Categories

Best Breakout Designs

Partsam 2Pcs UTV Tail Light Assembly, Smoked Black LED Taillight Rear Brake Stop Light Running Light Replacement for Polaris Ranger 570 Full Size XP 900 RGR GENERAL 1000 Rear Tail Light 2013-2019

  • FIMENT -- Compatible for Harley Davidson Softail Breakout CVO FXSBSE: 2013-2014, Softail Breakout FXSB: 2013-2017..
  • UPGRADED -- This Breakout LED Tail Light are a definite upgrade from the stock incandescent bulb version. More light functions, Brighter visibility, Stylish appearance..
  • LIGHT -- Bright, fast-acting LED lamps glow red when the ignition is on, and intensify when brakes are activated. Command the attention of following vehicles..
  • INSTALLATION -- Direct Replacement for your original one, no modification as required..
  • PACKAGE -- 1x LED Chopped Fender Edge Tail Light for Harley Softail Breakout.
Check Stock

OBD-II Breakout Diagnostic Box, OBD2 Pinout Tester Detector

  • The OBD-II breakout box with male and female header connectors, so that this breakout box can be placed between the vehicle and the diagnosis tool. Very handy if you want to measure CAN bus signals..
  • To provide quick access to all 16 pin connections during repair and diagnosis of the vehicle..
  • OBD-II breakout header cable length 420mm/16", to facilitate plugging in equipment..
  • Standard 4mm banana sockets. The five color sockets correspond to different pinouts, which is convenient for you to identify pinouts with different functions..
Check Stock

Treedix Breakout Board Module with Pin Board for Teensy 4.1/3.5/3.6 Compatible with Arduino

  • The breakout board expands the connection with all the processor functions, the circuit board is well-made, gold-plated on both sides to prevent oxidation.
  • Simple and easy to assemble, it can be used in conjunction with a breadboard, the distance between the holes on the board is 2.54mm.
  • Widely compatible: all pins on the breakout board are accessible, and can be used in conjunction with Arduino IDE and Arduino compatible hardware.
  • Use this breakout board module to easily extend Tennsy 4.1 project to industrial control, home automation or other applications.
  • Note: The package is not include teensy development board.
Check Stock

UMLIFE 5pcs NRF24L01+PA+LNA RF Transceiver Module with SMA Antenna 2.4 GHz 1100m + 5pcs NRF24L01 Wireless Module with Breakout Adapter On-Board 3.3V Regulator for Arduino

  • It can be wildly used to wireless remote control, somatosensory devices, RFID, NFC, smart grid, smart home, wireless audio etc..
  • 5PCS NRF24L01 8 Pin Socket Breakout Adapter Board: On-board AMS1117-3.3 chip, a simple socket breakout board which is for 8-Pin NRF24L01 wireless module.
  • 5PCS NRF24L01+PA+LNA RF Transceiver Module with SMA Antenna: Built-in 2.4Ghz antenna: available software to set the address, only received local address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers.
  • RF24L01+ Breakout Adapter: Small power on SMD LED indicator, On-board 3.3V voltage regulator, which accepts +5V power supply input and provides 3.3V for the attached "nRF24L01+" module..
  • The packing list includes: 5 * NRF24L01+PA+LNA Wireless Transceiver RF Transceiver Module.
Check Stock

Tusk Racing Axle Block Orange - Fits: KTM 250 SX-F 2005-2012

  • ️Compatibility: Front axle nut cover with Electra Glides, s and Road Kings / Road Glides / Dynas / s / V-Rod (except VRSCR and VRSCF) / Softails (except Deuce, Springer and Rocker). - davidson breakout.
  • ️Fashionable appearance: low-key appearance, stylish design and classic colors, with decorative functions, stylish appearance and improved car grade. Make your car look more dazzling. Hidden front axle hardware makes the appearance look cleaner. - davidson accessories.
  • ️High quality: For for HARLEY Axle Nut Covers is made of high-quality CNC aluminum, sturdy and durable, which maximizes durability and ensures quality. If there is a quality problem....
Check Stock

