Wilkinson WBBC Bass Bridge Brass Saddles for 4-String Precision Bass/Jazz Bass Black
- Fits many original Jazz bass and Precision bass or similar style bass, good upgrade option.
- String Spacing: 2-1/4 inch (19x3=57mm). Authentic barrel style brass saddles mounted on the correct gauge bent steel base plate creates the perfect....
- Mounting hole spacing 11/16 inch (17.50mm), bridge can be used in both string through the body and top loading.
- Genuine Wilkinson parts. Whether you are looking to replace your existing bridge or creating a hand made instrument this should be your first choice....
- Includes bridge mounting screws and saddle wrench.
Check Stock
Welding Basics: An Introduction to Practical & Ornamental Welding
- 130 AMP MIG STYLE WELDER: Mig welder is easier for beginners than tig or stick style welders. Includes welding gun, ground wire clip (1.6m), Included accessories, cleaning brush, protective mask, 110v adapter.
- GAS OR FLUX CORE: Digital MIG Welding Machine uses 0.6-0.8mm flux-cored wire. Can also be used with gas setup.
- FULL BRIDGE CIRCUIT: Full bridge circuit provides professional level stability. Make sure to avoid models with only half bridge circuits. 60% rated duty cycle allows you to weld for six minutes then rest for four minutes.
- DUAL VOLTAGE 110V/220V: MIG welder includes 220v plug and 110v adapter, machine features up to output that allows you to weld steel up to 0.08” plate steel. Supports, wire feeder 24V w/ 0.7KVA/1.8KVA maximum and minimum power.
- ADJUSTABLE SPEED WIRE FEED: Adjust up to 6.7m per minute, dial in the perfect weld. Test data supports stable performance & output voltage. Automatically adjust the inverter pulse width through closed-loop control to ensure output stability.
Check StockLion Gears 90 degree 1.37 Long with 3 Slots Low Profile Tactical Picatinny/Weaver Angle Mount,BM03D90
- Low Profile Mini Tactical Picatinny/Weaver Angle Mount.
- 90 Degree Angle, 3 Slots 1.37" Rail with 0.98" Mounting Base.
- Enough Clearance For Both Top and Side Mounting Space.
- System Oriented Design to Build a Flexible and Compact Bridge Mount Systems when Used with Lion Gear's Bridge Mounts.
- Robust Compact Steel Locking Plate & Screws - No Bulky Screws and Knobs! Threaded into Steel, not Aluminum Where Troubles Bound to Happen.
Check StockFender American Series Strat/Tele Bridge Sections/Saddles Powder Coated, Set of 6
- Fits American and American Standard Series (USA) models manufactured from '86-'07. Saddles will not retrofit to a vintage-style bridge plate due to the offset intonation screw design..
- Set of six powder-coated steel bridge sections with offset intonation screws. Intonation springs and screws included..
Check StockMusiclily Ultra 52.5mm Full Solid Brass 6-Screws PRS-Style Tremolo Bridge Knife Edge for Strat Style Electric Guitar Gold
- Fits many Mexico/Asian made Strat style guitar's tremolo bridges with 52.5mm (2-1/16") string spacing and screws spacing, like Fender Mexico, Fender Japan, thick body Squier Strat etc. Please check your guitar bridge size before buy, this bridge will NOT fit thin body guitar like Squier Bullet and Affinity..
- String spacing: 52.5mm (2-1/16" ), screw spacing: 52.5mm (2-1/16"), 6 screws mounting style..
- Knife edge + notched mounting screws design will give you a better tremolo system, 41.5mm (1-41/64") solid brass full block and steel push-in tremolo arm will bring more sustain.
- Solid brass saddle, plate and full block, stainless steel mounting screws, all of these are made with precise CNC digital controlled machining technology.
- Includes full bridge assembly set and mounting accessories.
Check StockFender American Standard Bass Bridge Assembly - Chrome
- Package includes bridge plate, four barrel-style saddles, saddle height screws, and intonation screws/springs. Does not include mounting hardware.
- Grooved and plated brass barrel-style saddles.
- Top-load or strings-thru-body bridge plate design.
Check StockMetallor 6 String Guitar Tremolo Bridge with Whammy Bar for Fender Strat Squier Style Electric Guitar Black.
- Heavy duty 6 string vintage electric guitar tremolo bridge with whammy bar for ST SQ style guitar replacement, great replacement for old or broken tremolo bridge..
- High gloss black unit with six individually adjustable, classic nickel plated steel saddles..
- The base plate is made of steel, saddles and sustain block are made of diecast zinc, durable and sturdy..
- Block Depth: 35mm, string spacing: 10.5mm(0.41inch), Spacing between mounting holes (1-6) is 52.5mm(2.07inch)..
- 100% brand new, high quality and testing is fine, includes all parts. Tremolo Unit, Arm, Springs, Claw and Screws..
Check StockDiscount Ramps Diamond Plate Loading Dock Board 60' x 60'
- 13,000 lb. Capacity loading dock board designed to ease and bridge the transition from truck to dock.
