pin jumper Wire are easy to separate from the ribbon.
  • Suitable for Arduino breadboard kit project, PCB project, PC motherboard, DIY experiment, 3D printer and etc..
  • Package content: 1 * 40 pin male to female jumper wires, 1 * 40 pin male to male cable and 1 * 40-pin female to female cable (total 120pcs)Description.
  • The wires are easy to peel apart and great for making good looking prototypes.
  • Work on a Raspberry pi breadboard projects, Raspberry pi robot build, Breadboard prototyping, Arduino and ky-040 rotary encoders..
  • Insert onto the SW LED pin on the typical desktop computer mother board..
  • Test bread boarding projects or for any breadboard experimenter..
  • 1 * 11.8 inch 40 pin male to male Breadboard Jumper Wires.
  • 1 * 11.8 inch 40 pin female to female Breadboard Jumper Wires.
  • 1 * 11.8 inch 40 pin male to female Breadboard Jumper Wires.
Check Stock