Treedix Prototype Breakout Breadboard Adapter Expansion Board for BBC Micro:bit

  • This is a connector that fits directly to the edge contacts of a BBC micro:bit. The connector has 80 pins, but because of the different widths of the micro:bit edge contacts, some of the micro:bit contacts will map to more than one of this connector's pins. Also, the back half of the pins are not used at all..
  • The edge connector gives access to all the important pins on the bottom edge of the micro:bit. Check the datasheet for the pin spacing and orientation. This connector is best used with a custom PCB..
  • This breakout board for edge connectors allows intermediate and advanced users to connect micro:bit to breadboards and other sensors, motors, LEDs, etc..
  • We can use it in many ways, it is highly recommended to use our breakout board.
  • Through the breakout board, we broke through all 21 GPIO, power and ground pins in the form of 0.1"..
Check Stock

Vilros BBC Micro:bit Breadboard Adapter/Expansion Board

  • Vilros BBC Micro:bit Breadboard Adapter/Expansion Board.
  • Make wiring your microbit a breeze with the T-Shaped Breakout board that conveniently plugs into your breadboard..
  • Important: Breakout Board Only-Does NOT include A BBC Microbit.
Check Stock

Opto 22 G4PB8 G4 8 Channel I/O Module Rack

  • Screw Terminal Block Breakout Board for Arduino MKR..
  • With the breakout board, you can easily extend Arduino MKR projects to industrial control applications..
  • PCB mount Terminal Block: pitch 5.0mm/0.197.
Check Stock

Physicians Formula Mineral Wear Talc-free Mineral Face Powder, Beige, 0.3-Ounces

  • For Extra Sensitive or Breakout-Prone Skin!.
  • Minimalist Formula Helps reduce Irritation and Breakout.
Check Stock

Wii NPPL Championship Paintball

  • Over 35+ tournaments including official NPPL and Millennium layouts and field locations like Hunting Beach, Commanders Cup, Toulouse, Malaga and more.
  • Multiple modes of play, including Career, Quickplay, Multiplayer, Tutorial and Training modes.
  • Over 110+ pieces of officially licensed gear, including parts from JT Sports, Tippmann, Spyder, Smart Parts and many others.
  • Most technologically advanced paintball AI ever includes unique situational and position-based player attributes.
  • You can use Breakout Planner to set your team's breakout strategy and firing lanes.
Check Stock

Physicians Formula Spf 16 The Healthy Powder, Ln3, 0.27 Ounce

  • Hypoallergenic, Fragrance-Free, Dermatologist Approved, Non-Comedogenic.
  • Minimalist, talc-free formula specially developed for the most sensitive and/or breakout-prone skin. Gentle formula helps to minimize the risk of irritation and breakout. Minerals help achieve a smooth, "second skin" feel and finish..
Check Stock

Adafruit ItsyBitsy M4 Express Featuring ATSAMD51

  • The Adafruit ATWINC1500 WiFi Breakout uses SPI to communicate, so with about 6 wires, you can get your wired up and ready to go. Right now the Atmel-supplied library works great with Arduino M0's and M4s but does not work on Uno (328P) and may not work on other Arduinos. You can clock it as fast as 12MHz for speedy, reliable packet streaming. And scanning/connecting to networks is very fast, a few seconds..
  • This module works with 802.11b, g, or n networks & supports WEP, WPA and WPA2 encryption. You can use it in Soft AP mode to create an ad-hoc network. For secure client connections, there is TLS 1.2 support in firmware 19.4.4!.
  • Since this is our new favoritest SPI-protocol WiFi module we've decided to make a little breakout for it. The breakout comes with level shifting on all the input pins so you can use it with 3V or 5V logic. A 3.3V voltage regulator that can handle the 300mA spikes lets you power from 3-5.5VDC..
  • There's also 3 LEDs that you can control over the SPI interface (part of the library code) or you can have controlled by the Arduino library. They'll light up when connected to an SSID, or transmitting data..
Check Stock

NPPL Championship Paintball 09 - Nintendo Wii

  • Over 35+ tournaments including official NPPL and Millennium layouts and field locations like Hunting Beach, Commanders Cup, Toulouse, Malaga and more.
  • Multiple modes of play, including Career, Quickplay, Multiplayer, Tutorial and Training modes.
  • Over 110+ pieces of officially licensed gear, including parts from JT Sports, Tippmann, Spyder, Smart Parts and many others.
  • Most technologically advanced paintball AI ever includes unique situational and position-based player attributes.
  • You can use Breakout Planner to set your team's breakout strategy and firing lanes.
Check Stock