- 4,000 lbs. rated for 4-Wheel forklifts, and 2,500 lbs. rated for 3-Wheel forklifts.
- Integrated lifting chain (sides to dock board nose) allows the plate to be moved on forks.
- Heavy duty reinforced steel diamond plate with highly visible yellow curbs.
Check Stock
Ueevii 5.8G Point to Point Wireless Bridge CPE820&2 * 1-Pack Wireless Bridge Bracket Mount 360°Adjustment
- CPE820 Gigabit wireless WiFi bridge is a 5.8G Long Range WiFi Extender Outdoor CPE with a digital tube display. Point-to-point pairing can be done by dialing without having to access the GUI, avoiding the complex setup program, saving much human work and cost, and making the long-range wireless coverage, data transmission, and wireless monitoring simple and professional..
- Stainless steel material: The bracket is made of high-quality stainless steel, which has the characteristics of strong and sturdy, corrosion resistance, high temperature resistance, waterproof and lightning protection.
- 1000Mpbs digital display wireless bridge, transmission/receiver automatic networking, support point-to-point, point-to-multipoint, transmission/receiver flexible switching. WDS networking mode, video network dual compatible. The transmission speed between 2 bridges max is 1200Mbps. The highest network speed that can be achieved max is 1Gbps..
- 360°adjustment: There are many small holes on the wireless bridge bracket plate, you can adjust it for 360°, which can easily meet your installation needs at any angle.
- 1Gbps Wireless ethernet bridge conducted deep protocol optimization for wireless video surveillance transmission to ensure high-speed video transmission and sm....
Check Stock
Ueevii 5.8G Point to Point Wireless Bridge CPE830&2 * 1-Pack Wireless Bridge Bracket Mount 360°Adjustment
- CPE830 Gigabit wireless WiFi bridge is a 5.8G Long Range WiFi Extender Outdoor CPE with a digital tube display. Point-to-point pairing can be done by dialing without having to access the GUI, avoiding the complex setup program, saving much human work and cost, and making the long-range wireless coverage, data transmission, and wireless monitoring simple and professional..
- Stainless steel material: The bracket is made of high-quality stainless steel, which has the characteristics of strong and sturdy, corrosion resistance, high temperature resistance, waterproof and lightning protection.
- 1000Mpbs digital display wireless bridge, transmission/receiver automatic networking, support point-to-point, point-to-multipoint, transmission/receiver flexible switching. WDS networking mode, video network dual compatible. The transmission speed between 2 bridges max is 1200Mbps. The highest network speed that can be achieved max is 1Gbps..
- 360°adjustment: There are many small holes on the wireless bridge bracket plate, you can adjust it for 360°, which can easily meet your installation needs at any angle.
- 1Gbps Wireless ethernet bridge conducted deep protocol optimization for wireless video surveillance transmission to ensure high-speed video transmission and sm....
Check StockMetallor 4 String Bass Bridge Tailpiece Fixed Saddles for Electric Bass Guitar Jazz Bass or Precision Bass Black.
- 4 string vintage style bass bridge with saddles for top load or strings through body Jazz bass and Precision bass upgrade..
- Heavy-duty cast base assembly with four fully adjustable barrel saddles(for intonation and height level). Strings mount at the rear of the bridge..
- String spread is 57mm, Base plate is 80mm x 53mm/3.15in x 2.09in. String spacing is 19mm/0.75in..
- Zinc alloy material, black color. Includes 5pcs screws and 1pc allen wrench, for a full set, ready for use..
- The added mass in the mounting plate will add sustain and improve tone quality if you are switching to this bridge from a thinner more vintage style bridge. A great bridge for your next project, upgrade or as a replacement..
Check StockMetallor 4 String Bass Bridge Tailpiece Fixed Saddles for Electric Bass Guitar Jazz Bass or Precision Bass Chrome.
- 4 string vintage style bass bridge with saddles for top load or strings through body Jazz bass and Precision bass upgrade..
- Heavy-duty cast base assembly with four fully adjustable barrel saddles(for intonation and height level). Strings mount at the rear of the bridge..
- String spread is 57mm/2.24in, Base plate is 80mm x 53mm/3.15in x 2.09in. String spacing is 19mm/0.75in..
- Zinc alloy material, chrome color. Includes 5pcs screws and 1pc allen wrench, for a full set, ready for use..
- The added mass in the mounting plate will add sustain and improve tone quality if you are switching to this bridge from a thinner more vintage style bridge. A great bridge for your next project, upgrade or as a replacement..
Check StockMusiclily Pro 19mm 4-String Bass Hardtail Bridge with Brass Saddles and Steel Plate Black
- Fits for Squier Precision bass, Jazz bass and other similar style 4-string electric bass.
- Total string spacing: 19x3mm=57mm (2-1/4 inch), 5 mounting screw holes spacing: 17.5x4mm=70mm (2-3/4 inch).
- Authentic barrel style brass saddles mounted on the steel base plate creates the perfect reproduction vintage bass bridge as fitted to the original....
- For top-loading and string-through-body combined usage.
- Package included: 1 set bridge and mounting accessories.
Check Stock
